IMA2-R amplifiers are complete signal processing units for potentiometric transducers and convert potentiometric output signals to standardized signals. The connected sensor is powered with 5 V by default (supply voltages between 0 and 10 V could be realised on request) Most of commonly used output signals (0..5 V, 0..10 V, ±5 V, ±10 V, 0..20 mA, 4..20 mA) are available. The amplifier housing (Phoenix / UEGM) is designed for mounting rails.

MEGATRON Elektronik Potentiometric Linear Transducer Series CR18 Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,In the displacement sensor series CR18 the mechanical detection of linear movement is done by a front and rear guided push rod with accurate sleeve bearings and outside spring return device. This construction makes the CR18 sensor robust for linear motion operation with spring return device. Due to his compact industrial design with 18x18mm in the profile and his spring return device a space saving and easy integration can be reached up to 100mm measurement stroke. To ensure high accuracy and long lifetime for a good price performance ratio the potentiometric measuring principle is realized with a high-resolution conductive plastic resistance element. Since the potentiometric measuring principle delivers absolute values and requires no electronic conversion, the position feedback signal is true power on without delay, temperature stable and robust against EMC influences. For mounting the CR18 has four fixing clamps which are included in the scope of supply. The CR18 sensor is available with plug or cable connection.

MEGATRON Elektronik Potentiometric Linear Transducer Series MM Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,In the displacement sensor series MM the mechanical detection of linear movement is done by a rear and front guided push rod with accurate sleeve bearings. The push rod can be equipped with an inside spring return device. Due to his small design and M3 bushing threads with 10mm diameter flange construction on the front side the MM provides a very space saving and easy integration up to 30 mm measurement stroke. To ensure high accuracy and long lifetime for a good price performance ratio the potentiometric measuring principle is realized with a high-resolution conductive plastic resistance element. Since the potentiometric measuring principle delivers absolute values and requires no electronic conversion, the position feedback signal is true power on without delay, temperature stable and robust against EMC influences. Customization on the push rod (length, thread, flat ...) is available on request

MEGATRON Elektronik Potentiometric Linear Transducer Series MSL38 Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,In the displacement sensor series MSL38 the mechanical detection of linear movement is done by a slider cursor. The cursor construction of the MSL38 provides space saving integration up to 2000mm measurement stroke. To avoid vertical or angular misalignment a link ball is integrated in the cursor sled. For rough environmental conditions we recommend mounting the sensor in overhead position. A drip edge and a special cover under the sled prevent ingress of dust into the sensor. To ensure high accuracy and long lifetime for a good price performance ratio the potentiometric measuring principle is realized with a high-resolution conductive plastic resistance element. Since the potentiometric measuring principle delivers absolute values and requires no electronic conversion, the position feedback signal is true power on without delay, temperature stable and robust against EMC influences.

MEGATRON Elektronik Incremental Hall-Effect Absolute Encoder Series MIB28 Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır,, The MIB28 is a very rugged and versatile angle sensor. The ball bearings and the contactless measurement principle ensure best life time.