Daiichi Electronics Digital Measuring Instrument

LCD Meter

Daiichi Electronics POWER LINE SUPER MULTI-METER
SQLC-72L

Compact Size
DIN 72 Multi Meter

Compact size power meter with multi-function & high-visibility.
Small size but easy to use and easy for viewing.
Multi meter compatible with international standards.

 

Daiichi Electronics Electronic LCD meter LC series

USE

Electronic meter w/ easy understanding of load state by bar graph display and adopting analog/ digital display for accurate reading. Product line up is following: DC receiving meter XLC-110 for DC measuring, DC input meter TLC-110 for DC power measuring.

Total cost reduction of distribution panel such as space saving/saving of wiring work can be achieved because various functions are integrated in 1 unit according to the purpose. Centralized control can be realized in line with system by adding various input/output options

 

Daiichi Electronics Electronic DC receiving meter
XLC-110/XLC-110L

CatalogIn measuring various physical quantities, they are converted to electrical signals and displayed. This product is used for the purpose of display.
Centralized monitoring in line with system is possible as 3 physical quantities can be displayed simultaneously and 3 analog outputs in proportion to those physical quantities can be extracted.
e_LC_XLC_Reva.pdf

 

Daiichi Electronics DC input meter
TLC-110/TLC-110L
Most suitable for measuring of DC circuit such as DC power cubicle, wind power generation, solar power generation.Voltage/current of DC circuit(up to 3 circuits at max.) can be measured w/ 1 unit.
Centralized monitoring in line with system is possible by adding analog output
e_LC_TLC_Reva.pdf
.

Daiichi Electronics DIN Standard Digital Meter
M-96 series

 

Daiichi Electronics DC Input Digital Panel Meter

 

Product	Manufacturer	Type	Catalog
DC input digital panel meter	Daiichi Electronics	DP3-11H3	DP_DP3-11H3H4_Reva.pdf
	Daiichi Electronics	DP3-11H4
	Daiichi Electronics	DP4-11C	DP_DP4-11C_Reva.pdf
	Daiichi Electronics	DP5-11C	DP_DP5-11C_Reva.pdf
	Daiichi Electronics	DP30-11C	DP_DP30-11C_Reva.pdf
	Daiichi Electronics	DP35-11C	DP_DP35-11C_Reva.pdf
	Daiichi Electronics	DP40-11C	DP_DP40-11C_Reva.pdf

 

Daiichi Electronics Digital Display Indicator

Digital display

LPD series

BCD Input for Mosaic

7-segment Input for Mosaic

OUTLINE

This product is a digital display for system which is most suitable for display of various data of main equipment in mounting of graphic panel for centralized monitoring control and mosaic panel, etc. along with the development of automatic measuring recently.
This product can be used for display of electrical quantities/physical quantities according to the purpose of use.

 

FEATURES

LPD04SA-15B-R

Noise-resistance design w/ high quality and high reliability.

Simplified wiring work is achieved w/connector.

High brightness LED element is adopted.

 

Manufacturer	Product	Type	Catalog
Daiichi Electronics	display for 15mm mosaic (BCD)	LPD( )( )SA-( )( )B-( )-( )	e_LPD_SA_Rev0.pdf
Daiichi Electronics	display for 50mm mosaic (BCD)	LPD( )( )-( )B-( )	e_LPD_BS_Rev0.pdf
Daiichi Electronics	display for 50mm mosaic (7 segment)	LPD( )( )-( )S-( )

 

Tap Location

Daiichi Electronics Digital tap position display LPD series

OUTLINE

Tap position of transducer is LED displayed by contact input of BCD system w/ this product.
Large character (character height: 25mm) provides easy product handling w/ easy recognition from distance place.
This product can be used for centralized monitoring.

LPD2-11T1

LD-75-H1

FEATURES

High withstand voltage design: AC2000V, 50/60Hz 1 minute.

Easy maintenance is provided by panel mounting method and panel drawing method.

Easy-to-see digital display w/ character height 25mm, 7 segment LED (red).

 

Manufacturer	Product	Type	Catalog
Daiichi Electronics	digital tap position display	LPD2-11T1	LPD2_11T1H2_Reva.pdf

 

Alarm

Daiichi Electronics Digital Sounder DBBC series

DBBC-100 series

 

Outlines
DBBC series are compact electronic alarms responding to digitalization/sophistication of power receiving and distributing facilities today. DBBC series can output bell, buzzer and chime at the same time. Volume of each sound can be adjusted easily with a front volume control. Moreover, the series are highly reliable products which alarm can withstand up to 96 hours of continuous output.

