|
|
Multizone MicroFUSION
|
Single phase
|
Phase angle, Zero cross, Zero Cross Transformer Mode
|
AC
|
8 - 80 Amps
|
MicroFUSION is an ultra-compact high-performance microprocessor-based power controller, available in single or three phase models to control AC loads.
|
|
|
MicroFUSION Three Phase
|
Three phase
|
Phase angle, Zero cross, Zero Cross Transformer Mode
|
AC
|
8 - 400 Amps
|
MicroFUSION is an ultra-compact high performance digital SCR controller that adapts to the analog environment as well as the digital environment.
|
|
|
MicroFUSION Single Phase
|
Single phase
|
Phase angle, Zero cross, Zero Cross Transformer Mode
|
AC
|
8 - 400 Amps
|
MicroFUSION is an ultra-compact high performance digital SCR controller that adapts to the analog environment as well as the digital environment.
|
|
|
FUSION Three Phase (DC) Power Controller
|
Three phase
|
Phase angle
|
DC
|
60 - 1400 Amps
|
24 - 600 Vac. A microprocessor-based DC SCR controller operating both analog and digital interfaces. A phase angle-fired controller which linearly controls, with respect to the setpoint, the DC voltage, current, or true power applied to an electrical load. Control is achieved by means of a six SCR bridge with freewheeling diode.
|
|
|
FUSION Three Phase (AC) Power Controller
|
Three phase
|
Phase angle, Zero cross, Burst
|
AC
|
50 - 1200 Amps
|
24 - 600 Vac. A microprocessor-based SCR controller operating both analog and digital interfaces. A phase angle or zero cross fired SCR controller which linearly controls, with respect to the setpoint, the AC voltage, current, or true power applied to a three phase electrical load. The 3 phase controller can be ordered in either 2 or 3 leg control with 2 leg being limited to zero cross firing. Control is achieved for 3 leg by three pairs of inverse parallel SCRs or in 2 leg by 2 pairs of inverse parallel SCRs.
|
|
|
FUSION Single Phase (DC) Power Controller
|
Single phase
|
Phase angle
|
DC
|
45 - 1080 Amps
|
24 - 600 Vac. A microprocessor-based DC SCR controller operating both analog and digital interfaces. A phase angle fired controller which linearly controls, with respect to the setpoint, the DC voltage, current, or true power applied to an electrical load. Control is achieved by means of a half controlled SCR bridge.
|
|
|
FUSION Single Phase (AC) Power Controller
|
Single phase
|
Phase angle, Zero cross, Burst
|
AC
|
50 - 1200 Amps
|
24 - 600 Vac. A microprocessor-based SCR controller operating both analog and digital interfaces. A phase angle or zero cross fired controller which linearly controls, with respect to the setpoint, the AC voltage, current, or true power applied to an electrical load. Control is achieved by means of a pair of inverse parallel SCRs.
|
|
|
Compact FUSION Three Phase Power Controller
|
Three phase
|
Phase angle, Zero cross, Burst
|
AC
|
10 - 160 Amps
|
24 - 600 Vac. A microprocessor-based SCR controller operating both analog and digital interfaces. Can be ordered in either 2 or 3 leg control with 2 leg being limited to zero cross firing. Output is controlled linearly with respect to command signal and can be set to the average or RMS value of the voltage or current, as well as true instantaneous power or external feedback.
|
|
|
Compact FUSION - Single Phase Power Controller
|
Single phase
|
Phase angle, Zero cross, Burst
|
AC
|
10 - 160 Amps
|
24 - 600 Vac. A microprocessor-based SCR controller, operating with both analog and digital interfaces. Output is controlled linearly with respect to command signal and can be set to the average or RMS value of the voltage or current, as well as true instantaneous power or external feedback.
|
|
|
3869 Three Phase DC Power Controller
|
Three phase
|
Phase angle
|
DC
|
300 - 400 Amps
|
120 - 480 Vac. DC SCR Controller. Accepts most commands. High current, three phase DC output.
|
|
|
3629C Three Phase Power Controller
|
Three phase
|
Phase angle
|
AC
|
50 - 1000 Amps
|
208 - 575 Vac. Three Phase SCR Controller. Higher current ratings than our solid state relay models. Features include: current limiting, over-current trip, shorted SCR detection.
|
|
|
3337 Three Phase Zero Cross Power Controller
|
Three phase
|
Zero cross
|
AC
|
200 - 750 Amps
|
208 - 575 Vac. Three Phase, Zero Cross SCR Controller. Accepts most commands. Features include: Sync-guard, Trans-guard, shorted SCR detection and on-board line fusing for most frame sizes.
|
|
|
3037 Three Phase Zero Cross Power Controller
|
Three phase
|
Zero cross
|
AC
|
85 - 750 Amps
|
208 - 575 Vac. Analog SCR Controller. Accepts most commands. Features include: Sync-guard, Trans-guard, Shorted SCR detection and on-board line fusing for most frame sizes.
|
|
|
3027 Three Phase Power Controller
|
Three phase
|
Zero cross
|
AC
|
85 - 750 Amps
|
208 - 575 Vac. Analog SCR Controller. Accepts most commands. Features include: Sync-guard, Trans-guard and on-board line fusing for most frame sizes.
|
|
|
3021B Three Phase Power Controller
|
Three phase
|
Zero cross
|
AC
|
10 - 70 Amps
|
120 - 575 Vac. Analog SCR Controller. Accepts most commands. Sync-guard smoothes out line current draw when multiple controllers are in use.
|
|
|
3021A Three Phase Power Controller
|
Three phase
|
Zero cross
|
AC
|
10 - 70 Amps
|
120 - 575 Vac. Analog SCR Controllers. Accepts most commands.
|
|
|
3020 Three Phase Power Controller
|
Three phase
|
Zero cross
|
AC
|
10 - 70 Amps
|
120 - 575 Vac. Analog SCR Controller. Powered off of the 4/20mA loop, so no control transformer is required.
|
|
|
2022 AC Single Phase Power Controller
|
Single phase
|
Phase angle
|
AC
|
10 - 70 Amps
|
120 - 575 Vac. Analog SCR Controller. Accepts most commands. Dual setpoints for fast transitions.
|
|
|
1825 DC Power Controller
|
Single phase
|
Phase angle
|
DC
|
10 - 30 Amps
|
120 - 240 Vac. Analog SCR Controller. Accepts mA commands. 120Hz fullwave DC output.
|
|
|
1822 DC Power Controller
|
Single phase
|
Phase angle
|
DC
|
10 - 30 Amps
|
120 - 240 Vac. Analog SCR Controller. Accepts Vdc or potentiometer commands. 120Hz fullwave DC output.
|