BEDIA Fuel Level Transmitter |
BEDIA Fuel Level Switch |
BEDIA Fuel Level |
BEDIA Temperature |
BEDIA Temperature Transmitter |
BEDIA Temperature Switch |
BEDIA Automotive Cable |
BEDIA Dc Dc Converter |
Bedia Level Monitoring Sensors CLS 10
BEDIA CLS 10 stands for special versions of our well-proven CLS 40 series for heavy duty applications.
321402 Water Level Sensor Type Cls-40
Connector for Water-Based Liquid
Connector Delphi Packard Metri-Pack
Connector for Oil-Based Liquids
Connector Delphi Packard Metri-Pack
Connector Delphi Packard Metri-Pack with Microencapsulated Sealing Coat
Bedia Level Monitoring Sensors CLS 20/25 for Railway
BEDIA level monitoring sensors are used to monitor the filling levels of liquids. The sensors detect when a filling level is exceeded or falls below a limit.
Connectors for Water-Based Liquids
Connector Bayonet Acc. to ISO 15170
Connector Bayonet 16 S
Connector Fine Thread M 27 x 1
Connector Packard
Connector DEUTSCH
Connector Bayonet 10 SL VG 95234
Connector Fine Thread 5/8-24 UNEF-2A VG 95342
Connector DIN EN 175 301-803-A
With Cable
With EMC Cable Connection for Shielded Lines
Connectors for Oil-Based Liquids
Connector Bayonet Acc. to ISO 15170
Connector Bayonet 16 S
Connector Fine Thread M 27 x 1
Connector Packard
Connector DEUTSCH
Connector Bayonet 10 SL VG 95234
Connector Fine Thread 5/8-24 UNEF-2A VG 95342
Connector DIN EN 175 301-803-A
With Cable
With EMC Cable Connection for Shielded Lines
Bedia Level Monitoring Sensors
CLS 40/45 for Heavy Duty Applications
BEDIA level monitoring sensors are used to monitor the filling levels of liquids. The sensors react when a filling level is exceeded or falls below a limit
Connectors for Water-Based Liquids
Connector Bayonet DIN 72585
Connector Bayonet 16 S
Connector Fine Thread M 27 x 1
Connector Packard
Connector DEUTSCH
Connector Bayonet 10 SL VG 95234
Connector Fine Thread 5/8-24 UNEF-2A VG 95342
Connector DIN EN 175 301-803-A
With Cable
With EMC Cable Connection for Shielded Lines
Connectors for Oil-Based Liquids Connector Bayonet DIN 72585
Connector Bayonet 16 S
Connector Fine Thread M 27 x 1
Connector Packard
Connector DEUTSCH
Connector Bayonet 10 SL VG 95234
Connector Fine Thread 5/8-24 UNEF-2A VG 95342
Connector DIN EN 175 301-803-A
With Cable
With EMC Cable Connection for Shielded Lines
Bedia Level Monitoring Sensors CLS 50/55 for Marine
BEDIA level monitoring sensors are used to monitor the filling levels of liquids. The sensors detect when a filling level is exceeded or falls below a limit
Connectors for Water-Based Liquids
Connector Bayonet DIN 72585
Connector Bayonet 12 SL VG 95234
Connector Fine Thread 5/8-24 UNEF-2A VG 95342
Connector DIN EN 175 301-803-A
With Cable
Connectors for Oil-Based Liquids
Connector Bayonet DIN 72585
Connector Bayonet 10 SL VG 95234
Connector Bayonet 12 SL VG 95234
Connector Fine Thread 5/8-24 UNEF-2A VG 95342
Connector DIN EN 175 301-803-A
With Cable
Bedia Intelligent Tank Sensors
Intelligent Tank Sensor ITS 60 for Diesel Fuels
BEDIA intelligent tank sensor ITS 60 is used to monitor the filling levels of Diesel fuels. The sensor is able to automatically recognize what kind of Diesel fuel (Bio-Diesel, Summer-/Winter-Diesel etc.) is present and calibrates itself to it.
The capacitative measurement principle permits measurement of levels without mechanically moving parts. This considerably increases stability and operating safety.
Connectors
5-Hole Flange – Cable with Bayonet Acc. to ISO 15170, Overmolded
5-Hole Flange – Cable with DEUTSCH DT04-4P
5-Hole Flange – Cable with Connector AMP SEAL 16, 4-Pole
5-Hole Flange – Cable with SUPERSEAL
5-Hole Flange – Cable with SUPERSEAL
-Hole Flange – Cable with Packard, Overmolded
5-Hole Flange – Cable with Connector Sure-Seal, 4-Pole
5-Hole Flange – Cable with Connector MIL-DTL-38999
G2"-Adapter Cable with Bayonet Acc. to ISO 15170, Overmolded
6-Hole Flange – Cable with Bayonet ISO 15170, Overmolded
6-Hole Flange – Cable with Flying Leads
5-Hole Flange – Connector DIN EN 175 301-803-A
5-Hole Flange – Connector M12x1
5-Hole Flange – Connector MIL-C-26482 Series 2, 4-Pole
Bedia Intelligent Tank Sensor ITS 65 for Oils
BEDIA intelligent tank sensor ITS 65 is used to monitor the filling levels of oils of any kind. The sensor is able to automatically recognize and what kind of oil (hydaulic oil, engine oil etc.) is present and calibrates itself to it.
