CEDAR SUGISAKI METER

CEDAR SUGISAKI METER

CEDAR SUGISAKI METER Torque tester

WDIS series


To manage various torque tools

WDIS-IP（05/5/50/200/500）、WDIS-RL（005/05/6/10）、WDIS-IPS（05C/5C/20C）

The DIS series is easier to use and has higher performance.
In conjunction with a PC or PLC, it manages torque measurement at a higher level.
Manual torque driver and wrench management, Automatic semi-automatic tool management, Inspection of screw tightening and relaxation torque.

  • Color display that can display various information

  • Data output is equipped with both USB and RS232C

  • Series lineup of various liners up to 50 mN · m ( 0.05 N · m) to 500 N · m

  • Up to 10 channels can be set for numerical values such as pass / fail conditions

  • Pass / fail judgment is informed in color display

  • Operates from AC adapter or with 4 AA batteries

  • The lineup of the WDIS series is WDIS-IP05, WDIS-IP5, WDIS-IP50, WDIS-IP200, WDIS-IP500, WDIS-RL005, WDIS-RL05, WDIS-RL6, WDIS-RL10, WDIS-IPS05C, WDIS-IPS5C, WDIS-IPS20C

 

CEDAR SUGISAKI METER
Torque Tester CD-100M/10M

  • CD-100M/10M
Suitable for daily inspection of electric screw driver
Using convensional joint (SJ joint (PAT))
Enable to save 5 channels of pass/fail judgement criterion, and enable to change settings by switch channels even if the tightening term changes.
High durability against high torque loaded unexpectedly. (triple the durability of conventional model).
Also, the attached adapter does not disassemble the joint due to excessive rewinding.It can be used and managed in a conventional way.
 
  • Show "Measurement mode", "Measurement unit","maximum, minimum, average"
  • Switchable measurement unit
  • Enable to save 5 sets of settings such as upper limit and lower limit
  • 800 items of memory data
  • Real-time output About every 1/180 seconds
  • Data acquisition software can be downloaded for free

 

CEDAR SUGISAKI METER
Torque Tester DI-9M-8/08

Suitable for daily inspection of electric screw driver

Using "OW joint" (joint which is unnecessary to rewind)

Enable to save 5 channels of pass/fail judgement criterion, and enable to change settings by switch channels even if the tightening term changes.
Due to "OW Joint", able to mesures effectively without rewinding.​

  • Show "Measurement mode", "Measurement unit", and "maximum, minimum, average"

  • Switchable measurement unit

  • 800 items of Memory data

  • Real-time output About every 1/180 seconds

  • Data acquisition software can be downloaded for free

  • Include "Screw Cube"-measuring jig for manual tools

 
 
CEDAR SUGISAKI METER
Torque Tester NDI-800CN/80CN

 

Suitable for daily inspection of electric screw driver

Progress of Visibility, Usability and Connectability

Visible display due to colorization & tilt function Easier operation with dedicated software enables more sophisticated management.
Due to ""OW Joint"", able to mesures effectively without rewinding.

  • Easy set-up of tester on PC

  • Easy search of memory data

  • Enable to be powered directly by AC adapter

  • Enable to check pass/fail threshold value during measurement

  • Color display depending on measurement value

  • Software can be downloaded for free

  • Include "Screw Cube"-measuring jig for manual tools

 

CEDAR SUGISAKI METER
Torque Tester DI-11

Suitable for daily inspection of electric screw driver

Correpond to high torque electric driver

Enable to save 5 channels of pass/fail judgement criterion, and enable to change settings easily by switch channels even if the tightening term changes.
Include High torque correspondence joint (SJ - 100)

 

  • Show "Measurement mode" "Measurement unit" Indication of "maximum, minimum, average"
  • Switchable measurement unit
  • Enable to save 5 sets of settings such as upper limit and lower limit
  • 800 items of memory data
  • Real-time output About every 1/180 seconds
  • Data acquisition software can be downloaded for free

 

CEDAR SUGISAKI METER
Torque Tester DIS-IP series (-IP05/5/50/200/500)

Suitable for managing various manual torque wrench & torque drivers
Standard model for static torque measurement
Bigger characters size and enhance user convenience.
Enable to be installed in a small space due to a separate type.
Enable to save 5 channels of pass/fail judgement criterion, and enable to change settings easily by switch channels even if the tightening term changes.
 
