Shear Beam Series KM302 up to 500 N Key Data Nominal Load: From 0..30 N to 0..500 N Output Signal: 2 mV/V Output: Without Amplifier Direction of Force: Tension and Compression Design: Shear Beam Protection Class: IP65

MEGATRON Elektronik Magnetostrictive Linear Transducer Series PMS Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,In the displacement sensor series PMS the mechanical detection of linear movement is done by a guided or free cursor, in which magnets are casted in sealing compound. In the IP67 sealed housing the magentostrictive sensor element and the electronic runtime measurement device are integrated. The position evaluation of the magnetic cursor is transformed contactless into a linear analog signal 0…10V or 4…20mA. The magnetostrictive measurement principle is true power on with high sample rates up to 1ms and delivers absolute values in very high accuracy. Up to ±0,02% linearity and up to 10µm resolution is technical feasible for the analog version of the PMS series. In relation to 1000mm stroke f.e., 10µm is a very accurate value in view of resolution. A special feature of the magnetostrictive method is the great tolerance in mechanical offset up to ±2mm in vertically and horizontally position of the free magnetic cursor. This permits applications with critical shock or vibration influences. The combination of very high accuracy and robust construction in IP 67 sealing gives the magnetostrictive PMS series a high performance for linear motion measurement from 50 up to 4000mm even in heavy duty applications.

MEGATRON Elektronik Power Resistors SUT Series Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,SUT- Precision Power Resistors have a special compacted design for a space saving construction. The wrapping of the resistor consits of a high temperature resistive Silicon - Epoxy compound. This allows the use also under difficult environmental conditions. The production process of the UTS resistors is under a 100% quality control. UT resistors are MIL certified. Typical applications are current and voltage control units, power and charging management systems, electronics for renewable energy systems, automotive etc.

MEGATRON Elektronik Universal Precision Resistors NC617 Series Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,NC Precision Resistors are often used in simple measurement and control applications. Because of their low inherent noise and insignificant inductance they are suitable for most electronic applications. Metal Film resistors have a long tradition, they are under development and improvement since many years. Pricewise they are the most economically solution for precision resistors

MEGATRON Elektronik Magnetostrictive Linear Transducer Series OMS Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,The OMS series is the economic version of the magnetostrictive sensor series with the advanced printed coil technology. The mechanical detection of linear movement is done by a guided or free cursor, in which magnets are casted in sealing compound. In the IP65 sealed housing the magentostrictive sensor element with the compact printed coil technology and the electronic runtime measurement are integrated. The position evaluation of the magnetic cursor is transformed contactless into a linear analog signal 0,1..10,1 V or 4..20 mA. The magnetostrictive measurement principle is true power on with high sample rates up to 1 ms and delivers absolute values in high accuracy. A special feature of the magnetostrictive method is the great tolerance in mechanical offset up to ±2 mm in vertically and horizontally position of the free magnetic cursor. This permits applications with critical shock or vibration influences. The combination of high accuracy with ±0,04% linearity and robust construction in IP 65 sealing gives the magnetostrictive OMS series a good price performance ratio for linear motion measurement from 50 up to 1500 mm even in heavy duty applications.