CAMCO (Ferguson) is the industry leader in cam-operated rotary index drives and tables. Additionally, CAMCO manufactures precision link conveyors, heavy duty part handlers, and custom cam products
CAMCO
DX Series Rotary Servo Actuator
The DX Series Drive is a programmable direct drive rotary servo actuator with Safe Torque Off (STO) designed for small flexible dial applications.
Key Features
- 10 different sizes with maximum torque capacity from 6 Nm to 500 Nm
- Easy setup and installation
- High accuracy and repeatability
- Quick response to reduce tact time
- Cam-profile motions provide smooth acceleration and deceleration
- Permanent lubrication for zero maintenance
- Energy saving: power is consumed only during indexing
- Separate actuator and control power supply
- Semi-automatic tuning function
- Operator Teaching Pendant
- Dynamic load FFT analyzer
- Accuracy: ±30 / Repeatiblity: ±5
CAMCO
CAMCO
GTB Series Servo Positioner / Rotary Index Table
CAMCO GTB rotary tables are the lightest, most compact, high-accuracy servo positioners available. The exceptional low profile high-torque output design supports the demands of typical high load inertia applications.
The GTB is 34% lower in height and 64% lower in weight when compared to competitive models, while being able to deliver 1.4 times more torque.
CAMCO
RSD Series Rotary Servo Drive
Key Features
-
Zero Backlash
-
Universal mounting
-
Maintenance-free operation
-
Large output bearing for greater overturning moment capacity
-
Large thru-hole for accessory lines (electric, pneumatic, etc.)
-
IP-65 rating
-
Class 100 rated with Med-Redi preparation
The CAMCO RSD Rotary Servo Drive is a zero-backlash, cam-actuated drive compatible with industry-standard servo motors for precise control, efficiency and flexibility.
CAMCO RSD rotary servo drive is a zero-backlash, cam-actuated drive that can be used with both rotary and linear systems for accurate, smooth motions even at high speeds or with rapid speed changes. The new drive is compatible with a variety of servo motors, offering the flexibility and logic to handle applications that involve uneven motion or displacement, change in direction or different products running on the same machine. A large output mounting surface enables the RSD to support dials and high loads. Its thru hole can accommodate accessory lines such as electrical wiring and air or hydraulic lines.
CAMCO
RDM Series Roller Dial Index Drives
Key Features
-
Low Profile
-
Large center thru hole
-
Large output mounting surface supported by 4-point contact bearing offering superior thrust and moment capacity
-
Complete, motorized drive packages and option overload clutch
Model Series
-
80RDM
-
601RDM
-
902RDM
-
1100RDM
-
1305RDM
-
1800RDM
CAMCO
RGD Roller Gear Index Drives
RGD Roller Gear Index Drives are robust, versatile units suitable for a wide variety of applications.
Key Features
-
Universal mounting with mounting holes on all six sides
-
Flange output (RGS shaft output available)
-
Center thru hole
-
Available with custom motions such as oscillating motions or short index periods
Model Series
-
40RGD
-
50RGD
-
70RGD
-
80RGD
-
110RGD
-
140RGD
-
350RGD
-
500RGD
-
600RGD
Applications
The Roller Gear series is ideal for most assembly and packaging machine applications including indexing or oscillating motions. Other applications include: rotary dials, conveyors, press-feeds, lift-and-carry mechanisms and inserters. They can also be used for linear motions using crank or oscillating arm attachments
CAMCO
RNG Series Ring Index Drives
Key Features
-
Available in four sizes: .75 to 2.0 meter diameters
-
Dial Ring can be removed for machining to mounting your tooling and fixtures.
-
Large center through-hole to accommodate auxiliary equipment
-
60 station capability, ideal for multiple part automatic assembly machines
-
Steel Dial Ring or optional Aluminum Ring
-
Broad range of motions and drive packages
Model Series
-
750RNG
-
1100RNG
-
1550RNG
-
2000RNG
Ring Index Drives have a large thru hole ideal for mounting auxiliary equipment within the hole, freeing floor space and providing operator access. The Ring Drive is ideally suited for pad printing and decorating equipment and for automatic assembly machines.
