IS2500 Multi Gas Insitu Analyzer
Cemtrex offers the IS-2500 MGA Series of instruments are designed for on-line analysis of up to five gas phase process components. The analyzer features an innovative design that includes high grade performance, mechanical, optical and electronic components.
LM Series Laser Opacity Monitors
Cemtrex offers the only Laser Opacity Monitor meeting U.S. EPA 40 CFR Appendix B, PS1 (Rev) requirements which sets the industry's highest standard. Our LM Series have been a proven performer with more than 1000 installations worldwide, including 500 in the USA.
IntelliCEMS Series Monitoring Solutions
Cemtrex, Inc. is a full service CEMS (Continuous Emission Monitoring Systems) integration company providing engineering, installation, start-up, commissioning, upgrades, project management, certification and RATA support, scheduled maintenance and emergency support services.
Mercury Monitoring Systems
Cemtrex, Inc. offers a unique line of Mercury CEMS compliant with EPA, CAMR, MACT, and state regulations. Cemtrex also offers Process Mercury Monitors for optimization and injection controls.
Gas Analyzers
Cemtrex offers a wide range of gas analyzers for industrial, ambient, process and compliance markets. These analyzers can measure a variety of gaseous compounds with high accuracy and performance.
Applications Table
Cemtrex products cover a vast amount of applications, including Power Generation, Cement and Lime Production, Waste Facilities, Chemical Plants, Oil Refineries, Metal Production and Pulp and Paper Mills.
Dust & Opacity Monitoring
LM Series Laser Opacity Monitors
Cemtrex Opacity and Dust Monitors cover a broad range of applications, including compliance monitoring and reporting at the stack and process monitoring in a variety of industries and environments.
Access the product specification brochures or contact one of our experienced CEMS professionals to assist you in making the right choice for your application.
LM 3086 EPA3 Compliance Dust and Opacity Monitor
A standard for performance in opacity/dust monitoring, the LM3086 features reliable laser technology with single pass/dual path architecture. Fulfills EPA 40 CFR Appendix B requirements.
LM 3189 Process Dust and Opacity Monitors
With a semi-conductor laser technology for high efficiency and reliability, the LM 3188 is a cost-effective solution for an array of applications, including power plants, cement plants, as well as iron, steel and tunnel applications.
Continuous Emissions Monitoring
IntelliCEMS Series Monitoring Solutions
The CEMTREX, Inc. IntelliCEMS Series offers a comprehensive, efficient and well-engineered package of Continuous Emissions Monitoring Solutions, deserving of its name. Coupled with our IntelliCEMS Freedom Services Package it allows you to relax with confidence, while entrusting your CEMS challenges in our competent hands.
With a variety of technologies out there and constant innovations revolutionizing the monitoring field, it takes a dedicated professional team of CEMS experts to design the optimal solutions for your monitoring needs. Benefiting from long-term experience both in monitoring and in pollution control equipment, our CEMS Professional Engineers are capable of designing, integrating and applying turn-key solutions, using the right blend of proven technology and innovation.
What this means to your company:
- Quality and consistency of measurements in demanding sample matrix environments at the maximum achievable monitoring technologies
- Durable, reliable low maintenance equipment performing with minimum down time, demanding less of your attention so you can concentrate on your primary business.
- Professional CEMS support beginning from application design and lasting throughout the entire life cycle of your equipment
- A spectrum of products capable of optimizing and balancing your technological, compliance and budgetary concerns.
The New 1500 Series product line of digital analyzers from Cemtrex is designed to meet the high performance requirements of compliance stack monitoring, combustion efficiency, heavy industrial process and ambient applications.
Based on proven gas specific detection principles and coupled with microprocessor technology, Cemtrex gas analyzers are stable, sensitive and easy to use. From the rough and rugged conditions in power plants, cement kilns and waste incinerators to the precise and flexible environment at R&D laboratories and pilot installations, the 1500 Series analyzers are proven performers for many satisfied customers.
