Sumitomo Wiring Systems

Sumitomo Electric Industries

Sumitomo Automotive Connectors,

Sumitomo Connector Housings,

Sumitomo Wire-to-Wire,

Sumitomo PCB Mount Automotive,

Sumitomo Automotive Terminals,

Sumitomo Cable Assemblies,

Sumitomo Application Specific,

Sumitomo Connector & Cable Accessories,

Sumitomo Tubing & Conduit,

 

Products

Sumitomo  Wiring harnesses for automobiles
-Aluminum wiring harnesses
-Optical fiber cables
-Harnesses for sliding doors
-Antenna harnesses
-Speed sensors for wheels

Sumitomo Wiring harness components
-Connectors

  • Unsealed connectors
  •  
  • Sealed connectors
  •  
  • PCB connectors
  •  
  • High-frequency connectors
  •  
  • Connectors for modules

-Electric wires

  • Low-voltage cables and electric wires for automotive
  •  
  • PVC conductive wires compliant with ISO
  •  
  • Aluminum wires

-Exterior equipments

  • Corrugated tubes
  •  
  • Simple protection nets
  •  
  • Grommets

Sumitomo Products for Electric Vehicles, Hybrid Vehicles, Plug-in Hybrid Vehicles
-Under-floor pipe harnesses
-Motor cables
-Charger connectors
-High-voltage junction blocks
-Bus bar modules
-Heat resistance wires

Sumitomo Electronics components
-Electronics Control Unit
-Gateway
-Junction blocks
-Relay boxes
-Power distributors
-Heater control panels

 

Sumitomo General Purpose Heat Shrink Products

They are UL, CSA, and RoHS compliant, and come in a variety of colors. They are able to operate in a temperature range of -55°C to 135°C, while providing flexibility and shape-memory plastic.

 

These products can be used in applications such as insulation, bundling, harnessing, identifying, routing, protection, and strain relief. Check out the full list of Sumitomo General Purpose Heat Shrink Products below, and discover why these are heat shrinkable solutions you can rely on.

 

  • SUMITUBE A2​

SUMITUBE A2 is used in insulation, protection and reinforcement for termination and joinings of electric wire. It can also be used for fixing and protection of cable markers.

Sumitube A2 Specifications:

  • Material: Irradiated cross-linked flexible polyolefin
  • Shrink Temperature: min 110°C
  • Shrink Ratio: Radial change min. 50%
  • Temperature Range: -55°C to 135°C
  • Longitudinal Change: 0 ±5%

Features:

  • Color: Clear
  • Flexible
  • SAE-AMS-DTL23053/5 Class 2 Approved
  • Environmental Compliance: RoHS,ELV
  • Flexible

Industry:

  • Military
  • Aerospace
  • Construction Machinery
  • Industrial Machinery
  • Electronics

 

  • SUMITUBE A4​

SUMITUBE A4 is used in insulation and protection for outdoor applications, antennas, and reinforcement for cable terminals. It is also used in color identification, bundling electrical wires and corrosion protection for pipes.

Sumitube A4 Specifcations:

  • Material: Irradiated cross-linked flexible polyolefin
  • Shrink Temperature: min 110°C
  • Shrink Ratio: 2:1
  • Temperature Range: -55°C to 105°C
  • Longitudinal Change: -15%
  • Size Range: 3/64” to 2”

Features:

  • Color: black, brown, red, orange, yellow, green, blue, purple, gray, white, clear
  • SFP Standard (R4-3684)
  • Environmental Compliance: RoHS,ELV
  • Flexible

Industry:

  • Power Supply
  • Communication
  • Construction Machinery
  • Industrial Machinery
  • Electronics

 

  • SUMITUBE B2​

SUMITUBE B2 is used in insulation, protection and reinforcement for termination, and joints of electric wire. It is also used for color identification, bundling electric wires, and insulation and protection of resistors and capacitors.