  • Show "Measurement mode" "Measurement unit" Indication of "maximum, minimum, average"
  • Switchable measurement unit
  • Enable to save 5 sets of settings such as upper limit and lower limit
  • 800 items of memory data
  • Real-time output About every 1/180 seconds
  • Data acquisition software can be downloaded for free
  • The lineup of the DIS-IP series is DIS-IP05, DIS-IP5, DIS-IP50, DIS-IP200, DIS-IP500

 

CEDAR SUGISAKI METER
Torque Tester DWT-200

Suitable for daily inspection of torque wrench on site
Dedicated for managing Torque wrench
Enable to check the operating torque by easy operation.
Visible display due to LED light.
Include only necessary functions to keep the lowest cost.​
  • Equipped with "PP" mode for measuring actual torque and "PD" mode for measuring the torque that the torque wrench operates
  • Attached adapter for converting detection unit to □ 9.5

 

CEDAR SUGISAKI METER
Torque Tester DIS-IPS series (20C/5C)

For managing various torque wrenches & torque drivers, and automatic / semiautomatic machines
 
The detection section is very compact and suitable for automatic line measurement.
Enable to save 5 channels of pass/fail judgement criterion, and enable to change settings easily by switch channels even if the tightening term changes.
Due to "OW Joint", able to mesures effectively without rewinding.
 
  • Show "Measurement mode" "Measurement unit" Indication of "maximum, minimum, average"
  • Switchable measurement unit
  • Enable to save 5 sets of settings such as upper limit and lower limit
  • 800 items of memory data
  • Real-time output About every 1/180 seconds
  • Include "Screw Cube" or "Fixed-type Attachment" for measuring static tightening tool
  • Data acquisition software can be downloaded for free
  • The lineup of the DIS-IPS series is DIS-IPS5C, DIS-IPS20C

 

CEDAR SUGISAKI METER
Torque Tester DI-1M-IP series (50/200/500)

Suitable for Impact-based tool management
 
High accuracy, and portable. It is installed on the work line and is effective for periodic inspection of the tool.
The blow counter displays number of blows and value of torque, and LED display which is brighter and easier to read.
Besides, it can be used for the management of the torque wrench · angle nut runner.
 
  • Blow counter shows number of blows and value of torque
  • Enable to inspect operating torque of manual preset type torque wrench etc. in peak down mode
  • Auto power-off function · Autoclear function are installed
  • Data acquisition software can be downloaded for free
  • The lineup of the DI-1M-IP series is DI-1M-IP50, DI-1M-IP200, DI-1M-IP500

 

CEDAR SUGISAKI METER
Torque Tester DI-4B-25

Suitable for daily inspection of small-size impact tools
 
Since display is equipped as with LED, you can clearly read the value even in a dark place.
Enable to measure anywhere because it is integrated type and compact.
  • Measurable up to 25 N · m
  • Equipped with blow counter for impact tool
  • Enable to measure with socket attached
  • Attached Soft joint (for tightening elastic material) and hard joint (for tightening rigid material)
  • Data acquisition software can be downloaded for free

 

CEDAR SUGISAKI METER
Torque Tester DIS-RL series (005/05/2/6)

  • DIS-RL series (005/05/2/6)
For tightening and final check of screws & bolts
 
Separate type digital torque driver wrench. The detection part is very compact and suitable for measuring lower torque & torque in a narrow place.
Enable to save 5 channels of pass/fail judgement criterion, and enable to change settings easily by switch channels even if the tightening term changes.
  • Show "Measurement mode" "Measurement unit" Indication of "maximum, minimum, average"
  • Switchable measurement unit
  • Enable to save 5 sets of settings such as upper limit and lower limit
  • 800 items of memory data
  • Real-time output About every 1/180 seconds
  • Data acquisition software can be downloaded for free
  • The lineup of the DIS-RL series is DIS-RL005, DIS-RL05, DIS-RL2, DIS-RL6

 

CEDAR SUGISAKI METER Digital torque driver

Digital adjustable Torque driver NDID-150CN

  • NDID-150CN
For tightening and final check of screws & bolts
Idling type Digital Torque Driver
Idling type Torque Driver which enable to count Qty of Torque and tightened number by tightening with clicking noise.
When the torque is reached certain value, the clutch is automatically disengaged and idling, so there is no worry of over tightening.
 