Connectors
5-Hole Flange – Cable with Bayonet Acc. to ISO 15170, Overmolded
5-Hole Flange – Cable with DEUTSCH DT04-4P
5-Hole Flange – Cable with Connector AMP SEAL 16, 4-Pole
5-Hole Flange – Cable with SUPERSEAL
5-Hole Flange – Cable with SUPERSEAL
5-Hole Flange – Cable with Packard, Overmolded
5-Hole Flange – Cable with Connection M12x1
5-Hole Flange – Cable with Connector Sure-Seal, 4-Pole
5-Hole Flange – Cable with Connector MIL-DTL-38999
G2"-Adapter Cable with Bayonet Acc. to ISO 15170, Overmolded
6-Hole Flange – Cable with Bayonet ISO 15170, Overmolded
6-Hole Flange – Cable with Flying Leads
5-Hole Flange – Connector DIN EN 175 301-803-A
5-Hole Flange – Connector M12x1
5-Hole Flange – Connector MIL-C-26482 Series 2, 4-Pole
Bedia Temperature Switches & Sensors
Bimetal Temperature Switches
These high-power bimetal operated temperature switches are available either with normally closed (NC) or normally open (NO) contact configuration.
Bedia Electronical Temperature Sensors
This temperature sensor is for measuring the temperature of liquid and gaseous media in engines, sets of machines and utility vehicles.
A Pt 1000 thin-film precision resistor is used as the measuring element. The temperature-dependent resistance of the Pt 1000 is evaluated by an electronic circuit and outputted as a temperature-dependent voltage at the sensor‘s output. The interrelationship between temperature and voltage corresponds to the characteristic curve for the Pt 1000 and is thus nearly linear.
Bedia Screw-In Resistors
Temperature is one of the most measured physical parameters. Despite this, precise temperature measurement is one of the most difficult tasks in motor technology. To meet the constantly increasing requirements for improved motor performance, higher efficiency and reduced emissions, it is necessary to use reliable and precise sensors in modern motor control systems. Temperature has a decisive influence on process efficiency, energy consumption and other parameters. Even the service life of machines, equipment and motors is affected by temperature conditions. In many industry sectors, the most important factor is to use the information from reliable temperature measurements for control and regulation functions
Bedia DC/DC Converter for the Car & Industrial Use
The DC-voltage converters developed for the electronic components in the motor car are characterised by their ease of installation in every vehicle. The high degree of stability, the compact design, sustained short-circuit resistance as well as the high level of operating safety are the quality hallmarks of this series.
The areas of application span the mobile employment of 12-V-consumers in vehicles with a 24-V-onboard network. The devices are particularly suitable for operating car radios, stereo units, radios, cooler units, car telephones, computers, 12-V-trailer lighting etc.
The voltage converter converts an input direct voltage into an output direct voltage. The input voltage must be greater than the output voltage. No base load is required at the output end. A 26 kHz PWM switching controller is used for this purpose. Input and output are not isolated. The common earth is connected with the voltage converter housing.
All devices switch off electronically in the event of excess current or a short-circuit. Once the excess load or the short-circuit has been rectified the devices carry on working automatically. Moreover, the voltage converters also have an excess temperature protection system.
Available Versions
Typ SPW 003 24 V/12 V DC – 3 A Cable with Connector Blade Terminal
Typ SPW 005 24 V/12 V DC – 5 A Cable with Connector Blade Terminal
Typ SPW 010 24 V/12 V DC – 10 A Cable with Connector Blade Terminal
Typ SPW 015 24 V/12 V DC – 15 A Cable with Connector Blade Terminal
Typ SPW 003 24 V/12 V DC – 3 A with 2-Pole Connector Blade Terminal
Typ SPW 005 24 V/12 V DC – 5 A with 2-Pole Connector Blade Terminal
Typ SPW 010 24 V/12 V DC – 10 A with 2-Pole Connector Blade Terminal
Typ SPW 015 24 V/12 V DC – 15 A with 2-Pole Connector Blade Terminal
Typ SPW 003 24 V/12 V DC – 3 A with Connector Blade Terminal Strip
Typ SPW 005 24 V/12 V DC – 5 A with Connector Blade Terminal Strip
Typ SPW 010 24 V/12 V DC – 10 A with Connector Blade Terminal Strip
Typ SPW 015 24 V/12 V DC – 15 A with Connector Blade Terminal Strip
Typ SPW 003 24 V/12 V DC – 3 A Connector Bayonet Acc. to ISO 15170
Typ SPW 005 24 V/12 V DC – 5 A Connector Bayonet Acc. to ISO 15170
Typ SPW 008 24 V/12 V DC – 8 A Connector Bayonet Acc. to ISO 15170
Bedia Capacitive Level Sensors
BEDIA level sensors are of high quality, practically maintenance free and have a wide operating temperature range. They respond to the change of capacitance occurring when an electrode surrounded by air is immersed into the medium to be monitored. This capacitance change causes a circuit to oscillate which is processed electronically.
The different versions can be used as MIN/MAX sensors with closed circuit principle. The level sensors are factory-preset as a minimum or maximum sensor with a open circuit or closed circuit principle. The probes have a short-circuit-proof switching transistor output and are available as minus switching or plus switching.
Bedia Capacitive Level Sensor NR 260
The NR 260 is a capacitive level sensor for monitoring liquids. It is designed for use in fuel cells. The material is also suited to applications in the chemical industry for monitoring aggressive media.
Bedia Capacitive Level Sensor NR 160
The capacitive level sensor NR 160 is designed to monitor liquids and powders with high relative dielectric constant
Bedia Capacitive Level Sensor NR 150
The capacitive level sensor BEDIA NR 150 is suitable for liquids with low relative dielectric constant
Bedia Tube Sensor TLS 100
The TLS 100 tube sensor works on the capacitive measuring principle and detects the presence of a liquid in a plastic tube. These plastic tubes may also be mounted as a by-pass on a compensator in order to signal the required medium level in containers.
Türkiyede BEDIA Motorentechnik ürünleri ile ilgili uygun rekabetçi fiyatları almak için müşteri temsilcimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış mühendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.