Common features for the 1500 Series Digital Gas Analyzers:
- Compliance level accuracy and reliability
- High performance and durability in rugged applications
- Suitable for stack emissions testing (CEM) applications and process monitoring
- Full range of proven measuring principles (UV, NDIR, FTIR, CLD, FID, Paramagnetic)
- Reliable, dependable, accurate and cost effective
- State of the art microprocessor technology with digital & analog outputs & inputs
- Operated manually or remotely via TCP/IP, RS – 232C communications
- Analyzer screen display of all alarms and discrete alarm features
- Increased analyzer accuracy through calibration curve fit polynomials
- Automatic local or remote calibration and preset auto calibration
Coupled with Cemtrex Freedom Services Package, the Cemtrex 1500-Series is backed by exceptional customer service and business practices. Our Quality Management program is one of the best in the Industry and we always strive to give exceptional attention to detail, understand the specific conditions at your location and offer you the best solution and support. If you would like to discuss you current needs for air quality measurement equipment, our experienced engineers are always ready to listen. Call us and let us formulate a solution for you.
- Stack Gases (CEM/MACT/Process)
- Combustion Efficiency
- Power Plant De-nitrification, Desulphurization Efficiency
- Turbine/Generator Feedback Control
- APC Systems Efficiency Control
- Process Chemical Analysis
- EPA Method 25A Compliance monitoring
- Carbon Bed Breakthrough Detection,
- Scrubber Efficiency/VOC Abatement
- Personal Safety
- Vehicle Emissions/Fuel Cell Analysis
1510 Series - NO/NOx
The Cemtrex IntelliCEMS Chemiluminescent NO/NOx Analyzer utilizes the principle of chemiluminescence for analyzing the NO or NOx concentration within a gaseous sample.
1510H Series - NO/NOx HCLD
The Cemtrex IntelliCEMS Heated Chemiluminescent NO/NOx Analyzer utilizes the principle of chemiluminescence for analyzing the NO or NOx concentration within a gaseous sample.
1530 Series - Infrared/Oxygen Multi-Component Analyzer
The 1530 Series Cemtrex IntelliCEMS Infrared/O2 Multi-Component Analyzer is based on the infrared absorption characteristics of gases. Using a single infrared beam to measure gas concentrations, this analyzer produces highly stable and reliable results.
1500 Series - Oxygen
The 1500 Series Cemtrex IntelliCEMS Oxygen Analyzer utilizes either the paramagnetic or fuel cell method to determine the percent level of oxygen contained in the sample gas.
1570 Series - Total Hydrocarbon Analyzer (THC)
The 1570 Series Cemtrex IntelliCEMS Total Hydrocarbon Analyzer product line utilizes the principle of Flame Ionization Detection (FID) to determine the total hydrocarbons within a gaseous sample.
1570M Series - Total Hydrocarbon/Methane/Non-Methane
The 1570H Series Cemtrex IntelliCEMS Heated Total Hydrocarbon Analyzer product line utilizes the principle of Flame Ionization Detection (FID) to determine the total hydrocarbons within a gaseous sample.
IS-2500 Multi-Gas Analyzer
Our state-of-the-art in-situ gas analyzer for process and pollution control is designed for analysis of up to 5 gas phase process components. It can utilize IR, NIR, UV and visible spectra depending ont the application.
Cemtrex provides complete integrated analyzer systems and all related services from initial engineering through manufacturing, testing and field start-up. Analyzer Systems are normally supplied and installed in special Analyzer Houses including air conditioning, power distribution, lighting, termination and junction boxes, gas and flame detection, relevant piping and wiring.
Process sample probes and sample transport lines are designed to ensure representative and rapid sampling, avoiding possibility of contamination or dead volume. Sample Conditioning systems provide the sample in a state and condition compatible to the measurement technique used by analyzers. Sample recovery systems, stream selection facilities, telephone modem connections, furniture, special equipment and tools, etc.
TRITON-COL Series for Color
Color and turbitidy measurements are frequently used in many industrial processes across a variety of industries, most dominantly in Food & Beverage, Oil & Gas, and Chemical.
TRITON-CV for Cleaning Validation
The validation of a cleaning process is mandated in virtually any manufacturing process to prevent carryover of material above a predefined acceptable level from one product to another.
Beacon 3000 Process NIR Analyzer
The Beacon 3000 is an inline, multi-channel process analyzer system ideal for monitoring petroleum, chemical and petrochemical products.The Beacon 3000 measures the absorption spectrum in the near infrared (NIR) fast and accurately without labor and material waste.