  • Enable to adjust Drag torque
  • Manage tightening torque and Qty of tightened torque
  • Record data of peak torque and torque fluctuation
  • Save and transfer data to USB memory
  • A smart and functional form
  • Attached USB Memory
  • Outline　34×34×206㎜（Grip part Φ30）

 

CEDAR SUGISAKI METER
Digital Torque Driver DID-4

For tightening and final check of screws & bolts
 
Lightweight and compact with integrated display !
Cordless type and improves operability. Enable to stably measure for long continuous use.
Screw tightening counter function is also installed as standard.
Enable to save 5 channels of pass/fail judgement criterion, and enable to change settings easily by switch channels even if the tightening term changes.
 
  • Lightweight and compact with integrated display
  • 800 items of Memory data
  • USB shape of Data output
  • Settable upper limit and lower limit torque
  • Notify the set value with buzzer & LED lamp
  • Built-in tightening counter
  • Rechargeable battery drive
  • Auto power off for safe operation
  • Real time data output
  • Cordless type

 

CEDAR SUGISAKI METER
Digital Torque Driver DID-05

For tightening and final check of screws & bolts

Lightweight and compact with integrated display !
For checking torque of the small screw of M0.8 ~ M2.0. Checking the starting torque of the rotating body such as volume & hinge.
In order to reduce the influence of the pressing force, the weight of the main unit was minimized to about 180.
Screw tightening counter function is also standard installed.
Enable to save 5 channels of pass/fail judgement criterion, and enable to change settings easily by switch channels even if the tightening term changes.

 

  • Lightweight and compact with integrated display

  • 800 items of Memory data

  • USB shape of Data output

  • Settable upper limit and lower limit torque

  • Notify the set value with buzzer & LED lamp

  • Built-in tightening counter

  • Rechargeable battery drive

  • Auto power off safe operation

  • Real time data output

  • Cordless type

  • Roller clutch has adopted and able to fast-forward in a right direction (screw tightening)

 

CEDAR SUGISAKI METER Digital torque wrench

Digital torque wrench DIW series (120/75/20/15)

For tightening and final check of screws & bolts

The wrench head part can rotate about 300 degrees! The eyes and the display board can be always parallel and improves operability.
Lightweight and compact with integrated display !
Cordless type and improves operability. Enable to stably measure for long continuous use.Screw tightening counter function is also installed as standard.
Enable to save 5 channels of pass/fail judgement criterion, and enable to change settings easily by switch channels even if the tightening term changes.

  • The wrench head part can rotate about 300 degrees

  • Lightweight and compact with integrated display

  • 800 items of Memory data

  • USB shape of Data output

  • Settable upper limit and lower limit torque

  • Notify the set value with buzzer & LED lamp

  • Built-in tightening counter

  • Rechargeable battery drive

  • Auto power off safe operation

  • Real time data output

  • The lineup of the DIW series is DIW-15, DIW-20, DIW-75, DIW-120

 

CEDAR SUGISAKI METER Screw counter

Screw counter ECT series (02H/03/04)

Mistake-proofing of screw tightening work

Easy connection! It corresponds to various electric drivers equipped with screw tightening completion signal.
Mmanage the number of screw tightening, and prevent workers' poor mistake.
*There is an electric driver/tool that can not be applied for. Also, it may be necessary to change some settings in case of use. Please contact us for details.
Enable to check Qty by sound and light, and to perform more accurately and efficiently due to various function such as counting only action fastening screw successfully with the timer function.

