FIRSTO firestops are designed to seal multi-cable and cable tray penetrations of fire-rated walls and floors. FIRSTO fire stops are developed as a modular system which is simple to assemble around the cable run against the wall or on the floor. Working in inaccessible openings is often cumbersome, but with FIRSTO, this is a thing of the past. 

The system is not only easy to install, but it also makes it a simple job to add or remove cables at a later date. The fire stop prevents the spread of smoke and fire, and can withstand heavy mechanical loads.

FIRSTO is specifically suitable for the fire resistant ducting of cables and/or cable trays through wall and floor penetrations. No other firestop can offer the high level of security with the flexibility, time and cost savings and highest quality standard that FIRSTO offers.

Typical Areas of Application:

• Petrochemical industry

• Telecom and computer industry

• Any work area where cable maintenance and frequent changes may be necessary

Features:

• Designed to provide a simple solution for both new and existing cable penetrations
• Cellular rubber with closed cell structure to prevent moisture absorption
• Rubber is activated and expanding when exposed to flames or extensive heat
• Self-correcting fire stop system
• UL Classified Firestops
• Adding or removing cables an easy matter
• Front of the sealing system can be covered with FIWA® or NOFIRNO® sealant for outdoor use
• Proven - modular casings to fit to cable ways
• The system of choice for installations with continuous changes in the cable set

Product Characteristics

The  RISE/ULTRA technology makes the CRUSHER system applicable for all types of plastic pipe penetrations.

The CRUSHER Sleeves squeeze down the plastic pipe, and seal the opening during a fire. 

 

During fire exposure the RISE/ULTRA compound forms an adhesive mass, thus preventing the spread of smoke, fire gas and water. 

The CRUSHER system is approved for a multiple mixture of all kinds of plastic pipes. The CRUSHER Sleeves or Wraps are combined with the NOFIRNO sealant that adheres well to plastics and offers a high degree of water tightness. 

Typical Areas of Application:

• Shipbuilding / Marine / Offshore

• Building and construction

• Other environments where the safety of people and installations has to be guaranteed

 

Features:

• Most simple and effective system for all plastic pipe penetrations

• RISE®/ULTRA C-FIT CRUSHERS squeeze down and seal opening during a fire

• RISE®/ULTRA wraps to be used for oversized conduit sleeves

• NOFIRNO® filler sleeves are used for filling larger spaces

• NOFIRNO® sealant adheres well to all plastics: provides a high degree of watertight integrity - even after fire

• Approved for a mixture of all kinds of plastic pipes

• Products are resistant to fire (heat),
• Waterproof,
• Gas does not leak,
• Smoke does not leak,
• Hard strength against rodents,
• Noise reduction,
• Corrosion resistant for a long time,
• Easy setup

The SLIPSIL - MPP system is designed to provide a simple solution for both cable and pipe penetrations. The system can be used for transits carrying a variety of pipes/cables with different diameters. The SLIPSIL - MPP system is easy to specify, and installation is quick and easy.

SLIPSIL - MPP provides a modular solution to penetrations with multiple cables and/or pipes with varying outside diameters. It consists of a standard SLIPSIL Sealing Plug, Multi-Passage Module (MPP) made from high-grade HMPE, and DYNATITE Sealing Plugs.

The SLIPSIL - MPP sealing system allows easy access for later passage of pipe or cable. Since the sealing system is based on the unique SLIPSIL self-compression installation method, there are no bolts or other compression mechanisms required,. The SLIPSIL - MPP modules offer a variety of configurations and are the ideal solution for ducting in concrete pits and foundations.

Typical Areas of Application: 

• Water & Wastewater

• Electrical & Telecom Utilities

• Industrial Facilities

• Commercial & Institutional Facilities

Features:

• Designed to provide a simple solution for both cable and pipe penetrations

• For transits carrying a variety of pipes/cables with different diameters

• Quick & easy installation

• Simple access for later passage of additional pipes or cables

• No bolting or other mechanical compression devices required

• Passage Modules made of high-grade HMPE - long service life

• Watertight & Gas-tight integrity ensured

• No metal parts - no corrosion

Split Frame system is designed for application in areas where an existing, leaking penetration seal cannot be removed, or there is not enough depth to install the NOFIRNO System.

The CSD Split Frames are made of an impact resistant plastic, and can easily be assembled to form a multi-bay configuration. To install, simply place the sections of split frames around the existing cables or pipes, place a NOFIRNO® gasket between the frame and wall / floor, then attach the frames. Once the frames have been installed, the NOFIRNO® Sealing System is applied in order to create a watertight / gas-tight seal. 

Typical Areas of Application:

• Water & Wastewater

• Electrical & Telecom Utilities

• Industrial Facilities

• Commercial & Institutional Facilities

Features:

• Modular design allows for unlimited combinations and sizes of frames to accommodate all applications 

• Provides high levels of water and gas-tight integrity in combination with the NOFIRNO Sealing System

• Frames contain no metal parts - prevents corrosion

• NOTE: NOT FOR USE IN FIRE RATED BOUNDARIES!

The Modular Cast-in Sleeve System was designed primarily for use with the SLIPSIL® Sealing Plugs, but can also be used as a standard penetration sleeve for our NOFIRNO product.  