MOD-8000 Process NMR Analyzer
The MOD-8000 online process analyzer is designed to analyze the composition of process fluids. Using Magnetic Resonance (MR) spectroscopic techniques, it can detect the presence and the concentration of chemical constituents in a process stream.
Reveal Analytical Measurement
The new Reveal Analytical Measurement device offers a unique, option for those users who prefer a dedicated analyzer for a specific application. The Reveal offers a number of advantages over competitive systems for tracking a single attribute. It is primarily useful for liquid, solid, gas, and slurry applications.
BA-DO2 Dissolved Oxygen Analyzer
The BA-DO2 is designed for the measurement of dissolved oxygen in water, with low oxygen content (in the order of parts per billion). The main application is for water treatment facilities in the petrochemical field.
Model 204H & 205P H2S in Water
The Model 204H has the ability to analytically quantify H2S in Water online with the Sample Transfer Stripper (STS) and the advanced electrochemical H2S sensor or rateometric-colorimetric H2S detector technologies.
Model 205 H2S in Crude Analyzer
The Model 205 H2S in Crude Oil Analyzer utilizes the state-of-the-art Sample Transfer Stripper (STS) with exclusive ASI Membrane Technologies to efficiently and reliably separate the H2S from the liquid sample for measurement in the gas phase.
Model 204 Oil in Water Analyzer
The Model 204 Oil & Hydrocarbons in Water Analyzer accurately measures total hydrocarbons including aliphatic and armoatic hydrocarbons. It has the ability to analytically quantify oil/hydrocarbons in water thanks to an enhances Sample Transfer Stripper and a solid state sensor.
BA-PH pH & Redox in Liquids Analyzer
The BA-PH analyzer is designed for the measurement of pH in liquids, typically drinking water, aquaculture systems, rivers, lakes, wastewater and industrial process liquids. The instrument can be deliverted in a multipurpose package containing an oil-in-water analyzer and an H2S in water concentration analyzer.
ViscoPro2100 Viscometer
The ViscoPro 2100 delivers highly reliable, real-time viscosity data. With a small sample size, easy installation, flexible configuration, and minimal maintenance needs, the ViscoPro 2100 is the ideal process viscometer for almost any refinery, petrochemical, or coatings application.
BTX Aromatics in Solvents Analyzer
The BTX is a real time process analyzer ideal for measuring the presence of aromatics (in parts per million) within hydrocarbon solvents. It uses ultraviolet/visible spectrophotometry for achieving very accurate results. The BTX analyzer provides for the real time measurements of Benzene, Toluene and Xylene (heavy aromatics) in hydrocarbon solvents.
6200 Total Sulfur & Total Nitrogen
The Model 6200 Total Sulfur & Total Nitrogen is an online process analyzer that determines total nitrogen and total sulfur for gas, liquid, and LPG products. The product has the capabability to produce lab accuracy with results that correlate to ASTM D4629 and D5453.
44800 On-line RVP Monitor
The PSPI Reid Vapor Pressure (RVP) Monitor is an on-stream process monitor for measuring the RVP of blended fuels, distillates and other multiple component hydrocarbon fuels. By having an online monitoring solution, such as the PSPI RVP Monitor, refineries can optimize plants profitability while at the same time meeting quality requirements.
45607 On-line Flash Point Monitor
The PSPI Flash Point Monitor is an on-stream process monitor for measuring flash points of liquid fuels over a range of 10 to 121 C (50 to 250 F). By having an online monitoring solution, such as the PSPI Flash Point Monitor, refineries can optimize plants profitability while at the same time meeting quality requirements.
MicroDist Boiling Point, Density, & Cetane Index
The MicroDist online analyze ris designed to quickly and accurately determine the boiling range characteristics of various commercially available petroleum products, light and middle distillates, on process streams.
Cemtrex provides complete integrated online process gas analyzer systems and all related services from initial engineering through manufacturing, testing and field start-up. Each of these analyzers features a rugged embedded computer and sensors. Many measurement principles are utilized in measuring the specified gas composition including: spectroscopy, gas chromatography, photoionization detection, electromagnetic energy absorption, palladium sensors, and other techniques. New measurement principles can be added easily to an existing system depending on the application requirements.
Cemtrex offers the most comprehensive and cost-effective solutions for process optimization, minimizing downstream equipment failures, improving feed stock quality, and reducing off-spec product and product giveaway.