CAMCO
RGS Series Roller Gear Index Drives
RGS Roller Gear Index Drives are robust, versatile units suitable for a wide variety of applications.
Key Features
-
Universal mounting with mounting holes on all six sides
-
Shaft output (RGD flange output available)
-
Available with custom motions such as oscillating motions or short index periods
Model Series
-
40RGS
-
50RGS
-
70RGS
-
80RGS
-
110RGS
-
140RGS
-
350RGS
-
500RGS
-
600RGS
CAMCO
Series P Parallel Index Drives
Parallel Index Drives are ideal for high-speed applications or for actuation-type applications such as driving a linkage or a conveyor.
Key Features
-
High Speed Capability (with non-reversing cam followers)
-
High Load Capability (with oversized cam followers)
-
Shock Resistant (more robust)
-
Motion Flexibility (oscilling and complete motions) due to conjugate cam geometry
-
1 - 8 stop range and oscillating motions
Model Series
Parallel Indexers use a pair of conjugate plate cams with yoke-mounted followers parallel to the axis of the output. The input and output shafts are parallel, in a configuration that means there are no ribs on the cam and no reversal of the cam followers. Rates of more than 1,000 indexes per minute are possible with parallel indexers.
CAMCO
RA Series Right Angle Index Drives
Right Angle Index drives are ideal for actuation type applications such as driving a linkage or in-line conveyor.
Key Features
-
Fixed center distance between input and output
-
Compact design requires minimum floor space
-
Universal mounting including horizontal output
Model Series
CAMCO
E-Series Heavy Duty Index Drives
Key Features
-
Large output mounting surface supported by a 4-point contact bearing superior thrust and moment capacity
-
Large center thru hole to accommodate stationary center post, electrical wiring and air or hydraulic lines
-
Complete motorized drive package with reducer and brake-motor combinations to suit most applications
-
Precision cam with preloaded cam followers for maximum accuracy
-
Durable welded steel housing
-
Preloaded “center rib” design for smooth acceleration and deceleration with precision positioning
Model Series
-
750E
-
950E
-
1150E
-
1550E
-
2050E
The E-Series Index Drive is ideal for heavy-duty rotary dial applications. Their compact, low-profile design reduces floor space requirements while providing a large output mounting surface. E-Series Index DriveCapable of supporting static loads in excess of 500,000 lbs, E-Series Index Drives are ideal for dial plate applications of up to 50 feet (15 m) in diameter. They can also be used to drive large conveyor systems
CAMCO
RD Series Roller Dial Index Drives
Roller Dial Index Drives offer superior load capabilities making them ideal for medium to high torque applications.
Key Features
-
Universal mounting including horizontal mounting ideal for trunion applications.
-
Center thru hole facilitates passage of electrical wiring, pneumatic lines or mechanical linkages
-
Short camshaft motion periods are well-suited to continuous running applications or for special motion requirements.
-
Available with custom motions such as oscillating motions
Model Series
-
425RD
-
800RD
-
1301RD
-
1801RD
RD index drives have a robust design ideal for continuous-running applications or applications requiring complex motions. The RD index drives have universal mounting capabilities with a center thru hole for application flexibility.
CAMCO
MDE Series Mechanical and Servo-Based Indexers
Key Features
-
Industry leading torque rating - 8400 Nm to 16500 Nm
-
High capacity dynamic payload - 3200 kg to 6800 kg
-
Mounting options - vertical or horizontal
-
Quick access field replaceable cam followers
Model Series
The MDE Indexer is a high performance indexer with an industry leading torque rating. These cost effective indexers have the highest dynamic payload capacity while still maintaining a fast indexing speed, flexible mounting options and easily replaceable cam followers.