Features

Three kinds of alarm sounds, bell, buzzer and chime can be outputted by a single unit of the product.

No electrical noise generates because the sound is electronic.

Compact and lightweight

All alarm sounds can be outputted at the same time

With test function

96 hours of continuous alarm output is guaranteed.

 

Standard electronic sound sample (WAVE format)

 BELL

 BUZZER

 CHIME

Catalog

DBBC_DBBC_Reva.pdf

 

DE6-83A-P1,P3

OUTLINE

DE6-83A-P1 is an electronic digital counter which can extract 6 digits BCD output.
Connection is simplified w/ connector and input-output is completely insulated in AC2000V.
Also anti-noise measure is fully considered according to our long experience of heavy current measuring.
 

FEATURES

W/ enumerated value initialaization setting function.

W/ manual reset, external reset function.

W/ memory during power failure, enumeration function.

Maintenance of back up power is not required as condenser back up system is adopted.

Panel-back type w/ highly reliable parts.

 

Manufacturer	Product	Type	Catalog
Daiichi Electronics	digital counter	DE2600	e_DE_DE2600_Rev0.pdf
		DE6-83A-P1,P3	e_DE_DE83_Rev0.pdf

 

Daiichi Electronics Controller

Automatic synchronizer ASY

OUTLINE

This product is an automatic synchronizer w/ synchronous validation display(LED) used when generators are connected in parallel. Smooth synchronizing can be performed w/ suppressed rush current, less system disturbance, less generator shock by accurate circuit breaker closing at synchronizing point after matching voltage/frequency of both generators.

FEATURES

Space saving is achieved w/ light-weight, small-size. Mounting area is reduced to approx. 1/6 compared with our conventional product(ASY-100).

Easy-to-see display/simple setting. Condition can be easily grasped as this product can be used as analog indicator and appropriate measure can be taken easily. Operation setting is easily performed from front w/ cover being open.

W/ automatic manual control changeover function. Automatic synchronizing start/manual synchronizing start can be selected freely.

W/ reverse power prevention function at receiving. Reverse power at receiving can be prevented by SLOW side closing designation (FB>FG).

Reduction of wiring work is achieved. Input of generator side takes in three phase voltage w/ V connection so far. Same function can be achieved w/ equivalent voltage input to single phase.

 

Product	Type	Catalog
automatic synchronizer	ASY-96	e_ASY_ASY_Revb.pdf
	ASY-96-A( )
	ASY-100

 

Daiichi Electronics Automatic Power Factor Regulator 

Automatic power factor adjuster ASP

 

USE

This product controls power factor of synchronous generator constantly in parallel operation with system.
Power factor of generator can be improved by constant power factor even though load fluctuates.

 

FEATURES

Space-saving is achieved w/ light-weight, small-size. Mounting area is reduced to approx. 1/6 compared with our conventional product (ASP-101).

Easy-to-see display, simple setting Power factor control state and power factor current value can be easily displayed by panel mounting. Setting value can be changed easily from front w/ cover being open.

Hunting prevention of control Hunting is prevented and control is performed quickly as pulse width is automatically set by deviation.

 

Manufacturer	Product	Type	Catalog
Daiichi Electronics	automatic power factor adjuster	ASP-96	e_ASP_ASP_Rev0.pdf
		ASP-101

 

Auto Receiving Power Factor Controller

Automatic receiving power factor adjuster AQS-200 series

 

USE
This product controls reactive power of generator which operates in parallel with receiving and keeps the power factor of receiving area of demander side to be approx. 1 w/ high accuracy. There is a function w/ which reactive power of each generators are distributed proportionally when multiple generators are connected. Also ideal operation state of generator can be established by combining with separate automatic load distribution equipment(ALS-200R).

 

Type AQS-200R   FEATURES Receiving power factor control w/ high accuracy This product can control receiving power factor to be a constant value as reactive power of generator is indirectly controlled. Generator protection function Limit value of reactive power which generator tolerates is inputted and control is performed for generator not to exceed the limit value. This control is prioritized to receiving power factor control. ON/OFF of phase advancing condenser. ON/OFF of phase advancing condenser is possible from this equipment. Constant and stable receiving power factor control is possible w/o reactive power of generator reaching to limit value by selecting appropriate condenser bank. Receiving power factor control failure detection. Receiving power factor control is monitored certain times and failure is detected when control is impossible. Operational sequence external designation. Receiving or generator which is designated as start performs proportioning control as parallel operation. Start designation input should be in line with circuit breaker closing designation. Input voltage/frequency out of range detection Control of bus voltage and frequency is stopped when they are out of control range and LED is ON.