  • 【02H/03/04】Count the signals from electric driver

  • 【02H/03/04】Easy to check with sound and light

  • 【02H/03/04】Check malfunction with timer function

  • 【02H/03/04】Equipped count cancel function

  • 【03/04】Advanced management by work sensor function

  • 【03/04】Connectable to other equipment with tightening completion signal

  • 【03/04】Work chattering prevention & work set timer function installed

  • 【04】Equipped counting function of pick-up sensor

  • The lineup of the ECT series is ECT-02H, ECT-03, ECT-04

 

CEDAR SUGISAKI METER Slip torque tester

Slip torque tester DI-12 series (SL4/SL02/SL15)

For measurement of torque of tightened screw
 
Measure how much force the screw is tightened.
Enable to measure the torquevalue of tightened screw by grasping the occurrence of slippage accurately and measuring the torque.
For sampling inspection and setting&managing Output Torque of power driver.
  • Smooth tightening work with motor drive
  • Unnecessary to be tighten again by automatic stop function after determination
  • Measure torque value of tightened screw
  • Create torque curve (measurement of break torque, limit torque, yield point torque, etc.)
  • The lineup of the DI-12 series is DI-12-SL02, DI-12-SL4, DI-12-SL15

 

CEDAR SUGISAKI METER Rotate torque tester

Rotate torque tester NTS-6 series (S1/S2/S5/S10/S20)

Measurement of rotation starting torque and rotating load torque
 
Measure rotational torque of finished parts during assembly of equipment with rotating function.
As the output shaft self-rotates, catch load fluctuation of the rotating body by built-in sensor.
It can be measured rotational start torque of the rotated body (not rotating itself, no power) and load torque during rotation.
(Printer, copy machine, zooming lens, door knob mechanism, hinge mechanism etc ...)
 
  • Three types of measurement mode
  • Enable to set upper & lower limit and pass/fail judgment by lamp
  • Adapted to various torque ranges with 5 types
  • OK · NG output
  • USB shape of Data output
  • External start signal input
  • Easy creation of torque waveform with real time output
  • The lineup of the NTS-6 series is NTS-6/S-1, NTS-6/S-2, NTS-6/S-5, NTS-6/S-10, NTS-6/S-20

 

CEDAR SUGISAKI METER Accessories

One Way Joint OW series (025/10/20/60)

Measuring joint of electric screwdriver

Special structure that does not require rewinding

Improve workability by unique structure, and complete measuremtn by only operation in the tightening direction.
Enable to be performed long-time stable Torque manage due to the structure which is not necessary to consider the influence of friction.

  • Enable to measure with bit set

  • Efficient torque check in tightening direction

  • Reaction force absorbing structure

  • Enable to measyre Low-range torque

 

CEDAR SUGISAKI METER
Measuring joint SJ series (10/10K/50)

Measuring joint of electric screwdriver

Conventional type coil spring compression method

No decomposition of joint due to excessive return with unique structure!
The SJ Joint is a conventional coil spring compression method and can be used same as conventional management method.

  • Enable to mount bits can be installed according to the driver's model

  • By installing hexagonal stat, enable to measure as the bit is attached
    ※For details of the attached bit shape, please contact us

 

Türkiyede CEDAR SUGISAKI METER ​ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile  http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.

CEDAR SUGISAKI METER markasına ait tüm ürünler

    0 kayıt bulundu

      ALFABETİK MARKA LİSTESİ

      Ürün Gruplarına Göre Filtrele

      Sertifikalarımız

      Oruçreis Mah. Tekstilkent Tic. Mrk.
      G2 Blok, No:101 (10AD-Z77)
      34235 Esenler / ISTANBUL
      T: +90 212 235 95 35 / 36
      F: +90 212 235 95 37

      info@imajteknik.com

      E-Bülten Listemize üye olun !

      Gelişmelerden haberdan olmak ve ileride gerçekleştirilecek yeniliklerimizden haberdan olabilmek için e-posta adresinizi bizimle paylaşın!

      Copyright 2014 İmaj Teknik - Tüm hakları saklıdır.