CAMCO
HDE Series Programmable and Fixed Station Indexers
Key Features
-
5-year maintenance-free operation
-
HDE1200M has easy system integration with SEW® and NORD® drive solutions
-
HDE1200S integrates with a broad selection of servo motors
-
Quick-stop safe operation with industry leading E-stops times
-
Precision positioning with zero backlash
-
Space savings with large center opening to route fixtures and utilities
-
Flexible mounting base structure can be customized to meet application space requirements
-
Global technical support for indexer sizing and servicing
Model Series
The new CAMCO HDE Series indexers deliver 5-year maintenance-free operation with industry leading torque ratings to support large dynamic payloads. The HDE1200S is a freely-programmable servo-based indexer while the HDE1200M is a mechanical indexer uses an AC induction motor drive package. The open base mounting frame can be scaled in both width and height to fit existing and new assembly line requirements. These indexers are ideal for continuous operation in automotive and packaging applications.
CAMCO
Torq/Gard Power Transmission Overload Clutches
Key Features
-
Modular design fits direct or chain drives, plus other options
-
Universal mounting
-
Seven sizes, trip torque capacity range from 13 in-lb to 8,000 in-lb
-
Single position, automatic reset
CAMCO Torq/Gard power transmission overload clutches instantly react when torque exceeds preset limits, protecting your machinery's drive train from damage and costly downtime. Its modular design accommodates direct drive, chain drive or other power transmission options and universal mounting eliminates the need for special bore requirements.
CAMCO
Precision Link Conveyors
Heavy Duty Precision Link Conveyors are available in over/under and carousel configurations. Both configurations include heavy duty legs and a precision machined base, all heavily ribbed to hold large loads and maintain system accuracy.
Key Features
-
Available in Link pitch of 6, 9, and 12 inches
-
High speed station-to-station parts transfer
-
Precision positioning of parts for assembly or manufacturing processes
-
Optional Bases, Line Shafts and Tooling Mounting Plates
Model Series
-
6.0 Inch Heavy Duty
-
9.0 Inch Heavy Duty
-
12.0 Inch Heavy Duty
CAMCO
Modular Table Top Precision Link Conveyors
Camco Modular Conveyors offer precision positioning with a modular design.
Key Features
-
Modular frame in fixed increments for quick assembly and delivery
-
High-speed, high-load parts transfer
-
Open frame design for pass-through of belting, cables and other components
Model Sizes
-
3.0 Inch
-
4.5 Inch
-
6.0 Inch
DRIVES & MOTORS
Servo MotorsRotary Indexers
CAMCO | Drives & Motors | Rotary Indexers
Rotary motion equipment and products assist with device indexing. Indexing is the starting and stopping of a device in precise intervals at precise locations. CAMCO cam-operated rotary indexers move a wide variety of products and components with precision
CAMCO
RDM Series Roller Dial Index Drives
Key Features
-
Low Profile
-
Large center thru hole
-
Large output mounting surface supported by 4-point contact bearing offering superior thrust and moment capacity
-
Complete, motorized drive packages and option overload clutch
Model Series
-
80RDM
-
601RDM
-
902RDM
-
1100RDM
-
1305RDM
-
1800RDM
CAMCO
RNG Series Ring Index Drives
Key Features
-
Available in four sizes: .75 to 2.0 meter diameters
-
Dial Ring can be removed for machining to mounting your tooling and fixtures.
-
Large center through-hole to accommodate auxiliary equipment
-
60 station capability, ideal for multiple part automatic assembly machines
-
Steel Dial Ring or optional Aluminum Ring
-
Broad range of motions and drive packages
Model Series
-
750RNG
-
1100RNG
-
1550RNG
-
2000RNG
Ring Index Drives have a large thru hole ideal for mounting auxiliary equipment within the hole, freeing floor space and providing operator access. The Ring Drive is ideally suited for pad printing and decorating equipment and for automatic assembly machines.
CAMCO
Precision Link Conveyors
Heavy Duty Precision Link Conveyors are available in over/under and carousel configurations. Both configurations include heavy duty legs and a precision machined base, all heavily ribbed to hold large loads and maintain system accuracy.