Sumitube B2 Specifications:

  • Material: Irradiated cross-linked flexible polyolefin
  • Shrink Temperature: min 90°C
  • Shrink Ratio:2:1
  • Temperature Range:-55°C to 135°C
  • Longitudinal Change:0 ± 5%
  • Size Range: 3/64” to 4”

Features:

  • Color: black, brown, red, orange, yellow, green, blue, purple, gray, white, yellow/green striped for limited sizes
  • SAE-AMS-DTL-23053/5 Class 1
  • UL/CSA Recognized
  • Environmental Compliance: RoHS, ELV
  • Flexible

Industry:

  • Automotive
  • Military
  • Aerospace
  • Construction Machinery
  • Industrial Machinery
  • Electronics

 

  • SUMITUBE B2 (3X)​

SUMITUBE B2 (3X) is used in insulation, protection and reinforcemnet or irregular shaped substrates. It is also used for color identification, and bundling electric wires

Sumitube B2 (3X) Specifications:

  • Material: Irradiated cross-linked flexible polyolefin
  • Shrink Temperature: min 90°C
  • Shrink Ratio: 3:1
  • Temperature Range: -55°C to 135°C
  • Longitudinal Change:  15%\
  • Size Range: 1.5/0.5 to 120/34

Features:

  • Color: black, brown, red, orange, yellow, green, blue, purple, gray, white
  • High Shrink Ratio
  • Flexible
  • Flame-retarded (PBDE/PBB-free)
  • UL224
  • CSA C22.2 No. 198.1
  • Environmental Compliance: RoHS,ELV

Industry:

  • Automotive
  • Construction Machinery
  • Industrial Machinery
  • Electronics

 

  • SUMITUBE B8​

SUMITUBE B8 is used in insulation, protection and reinforcement for termination and joints of electric wire which requires high strength mechanical abuse. It is also used for corrosion protection for pipes.

Sumitube B8 Specifications:

  • Material: Irradiated cross-linked, semi-rigid, flame-retarded polyolefin
  • Shrink Temperature: min 130°C
  • Shrink Ratio: 2:1
  • Temperature Range: -55°C to 125°C
  • Longitudinal Change: 0 ±5%
  • Size Range: 3/64" to 1"

Features:

  • Color: black, brown, red, orange, yellow, green, blue, purple, gray, white
  • Semi-Rigid
  • Flame-retarded (PBDE/PBB-free)
  • UL224
  • CSA C22.2 No. 198.1
  • Environmental Compliance: RoHS, ELV

Industry:

  • Automotive
  • Construction Machinery
  • Industrial Machinery
  • Electronics

 

  • SUMITUBE F2 (Z)​

SUMITUBE F2 (Z) is used in insulation and protection for outdoor applications, antennas, and reinforcement for cable terminals. It is also used in color identification, bundling electrical wires and corrosion protection for pipes.

Sumitube F2 (Z) Specifications:

  • Material: Irradiated cross-linked flexible polyolefin
  • Shrink Temperature: min 90°C
  • Shrink Ratio: 2:1
  • Temperature Range: -55°C to 125°C
  • Longitudinal Change:  0 ± 5%
  • Size Range: 3/64" to 4" 

Features:

  • Color: black, brown, red, orange, yellow, green, blue, purple, gray, white 
  • Flexible
  • SFP Standard (R4-3684)
  • Environmental Compliance: RoHS,ELV

Industry:

  • Automotive
  • Construction machinery
  • Industrial machinery
  • Electronics

 

  • SUMITUBE F4 (Z)​

SUMITUBE F4 (Z) Is used in insulation, protection, and reinforcement for termination and joints of electric wire. It is also used in color identification, building for electric wires, and insulation/protection of resistors and capacitors. 

Sumitube F4 (Z) Specifications:

  • Material: Irradiated cross-linked flexible polyolefin
  • Shrink Temperature: min 90°C
  • Shrink Ratio: Radial change min. 50%
  • Temperature Range: -55°C to 125°C
  • Longitudinal Change:  min. -15%

Features:

  • Color: black, brown, red, orange, yellow, green, blue, purple, gray, white 
  • Flexible
  • SFP Standard (R4-3684)
  • Environmental Compliance: RoHS,ELV

Industry:

  • Automotive
  • Construction machinery
  • Industrial machinery
  • Electronics

 

  • SUMITUBE NHR2

SUMITUBE NHR2 is used in insulation, protection and reinforcement for termination and joints of electric wire. It is also used for color identification and bundling for electric wires.

