Comadan Produktion

Comadan Production a/s is a Danish company specialized in development and production of electronic monitoring and control modules for industrial applications, known as the  products.

The modules are made in accordance with the latest quality and safety regulations and they are delivered with a 24 months warranty against any defects caused by manufactoring or component errors.

Comadan Production has a world-wide net of distributors, which are able to assist the local customers in any commercial or technical matter.

The products are divided in the following main groups:

1. Monitoring and control relays.
Modules for either direct DIN-rail mounting or 11-pole plug-in types for monitoring of Current, Voltage, Time, Temperature, Level, Frequency, Power, Supply voltage etc. All modules have a relay output for indication of monitoring status.

2. Signal converters.
Programmable or fixed modules for DIN-rail mounting for monitoring of Current, Voltage, Temperature, Frequency, Power etc. The modules are supplied with standard analogue outputs (0-20 mA, 4-20 mA or 0-10 V).

3. Power supplies.
Various DC power supplies with output current ranging from 200 mA to 20 A.

4. Miscellaneous products.
Temperature sensors, standard and custom made.
Current transformers with analogue or switch outputs.
Custom designed products.

 

Comadan Üretim a / s olarak bilinen endüstriyel uygulamalar, elektronik izleme ve kontrol modülleri geliştirme ve üretiminde uzmanlaşmış bir Danimarka şirketi C-MAC ürünleri.

modüller son kalite ve güvenlik yönetmeliklerine uygun olarak yapılmış ve onlar İmalat veya bileşen hataları nedeniyle herhangi hatalarına karşı 24 ay garanti ile teslim edilir.

Comadan Üretim herhangi bir ticari veya teknik konuda yerel müşterilere yardımcı olmak için mümkün olan distribütörler, dünya çapında net sahiptir.

ürünleri aşağıdaki ana gruba ayrılır:

1. İzleme ve kontrol röleleri.
Modüller Akım, Gerilim, Zaman, Sıcaklık, Seviye, Frekans, Güç, Besleme gerilimi vb izlenmesi için doğrudan montaj DIN-ray veya 11 kutuplu plug-in türleri ya tüm modüller bir röle çıkışı var izleme durumunu göstermek için.

2. Sinyal dönüştürücüler.
Akım, Gerilim, Sıcaklık, Frekans izlenmesi için montaj DIN-ray için Programlanabilir veya sabit modülleri, vb Güç modülleri standart analog çıkışlar (0-20 mA, 4-20 mA veya 0-10 birlikte verilir V).

3. Güç kaynakları.
200 mA 20 A arasında değişen çıkış akımı ile çeşitli DC güç kaynakları

4. Çeşitli ürünler.
Sıcaklık sensörleri, standart ve özel yapılmış. 
analog veya anahtar çıkışları ile Akım transformatörler. 
Özel tasarlanmış ürünler.

C-MAC    Signal converters

The C-mac signal converters are used to convert various kinds of non-standard electrical input signals to standard engineering units (0-20 mA, 4-20 mA or 0-10 V signals).
The input signals can be AC or DC current and voltage (up to 10 A and 1500 V), temperature sensors, proximity sensors for speed monitoring, resistors and potentiometers, 1- and 3-phase load and power monitoring, etc.
Most of the units gives a galvanic isolation between suppy, inputs and outputs, thereby ensuring a safe isolation between the process control equipment and the external environment.

 

C-MAC    Monitoring and control relays

With the various C-mac relays it is possible to monitor and control most of the signals involved in industrial and domestic control panels (current, voltage, temperature, load, speed, level, time, etc.).
All units are produced in accordance with the CE regulations with special focus on noise immunity and operation under the severe conditions, which applies to many industrial applications.

Instruments

The C-mac instruments are available in several dimensions and with many different types of input signals.
The panel instruments are produced with special focus on the demands in industrial applications, where reliabilty, noise immunity and long-term stability is a must.
The test instrument/calibrator is particularly interesting where you want to test and simulate signals in connection with transmitters and converters.

C-MAC    Power supplies

The 3 series of power supplies from C-mac cover the power range from 18 W to 480 W output, 
either switch mode or linear regulated units.

Current transformers

The C-mac current transformers series CS and SC are used to monitor high AC currents (up to 200 A).
The transformers, which are supplied with built-in electronics, are divided in 2 groups:

1. Current switches.
These units are used to give a signal, if the AC current exceeds a preselected setpoint. 
The setpoint is adjusted on a potentiometer on the transformer.
2. Current converters.
These units converts the primary AC current to a standard 4-20 mA DC output current.

C-MAC    Sensors and transmitters

Temperature sensors

Temperature transmitters

Humidity sensors

Temperature sensors in various standard and special designs, according to customers demands.

Programmable loop powered tophat transmitter for Pt100 sensor.

HS14: Sensor for monitoring of relative humidity in air.
Supply voltage 18-30 VDC.
Output: 0-20 mA, 0-5 V or 0-10 V.

HS16: loop-powered combined humidity and temperature sensor.
4-20 mA consumption proportional to 0-100% RH or 0-50°C.

 

Programmable weight transmitters

Programmable pressure transmitters

TL721 and TL722
Connection for 1-8 load cells.
Programmable ranges, output and conversion speed.
Communication option: RS485 or CAN
Supply 24 V AC/DC
With or without display

TP701 and TP702
Metering ranges 0-350 mbar or 0-10 mbar
Programmable ranges, output and conversion speed.
Communication option: RS485 or CAN
Supply 24 V AC/DC
With or without display

 

Pressure sensors

Wind speed and direction sensors

DC51 and DC66
Metering ranges up to 500 mm H2O
Loop-powered 4-20 mA
EX approved (DC66)

DWC-INA and DWC-VXV
Brass housing, suitable for offshore
Supertight, patented design
Contact-free monitoring

 

 

Comadan Produktion markasına ait tüm ürünler

    0 kayıt bulundu

      ALFABETİK MARKA LİSTESİ

      Sertifikalarımız

      Oruçreis Mah. Tekstilkent Tic. Mrk.
      G2 Blok, No:101 (10AD-Z77)
      34235 Esenler / ISTANBUL
      T: +90 212 235 95 35 / 36
      F: +90 212 235 95 37

      info@imajteknik.com

      E-Bülten Listemize üye olun !

      Gelişmelerden haberdan olmak ve ileride gerçekleştirilecek yeniliklerimizden haberdan olabilmek için e-posta adresinizi bizimle paylaşın!