Key Features
-
Available in Link pitch of 6, 9, and 12 inches
-
High speed station-to-station parts transfer
-
Precision positioning of parts for assembly or manufacturing processes
-
Optional Bases, Line Shafts and Tooling Mounting Plates
Model Series
-
6.0 Inch Heavy Duty
-
9.0 Inch Heavy Duty
-
12.0 Inch Heavy Duty
CAMCO
iQue Modular Conveyor with iTRAK
Key Features
-
Flexible
-
Programmable
-
Increased production rates – 50% or more
-
Faster changeover with on-the-fly programming
-
Reduced machine footprint
-
Increased line speed and flexibility
-
Reduced periodic maintenance
-
A-B Encompass Partner
-
Straight & 90° curve linear motor sections available in standard 400mm lengths
-
Available in 50mm, 100mm & 150mm coil size
-
Combine for racetrack, square or circle configurations for any length
CAMCO
Series P Parallel Index Drives
Parallel Index Drives are ideal for high-speed applications or for actuation-type applications such as driving a linkage or a conveyor.
Key Features
-
High Speed Capability (with non-reversing cam followers)
-
High Load Capability (with oversized cam followers)
-
Shock Resistant (more robust)
-
Motion Flexibility (oscilling and complete motions) due to conjugate cam geometry
-
1 - 8 stop range and oscillating motions
Model Series
CAMCO
LPP Series Linear Parts Handler
Key Features
-
HD-LPP Heavy Duty Linear Parts Handlers (Page I-15) offer smooth, controlled motions and high load capacities.
-
MR-LPP Mid-Range Linear Parts Handlers (Page I-27) have side input shafts ideal for line shaft driven applications.
HD-LPP Heavy Duty Linear Parts Handlers
-
High-speed capabilities – up to 60 cycles per minute
-
Hardened and ground roller gear cams driving both axes.
-
Fully preloaded roller gear cam and follower wheel design eliminates backlash and ensures smooth movement.
-
Camshaft bearings are preloaded taper roller bearings.
-
Compact design – small footprint
-
Long-life grease lubrication
CAMCO
RPP Series Cambot® Rotary Parts Handler
Key Features
-
Rugged and precise cam operated mechanisms engineered for a minimum of 8000 hours of maintenance-free life.
-
Hardened and ground cams drive both the lift and rotary axes.
-
Preloaded precision cam followers eliminate backlash and ensure smooth movement.
-
Preloaded taper roller bearings on the camshaft (Input Shaft).
-
Four-point contact preloaded roller bearing on the rotary axis.
-
All bearings are lubricated by an oil bath.
-
One-piece lift arm.
-
Ball bushings (recirculating-ball type) support the main lift shaft and turn the large output surface and ride on hardened shafts for stability and stiffness.
-
Manufactured in a fully integrated application, design, manufacturing and inspection environment.
Model Series
CAMCO
Custom Cams
CAMCO Custom Cams serve as an economical alternative to "in house" cam design, engineering and manufacturing. Backed by over 60 years of experience, we offer a comprehensive range of configurations, materials, tolerances and materials.
Custom Cams are available in a variety of styles:
|
Plate Cams
Popular, economical design used in low speed applications.
|
|
Globoidal Cams
Complex, tapered rib globoidal cams, commonly known as roller gear cams, are the heart of IMC's indexers. Controlled follower preloads increase follower life, speeds and accuracy for the ultimate solution in motion control.
|
|
Face-Grooved Cams
Medium speed cams utilizing a groove slightly larger than the follower diameter providing minimal running clearance and reduced backlash.
|
|
Conjugate Cams
Dual cams controlling preloaded followers which provide higher speed capabilities and better accuracy.
|
|
Barrel Cams
Cylindrical cams which can be provided as an end cam, grooved type with minimal follower clearance or as a ribbed type utilizing preloaded followers for increased life and accuracy.
|