Basic Properties:

  • Material: Irradiated cross-linked flexible polyolefin
  • Shrink Temperature: min 100°C
  • Shrink Ratio: 2:1
  • Temperature Range: -55°C to 125°C
  • Longitudinal Change:  -5 ±5%
  • Size Range: 1/8" to 2"

Features:

  • Color: black
  • Flexible
  • SFP Standard (R4-3684)
  • Environmental Compliance: Halogen-free,RoHS,ELV

 

Industry:

  • Construction machinery
  • Industrial machinery
  • Electronics

 

  • SUMITUBE R10​

SUMITUBE R10 is used in applications that require excellent abraision and chemical resistance. This includes diesel fuel environments. R10 has good properties at low temperatures and is flame retardant. 

Sumitube R10 Specifications:

  • Material: Flexible Chlorinated Polyolefin
  • Shrink Temperature: min 150°C
  • Shrink Ratio: 2 to 1
  • Temperature Range: -75°C to 120°C, up to 200°C for short durations
  • Longitudinal Change: 1 ± 10%

Features:                                                                  

  • Color: Sumitube R10  comes in black
  • Very Flexible
  • SAE-AMS-DTL23053/1 Class 1 & 2 Approved
  • Environmental Compliance: RoHS, RoHS2, ELV
  • Flexible

Industry:

  • Military
  • Aerospace
  • Construction Machinery
  • Industrial Machinery
  • Electronics

 

Sumitomo Dual Wall Adhesive Lined Products

SUMITUBE O2B2

SUMITUBE O2B2 is used in corrosion protection of pipes, waterproof sealing for electronic devices insulation, and protection for wire joints

SUMITUBE O2B2 Specifications

  • Material: 
    • Outer: Irradiated cross-linked flexible flame-retarded polyolefin
    • Inner: Meltable adhesive
  • Shrink Temperature: min 110°C
  • Shrink Ratio: 2:1
  • Temperature Range: -55°C to 125°C
  • Longitudinal Change: min. -15%
  • Size Range: 1/8” to 2”

Features:

  • Color: Black, Brown, Red, Orange, Yellow, Green, Blue, Purple, Gray, White
  • SFP Standard (R4-3684)
  • Environmental Compliance: RoHS,ELV
  • Flexible

Industry:

  • Construction machinery
  • Industrial machinery
  • Electronics       

 

SUMITUBE O2C

SUMITUBE O2C is used in corrosion protection of pipes, waterproof sealing for electronic devices insulation, and protection for wire joints. It is also effective for fixing and waterproofing of pipe-shaped objects.

 SUMITUBE O2C Specifications

  • Material: 
    • Outer : Irradiated cross-linked flexible flame-retarded polyolefin
    • Inner : Meltable adhesive
  • Shrink Temperature: min 115°C
  • Shrink Ratio: 2:1
  • Temperature Range: -55°C to 105°C
  • Longitudinal Change: min. -15%
  • Size Range: 1/8” to 1”

Features:

  • Color: Black, Brown, Red, Orange, Yellow, Green, Blue, Purple, Gray, White
  • SFP Standard (R4-3684)
  • Environmental Compliance: RoHS,ELV
  • Flexible

Industry:

  • Construction machinery
  • Industrial machinery
  • Electronics       
  • Automotive

 

SUMITUBE W3B2

SUMITUBE W3B2 Specifications:

  • Material: 

    • Outer : Irradiated cross-linked flexible flame-retarded polyolefin

    • Inner : Meltable adhesive

  • Shrink Temperature: min 110°C

  • Shrink Ratio: 3:1

  • Temperature Range: -55°C to 110°C

  • Longitudinal Change: min. -15%

  • Size Range: 3/1 to 40/13 (Metric)

Features:

  • Color: Black, Brown, Red, Orange, Yellow, Green, Blue, Purple, Gray, White

  • SFP Standard (R4-3684)

  • Environmental Compliance: RoHS,ELV

  • Flexible

Industry:

  • Construction machinery

  • Industrial machinery

  • Electronics       

  • Automotive

 

SUMITUBE W3B2 (4X)

SUMITUBE W3B2 (4X) is used in waterproof sealing for electronic devices with irregular shapes or profiles, encapsulation for wire branches, and insulation and protection for wire joints

SUMITUBE W3B2 (4X) Specifications:

  • Material:
    • Outer: Irradiated cross-linked flexible flame-retarded polyolefin
    • Inner: Meltable adhesive
  • Shrink Temperature: min 110°C
  • Temperature Range: -55°C to 125°C
  • Longitudinal Change:min. -15%
  • Shrink Ratio: 4:1
  • Size Range: 4/1 to 52/13 (Metric)

Features:

  • Color: Black, Brown, Red, Orange, Yellow, Green, Blue, Purple, Gray, White
  • SFP Standard (R4-3684)
  • Environmental Compliance:RoHS,ELV
  • Flexible

Industry:

  • Construction machinery
  • Industrial machinery
  • Electronics
  • Automotive

 

SUMITUBE W3C

SUMITUBE W3C Specifications:

  • Material: 
    • Outer : Irradiated cross-linked flexible flame-retarded polyolefin
    • Inner : Meltable adhesive
  • Shrink Temperature: min 115°C
  • Shrink Ratio: 3:1
  • Temperature Range: -55°C to 105°C
  • Longitudinal Change: min. -15%
  • Size Range: 1/8” to 1”

Features:

  • Color: Black, Brown, Red, Orange, Yellow, Green, Blue, Purple, Gray, White
  • SFP Standard (R4-3684)
  • Environmental Compliance: RoHS,ELV
  • Flexible

Industry:

  • Construction machinery
  • Industrial machinery
  • Electronics       
  • Automotive

 

Sumitomo High Performance Products

SUMITUBE K

SUMITUBE K is used in insulation, protection, and reinforcement for termination and joints of electric wire. It is also used in protection for wire and devices which are used under high temperature or exposed to chemicals and oils, mechanical protection for metal wire, fixing and protection of cable markers, and insulation and protection of thermistors, resistors and capacitors.

Sumitube K Specifications: 

  • Material: Irradiated cross-linked semi-rigid flame-retarded PVDF
  • Shrink Temperature: min 170°C
  • Shrink Ratio: 2:1
  • Temperature Range: -55°C to 175°C
  • Longitudinal Change: 0 ±10%
  • Size Range: 3/64" to 2"

Features:

  • Color: Black, Red, Green, Blue, White, Clear
  • SFP Standard (R4-3684)
  • Environmental Compliance: RoHS,ELV

Industry:

  • Automotive
  • Military / Aerospace
  • Construction machinery
  • Industrial machinery
  • Electronics

 

SUMITUBE K2

SUMITUBE K2 is used in insulation, protection, and reinforcement for termination and joints of electric wire. It is also used in protection for wire and devices which are used under high temperature or exposed to chemicals and oils, mechanical protection for metal wire, fixing and protection of cable markers, and insulation and protection of thermistors, resistors and capacitors.

Sumitube K2 Specifications: 

  • Material: Irradiated cross-linked semi-rigid flame-retarded PVDF
  • Shrink Temperature: min 150°C
  • Shrink Ratio: Radial change min. 50%
  • Temperature Range: -55°C to 175°C
  • Longitudinal Change: -10 to 5%

Features:

  • Color: Black, Red, Green, Blue, White, Clear
  • SFP Standard (R4-3684)
  • Environmental Compliance: RoHS,ELV
  • Flame-retardent

Industry:

  • Automotive,
  • Military / Aerospace,
  • Construction machinery,
  • Industrial machinery,
  • Electronics

 

Sumitomo Solder Sleeve

H-M Series (Immersion resistant w/o lead wire, 150°C) — AS83519/1
H-ML Series (Immersion Resistant with lead wire 150°C) — AS83519/2
 

Solder Termination Sleeve(STS) products have many uses in a variety of areas ranging from commercial aircraft and military, aerospace and defense to high volume commercial applications. A tough and shrinkable sleeve made from semi-rigid crosslinked fluoroplastic will help with relief, insulation and mechanical protection with the finished product.

STS parts have a temperature indication (TI) paint on the solder rings. This means that they will change color when the right temperature has been applied. Helping you determine that the termination has been properly completed.

 

H

Solder Alloys

Content

RoHS

Solder Temp

Operating Temp

H-H = Sn96

96% Tin; 4% Silver

Yes

(221°C)

(175°C)

H = Sn63

63% Tin; 37% Lead

No

(183°C)

(150°C)

L = Cd18

18% Cadmium; 32% Lead; 50% Tin

No

(145°C)

(125°C)

E = Bi58/Sn42

58% Bismuth; 42% Tin

Yes

(138°C)

(125°C)

M

Heating Method

C = Convection / Hot Air

I = Infrared

M = Mil-Spec (thermochromic indicator) Hot Air or Infrared

L

L = Lead Wire

Dash # "X"