Typical industries that can utilize our online process gas analyzers include: natural gas processing, refineries, industrial steel, biogas, metals, lime/cement, food, electrical, glass, wastewater, sewage treatment, and more.
IntelliPRO™ Process Gas Analyzer
The IntelliPRO™ is a simple system with sample probe, heated line , sampling system and Analyzer rack that is field mountable and free standing with all standard outputs to plant DCS or computer systems for closed loop process control.
PLGC3 Natural Gas Chromatograph
The PLGC3 Natural Gas Chromatograph is a thermistor technology Gas Chromatograph analyzer, for fast and reliable gas analysis. It is designed for ease of use, reduced maintenance and low gas consumption in online applications.
BA-GSG Specific Gravity Gas Analyzer
The BA-GSG is an online process analyzer for continuous, reliable, and accurate measurement of specific gravity (density) of a gas mixture. It is equipped with a cell for measuring specific gravity of the process gas in a specially designed sample chamber, using a modulated acoustic signal.
HY-OPTIMA Series (Process Hydrogen)
The HY-OPTIMA product line includes a range of real-time, in-line portable hydrogen monitors & hydrogen analyzers for process optimization in industrial applications. The end result is increased product yield, improved hydrogen utilization, and extended catalyst life.
Series 1600-150 Total Sulfur & H2S
The Model 1600-150 System is a microprocessor based analyzer measures total sulfur and H2S by hydrogenation similar to that as described in ASTM Method D3031, D4084-82, D4468-85 and 4045-81
943-TGX Tail Gas Analyzer
The 943-TGX Tail Gas Analyzer product line is specially designed to measure sulfur species gas for sulfur recovery and other related processes.
SG12WMTA-Series WI/CV Gas Analyzer
The SG12WMTA-Series is a high speed multiparameter thermal gas analyzer that burns a small sample of gas and measures the temperature rise of the fluid. The SG12WMTA-Series consists of a Multiparameter Gas Analyzer that directly measures in real time the most important properties of the gas: Wobbe Index (WI), Calorific Value (CV), Specific Gravity (SG) and Combustion Air Requirement Index (CARI).
IS-2500 Multi Gas Analyzer
The IS 2500 is designed for on-line analysis of up to five gas phase process components using NDIR technology. The systems utilizes a unique in-situ design structure for immense durability and long-term savings.
HY-Alerta (Safety Applications)
The HY-ALERTA product line includes a range of state-of-the-art, portable hydrogen leak detectors and fixed area hydrogen monitors designed to ensure safety within an enclosed or open area where there is the potential for a hydrogen leak.
Cemtrex offers a wide range of gas detection systems for a broad range of applications. Our systems are top of the line, features the best in service that Cemtrex has to offer and is supported by Cemtrex's years of expertise in the field of sensor technologies. Cemtrex offers the most complete line of fixed and portable instruments for the detection of over 150 different toxic and combustible gases using all five of the latest sensor technologies: Solid State, Electrochemical, Infrared, Photoionization and Catalytic Bead.
Cemtrex offers a complete line of instrumentation, including potables, single- and multi-point stationary instruments, stand-alone sensor transmitters, and computerized gas monitoring systems. These instruments serve a large and diverse customer base around the world, with users including refineries, chemical plants, semiconductor facilities, hospitals, food and beverage companies, and many others.
EPA3C COMS Data Converter
Opacity And Optical Density Data Acquisition And Combining Unit For COMS EPA Reporting.
EPA Requires Opacity To Be Reported After Combining The Individual Opacities In Dual Streams / Breaches Before The Exit Stack As Per Part 60 Reporting Requirements
EPA3C ® unit consists of DIN rail mounted OPLC base unit along with IO modules which are also DIN rail mounted which accepts inputs from opacity monitors through standard 4-20 mA or 0-10 V DC signals. A power supply module which is also DIN mounted supplies DC power to the base unit and the IO modules from 120 V AC input. The base unit combines and calculates effective opacity at stack from the data received from the individual streams after taking into account volume flow data and corrected stack exit ration.
