MEGATRON Elektronik Potentiometric Linear Transducer Series CLP13 Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,In the displacement sensor series CLP13 the mechanical detection of linear movement is done by front guided push rod with accurate sleeve bearings. The push rod can be equipped with an inside spring return device. Due to the small profile design, the front guided push rod and with the four hollow rivets in the housing the CLP13 sensor provides a space saving and easy integration up to 100 mm measurement stroke. To ensure high accuracy and long lifetime for a good price performance ratio the potentiometric measuring principle is realized with a high-resolution conductive plastic resistance element. Since the potentiometric measuring principle delivers absolute values and requires no electronic conversion, the position feedback signal is true power on without delay, temperature stable and robust against EMC influences. Customization on the push rod (length, thread, flat) and cable terminals are available on request.

MEGATRON Elektronik SMD Resistors MSI Series Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,For low resistance values the MSI precision resistors are also with 4 - terminal connectors (Kelvin) available. As an option also a special non inductive version can be supplied. The design of the broad and bended connectors is a big advantage. It is fixing and holding the resistor on the mounting surface also if there are mechanical and thermal stresses. Typical applications are current sensing and power control

MEGATRON Elektronik S-Beam Series KM500-500N Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,KM500 force sensor are designed for OEM customers. They suit perfect for integration in complex devices. This sensors are offered without built in amplifier, but could be combined with our external amplifiers and panel meters.

MEGATRON Elektronik Potentiometric Linear Sensor Series HEM12E with Electronics Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,In advancement of the standard HEM12 series the E-Version, HEM12E, is realized for better electronic integration. The mechanical detection of linear movement is done by a magnetic drag. Due to magnetic coupling the drag pulls the wiper sled inside the tube which contains the resistive sensor element. This inside cursor construction provides wireless movement of the magnetic drag and pretends ingress of dirt or dust to the sensor element. On that way IP67 protection is reached for rough environmental conditions. For easy and space saving installation the tube contains a flange construction in fitting gauge or with thread. The flange permits also installation in hydraulic cylinders with pressures up to 250 bar (450 bar peak). To ensure high accuracy and long lifetime for a good price performance ratio the potentiometric measuring principle is realized with a high-resolution conductive plastic resistance element. For facilitating electronic integration the HEME series is equipped with an electronic signal converter board inside the flange head. Instead of delicate reference voltage a simple 24VDC±20% power supply can be used. The analog signal is provided in the typical form with 4…20mA. In comparison to the pure potentiometric transducer the E-version keeps quite well the true power on function and temperature stability and is EMC approved. The dimensions of the HEME version is only changed in the 5mm longer flange head to the standard version

IMA2 DMS amplifier is a complete signal processing unit for force or pressure transducers based on straingages. Most of commonly used output signals (0..5 V, 0..10 V, ±5 V, ±10 V, 0..20 mA, 4..20 mA) are available. The amplifier housing (Phoenix / UEGM) is designed for mounting rails. Offset and gain could be easily adjusted by trim-potentiometers at front side.