Size; Gauge

1-5

20 AWG

6-10

22 AWG

11-15

24 AWG

16-20

26 AWG

B = Braid

Dash # "XXXX" = Size; Length; Plating (T= Tin, N= Nickel, S= Silver)

Sizes 1-5 available in various lengths & plating types (call SEIP Customer Support for Detailed part #) 

X

 Sleeve Sizes 

1 = Smallest
2 = Largest 

(for leadwire products, dash #s = 1-5, 6-10, 11-15, 16-20, respectively)

 

 

AS83519/1 & 2 (150°C)

Convection or Infrared Applications
Sn63 (RMA flux)

Size

Cable OD Range

No Preinstalled Wire

Preinstalled 20 AWG Wire
(M227559/32-20-90)

Preinstalled 22 AWG Wire
(M227559/32-22-90)

Preinstalled 24 AWG Wire
(M227559/32-24-90)

Preinstalled 26 AWG Wire
(M227559/32-26-90)

 

Inches

SEIP

AS(MIL)

SEIP

AS(MIL)

SEIP

AS(MIL)

SEIP

AS(MIL)

SEIP

AS(MIL)

1

0.20-.105

H-M-1

M83519/1-1

H-ML-1

M83519/2-1

H-ML-6

M83519/2-6

H-ML-11

M83519/2-11

H-ML-16

M83519/2-16

2

.030-.145

H-M-2

M83519/1-2

H-ML-2

M83519/2-2

H-ML-7

M83519/2-7

H-ML-12

M83519/2-12

H-ML-17

M83519/2-17

3

.050-.200

H-M-3

M83519/1-3

H-ML-3

M83519/2-3

H-ML-8

M83519/2-8

H-ML-13

M83519/2-13

H-ML-18

M83519/2-18

4

.070-.255

H-M-4

M83519/1-4

H-ML-4

M83519/2-4

H-ML-9

M83519/2-9

H-ML-14

M83519/2-14

H-ML-19

M83519/2-19

5

.100-.300

H-M-5

M83519/1-5

H-ML-5

M83519/2-5

H-ML-10

M83519/2-10

H-ML-15

M83519/2-15

H-ML-20

M83519/2-20

 

 

Part Number

Solder Melt Temp

Operating Temperature

Sleeve Size

AWG Size

Sumitomo

M83519/1-2Buy Now

183°C

150°C

2

N/A

H-M-3

M83519/1-3Buy Now

183°C

150°C

3

N/A

H-M-3

M83519/1-5Buy Now

183°C

150°C

5

N/A

H-M-5

M83519/2-1Buy Now

183°C

150°C

1

20

H-ML-1

M83519/2-2Buy Now

183°C

150°C

2

20

H-ML-2

M83519/2-3Buy Now

183°C

150°C

3

20

H-ML-3

M83519/2-4Buy Now

183°C

150°C

4

20

H-ML-4

M83519/2-8Buy Now

183°C

150°C

8

22

H-ML-8

M83519/2-9Buy Now

183°C

150°C

9

22

H-ML-9

M83519/2-12Buy Now

183°C

150°C

12

24

H-ML-12

M83519/2-13Buy Now

183°C

150°C

13

24

H-ML-13

M83519/2-14Buy Now

183°C

150°C

14

24

H-ML-14

M83519/2-18Buy Now

183°C

150°C

18

26

H-ML-18

 

 

Türkiyede  Sumitomo Wiring Systems ürünleri ile ilgili  uygun rekabetçi fiyatları almak için müşteri temsilcimiz ile  http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu  doldurarak mesaj bırakmanız halinde satış mühendislerimiz en kısa zamanda sizinle irtibat kuracaklardır

Sumitomo Wiring Systems markasına ait tüm ürünler

    0 kayıt bulundu

      ALFABETİK MARKA LİSTESİ

      Ürün Gruplarına Göre Filtrele

      Sertifikalarımız

      Oruçreis Mah. Tekstilkent Tic. Mrk.
      G2 Blok, No:101 (10AD-Z77)
      34235 Esenler / ISTANBUL
      T: +90 212 235 95 35 / 36
      F: +90 212 235 95 37

      info@imajteknik.com

      E-Bülten Listemize üye olun !

      Gelişmelerden haberdan olmak ve ileride gerçekleştirilecek yeniliklerimizden haberdan olabilmek için e-posta adresinizi bizimle paylaşın!

      Copyright 2014 İmaj Teknik - Tüm hakları saklıdır.