Features
- EPA3C ® is the only unit that has customized logic for combined opacity reporting in the market today
- One unit controls up to TWO monitors
- Unit easily mounted onto DIN rail or wall mounted as option
- Provides Membrane Keypad and Graphical display for operator interface for all parameters
- Remote access via modem / Ethernet
- Optional Volume data inputs for real-time data conversion
- Standard key pad entry for volume flow rates for breaches
- Automatically calculates Stack Exit Correction ratio
- Converts optical density to opacity and applies SEC ratio
- Combines and outputs ‘effective’ opacity
- Micro-controller based module
EPA3C is a stand-alone unit that can be used to interface with any standard opacity monitor to report combined opacity at the stack. If any additional logic to be incorporated in the program, it can be easily carried out as the application software platform is very flexible.
V120-CDC CEMS Datalogger & Controller
40 CFR 60 EPA Data Acquisition System for CEMS
- Collects data from Opacity / Dust Monitors, Oxygen analyzers and other Gas analyzers
- Compact Module and DIN / Wall mounted inside the CEMS Rack
- Stores and generates EPA Reports
- Data output to PC via Excel format or Ethernet or hardwired 4-20 mA & Contact outputs
- Outputs include gas concentrations, probe purge status, probe fault, gas limit exceeded, daily zero and span output, status, CEM faults, 6 min (other averaging possible) gas outputs
- Also supports contact inputs to start probe purge, manual calibrations and other AUX inputs
- Long term storage as option & generates EPA Reports to PC
- Completely controls CEMS for calibrations, probe purging, sampling system control and CEMS data outputs
- Remote access for easy servicing of monitors
- Standard program pre-loaded for CO, CO2, SO2, NOx, Dust, Oxygen, Flow, Fuel input, Temperature, Pressure, Moisture and other site configuration is easy
Special Features
Improved CEMS Technician Productivity
CDC data controllers are specifically designed to perform the CEMS operations you need. In addition, they provide the CEMS technician with a local interface to initiate calibrations, modify calibration sequences, troubleshoot CEMS operation, and modify channel assignments and input/output settings.
Complete Regulatory Compliance Control for the Environmental Staff
CDC data controllers provide the environmental staff with the ability to modify the configuration of the controllers and to address changes to federal, state or local compliance requirements. Controllers offer full functionality and can be configured via a menu driven interface. There is no need to modify ladder logic or computer code.
Information you need to optimize compliance
As the backbone of our DAS, CDC controllers provide plant operations staff with the real-time access to compliance calculations needed to optimize plant operations.
Minimizes the risk of “out of control” data
CDC data controllers automate the control of the CEMS to minimize “out of control” data by providing calibration sequencing and data storage independent of DAS computer operations.
Eliminate loss of compliance data
CDC data controllers are designed to acquire and store CEMS data to ensure that no data is lost in the event of a communication failure with the DAS computer.
V130-EPA3-DC Opacity Monitor Data Collector
40 CFR 60 EPA Data Acquisition System for COM
- Collects data from Opacity / Dust Monitors
- Compact Module and DIN / Wall mounted
- Stores and generates EPA Reports
- Data output to PC via Excel format
- Long term storage as option
- Collects data from four (4) monitors
- Remote access for easy servicing of monitors
EPA Report Generator
V130-EPA3-DC is a compact OPLC based Data collector module that easily interfaces to existing opacity / dust monitors at site and collects data like Instantaneous opacity, Average opacity, Fault conditions, Alarm conditions and stores in easily accessible Tables in the OPLC memory for transmission to site PC or DCS systems for long term storage and hard copy printing for submissions of emissions reports to local authorities.
The Module generates 6 Minute Average Report, Excess Emissions Report, Daily Zero / Span Calibration Report and Monitor Down-time Report. All the reports have Date / Time Stamps along with Tags for easy viewing and printing.
The Remote access feature allows the monitor (s) to be dialed in from remote locations for easy servicing and Ethernet based web access is also available V130-EPA3-DC interfaces to most of the major brands in the market today including Thermo, Monitor Labs, Durag, Land, KVB and many other models.
Up to four (4) monitors can be hooked up to one V130 module with expandable Add-on modules that enhances the IO capability easily. These IO modules can be added at a later stage also if required as the monitoring requirements change at the site.
The V130 has internal Battery that can hold critical data like date / time, set parameters like Opacity Plant Limit, Calibration verification time etc. The OPLC Graphical display shows all real time monitored data continuously for easy viewing and setting user parameters.
Cemtrex Monitoring Instruments & Products Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.