MEGATRON Elektronik Finger Joysticks Miniature Joystick Series 812 Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,The 812 series is avialable with severeal different handle options. These small joysticks are recommended for tasks with one to three axes, and where space is limited

IMA2 DMS amplifier is a complete signal processing unit for force or pressure transducers based on straingages. Most of commonly used output signals (0..5 V, 0..10 V, ±5 V, ±10 V, 0..20 mA, 4..20 mA) are available. The amplifier housing (Phoenix / UEGM) is designed for mounting rails. Offset and gain could be easily adjusted by trim-potentiometers at front side.

MEGATRON Elektronik Contactless Hall Effect Encoder Series ENA28 - EcoTurn® Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,Economic sensor with analog output - in many cases replacement for precision potentiometers

MEGATRON Elektronik Inductive Transducer Series EDCT with Integrated Electronics Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,For more comfortable electronic integration of inductive displacement sensors the economic EDCT series is realized. The mechanical detection of linear movement is done by a front guided push rod with accurate sleeve bearing and outside spring return device. The inductive measurement principle of the EDCT is configured with a casted spool in LVDT winding and a transformation core mounted on the push rod. In addition to the coil the electronic amplifier is placed in the sensor housing. The integrated electronic converts the position feedback signal of the core between the LVDT coils into the typical form of 0..10 V or 4..20 mA. Due to the contactless measurement principle long lifetime can be reached and permits high dynamic application, especially if small oscillating movement has to be detected. The inductive measurement delivers absolute values, is true power on and has high resolution also for movement in micro step. With IP40 protection and ±0,7% independent Linearity the EDCT is the economic version for the inductive linear transducer series.

MEGATRON Elektronik Potentiometric Linear Transducer Series RC20 Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,The construction of the displacement sensor series RC20 in the IP60 protection version is similar to the RC13 series. If sufficient space is available in the application the more robust RC20 sensor version can be integrated up to 300mm measurement stroke. The mechanical detection of linear movement is done by a front guided push rod with accurate sleeve bearings. For mechanical coupling the RC20 series provides three mounting versions: flange, ball joints or mounting brackets. To ensure high accuracy and long lifetime for a good price performance ratio the potentiometric measuring principle is realized with a high-resolution conductive plastic resistance element. Since the potentiometric measuring principle delivers absolute values and requires no electronic conversion, the position feedback signal is true power on without delay, temperature stable and robust against EMC influences. Customization on the cable in length or finishing with plug connector is available on request