The ID’s of the Cast-In sleeves correspond to the OD’s of the SLIPSIL® Sealing Plugs to ensure a watertight / gas-tight seal, and ensure ease of installation for the plugs. The Sleeve System is fully modular, and allows the sleeve to be adjusted to the thickness of the concrete wall or floor that is being poured.

Typical Areas of Application:

• Industrial buildings 

• Commercial buildings

• Institutional buildings

• Use as an alternative to core drill holes

Features:

• Made from high grade, impact resistant plastic

• Sleeve flange acts as a water barrier, and also ensures fixation into concrete to prevent loose sleeves

• Modular components allow for installation in virtually any wall or floor thickness

• Heat resistant plastic is available for 2-hour fire rated applications

About the GLANDMOD System®

The GLANDMOD System is an innovative alternative to cable glands and block-style cabinet seals for cable entries into cabinets and other OEM equipment. The modules are available in HMPE plastic or aluminum, and come in various configurations. The plugs are available in different sizes to accommodate cables or small pipes from 4mm up to 40mm.

Features:

• Water and gas tight

• Blast proof

• IP 68 rated

• NOFIRNO® Plugs available for fire-rated applications

• NOFIRNO® gasket used to provide seal between module and cabinet

The CONTROFIL® System is the newest innovation in cable penetration sealing systems. The proprietary rubber blocks are designed only as passage modules for cables (not compression devices), which ensure neat cable routing. The superior sealing capabilities of the system are achieved by the use of the NOFIRNO® Sealant, which prevents damage to cables that is often seen with compression based systems. CONTROFIL® steel frames are available in combinations to allow for maximum flexibility of cable ducting.

• Designed for cables 1mm OD to 105mm OD

• Provides high levels of fire, water and gas tightness

• Labor savings – installs in a fraction of the time compared competitive systems

• Easy re-entry for future cable changes – no need to replace blocks or disassemble system

• More compact than traditional block systems

• No tight tolerance requirements

• No internal metal parts – no corrosion

• No mineral wool in the system – protects against internal transit corrosion

• Provides vibration absorption and sound dampening benefits

• System based on adhesion, not compression. Safe for fiber optics!

The NOFIRNO® / AQUASTOP® sealing system is a proprietary, state-of-the-art method for sealing existing pipe and cable penetrations that are experiencing real-time water leakage. The system can be applied to wet surfaces, resulting in a long-term seal against further water ingress. Any existing, leaking seal already in place can either be removed or remain when utilizing the NOFIRNO® / AQUASTOP® system.

• Applicable for all types of cables and pipes

• Provides high levels of gas and water tightness

• No special transit frames required

• Easy re-entry for future cable or pipe changes 

• Installs over existing, leaking seal if it cannot be removed

• Can be installed over leaking link-type seals

• No metal parts – no corrosion

• Provides vibration absorption and sound dampening

• Prevents condensation on service pipes

• Allows longitudinal and radial movement of pipes

• Provides protection against rodent ingress

ACTIFOAM® is a unique, proprietary product based on the ACTIFIRE® Technology by Beele Engineering. It has a wide variety of applications in both industrial and marine / offshore environments

ACTIFOAM® is available in a wide variety of sizes and configurations that can be adapted to unlimited, challenging applications in a variety of installation areas. 

ACTIFOAM® expands on the basis of confined air in the presence of heat or flames, it is therefore not classified as an intumescent material. The material can easily be field cut to the appropriate size requirements. ACTIFOAM® is a closed-cell, material that will not absorb or retain moisture. 

Benefits:

• High level of fire resistance

• Thermal protection

• Low surface temperature under fire

• Remains mechanically intact

• Easily cut for field applications

• Non Fibrous - no mineral wool

• Excellent resistance again weathering, UV and ozone

• Age tested to 50+ years

• Lowest smoke and toxicity material

Practical Applications:

• Temporary fire resistant sealing of penetration openings during construction work in marine and onshore environments (ACTIFOAM Temporary Seals)

• Fire resistant sealing of doors and hatches

• Sealing of gaps in any type of construction environment

• Perfect for application in critical vehicle and mass transit tunnel areas

• Fire resistant ducting of busbar systems 

• Permanent cable / cable tray firestop penetrations (Canada only!)

About :

NOFIRNO Cable  Duct Seal System

The NOFIRNO® Duct Seal System is the proven choice for watertight and gas-tight protection for cable ducts, manhole entries, duct bank entries, and similar applications where cables exit ducts or core-drill holes. This system is used extensively in the utility industries worldwide to protect critical applications in substations and other areas where fire, water and gas ingress must be prevented. Use as a better alternative for inflatable bags, foams and other duct sealing materials that often fail shortly after installation.

• Provides high levels of fire, gas and water tightness

• Labor savings – installs in a fraction of the time compared competitive systems

• No special transit frames required

• Easy re-entry for future cable changes – no need to replace material

• No metal parts – no corrosion

• No mineral wool in the system – protects against internal duct corrosion

• Provides vibration absorption and sound dampening

• Age tested to over 50 year service life

• Use in conjunction with NOFIRNO® / AQUASTOP® System if running water is present in ducts

• Provides excellent protection against rodent ingress