 

Manufacturer	product	type	catalog
Daiichi Electronics	automatic receiving power factor adjuster	AQS-200R	AQS_AQS_Rev0.pdf

 

Daiichi Electronics Automatic Power Controller

Automatic power adjuster AW-101 series

 

OUTLINE

This product controls output of AC generator or output of system receiving power constantly in parallel operation between system and AC generator.

 

AW-101   FEATURES   Easy setting Various control values can be easily set by key operation.   Many varieties of display Current measured value display(digital display: 2 types), setting value display (digital display: 6 types), operational state display.   2 types: for generator constant control/for receiving power constant control. AW-101 : for generator constant control AW-101R : for receiving power constant control   Remote operation of power setting value is possible.   W/ setting value storage function.   Each setting value can be stored during power failure by EEPROM.

 

Product	Type	Catalog
automatic power adjuster	AW-101	AW_AW_Rev0.pdf

 

Daiichi Electronics Automatic Load Sharing Controller

Automatic Load Sharing Device ALS-200 series

USE

This product controls load distribution (proportional distribution control) of multiple generators automatically. Ideal generator unit no. control and proportional distribution control can be achieved w/ receiving power constant control and period setting according to load in parallel operation between receiving and multiple generators. Also receiving min. operation control and generator high output operation control can be selected by changeover of generator starting detection value and possible separation detection value.
Unit no. control/proportional distribution control/frequency control are performed in generator only parallel operation. Task from synchronizing of generator to parallel operation can be performed by combining with synchronizer, power factor adjuster or reactive power distribution equipment.

 

FEATURES

Easy setting Various control value can be easily set by key operation.

Many varieties of display Measured value display (digital display: 7 types) Setting value display (digital display: 20 settings) Control state display (LED display: 6 types) Input state display setting value display (LED display: 7 settings) Output state display setting value display (LED display: 6 settings) Alarm state display setting value display (LED display: 2 settings) Out of control range.

Ideal mean power/mean frequency control can be achieved even though there is large load fluctuation constantly by mean value period setting of power measuring.

Receiving constant power control value can be changed remotely from the distance. Also remote monitoring is possible by analog output.

Operational sequence can be freely designated externally.

Measure for receiving reverse power can be taken at heavy load shutdown.(w/ receiving load UP designation).

Each setting value can be guaranteed during power failure by non-volatile RAM.

 

Product	Type	Catalog
Automatic Load Sharing Device	ALS-210R	ALS_ALS_Rev0.pdf
	ALS-200R

 

Daiichi Electronics Automatic Generator Controller

Collective generator controller AGC series

AGC-300

USE

This product is multi-functioned generator controller to control synchronizing/load distribution/constant power factor/constant voltage/constant frequency/operation unit no. in parallel operation between commercial and generator/between generator and generator.
This product can be used for wide range of purposes such as habitual/emergency power generation, cogeneration, etc.

 

FEATURES

Panel mounting/small-sized thin type controller (DIN144X144).

Generator operation unit no. (up to 8 units at max.) can be dealt with. Most suitable for the system w/possible extension(1 unit is used for each generator).

Safe operation can be realized in line with system as setting/changeover of operating condition is simple.

Safe controller w/ synchronous check relay, receiving reverse power prevention, generator overload prevention

 

product	type	catalog
collective generator controller	AGC-100	AGC100_AGC100_Rev0.pdf

 

product	type	catalog
generator controller	AGC-300	e_AGC300_AGC300_Rev0.pdf

 

Daiichi Electronics Synchronizer Check Relay

Synchronous check relay CSY-96

USE This product is synchronous check relay w/ synchronizing validation display for synchronizing between bus and generator/between system and system. This product can be used as failsafe at automatic synchronizing and manual synchronizing.

CSY-96   FEATURES     Integrated version of synchronous check relay and synchronoscope.     Synchronous check signal can be set to be ±3°to ±35°.     Detection/setting of voltage difference, frequency difference is possible.     W/ dead bus detection function.     High quality/high reliability.

 

product	type	catalog
synchronous check relay	CSY-96	e_CSY_CSY_Revb.pdf

 

Daiichi Electronics Voltage Controller

D/A transducer for AVR DATT2-83A

Use

This device is a D/A converter for dynamo automatic voltage regulators. The device receives a UP or DOWN no-voltage signal (or voltage signal) from outside, then outputs an analog signal for AVR. The device increases or decreases the analog output in proportion to the ON time of UP/DOWN.

 

DATT2-83A

Features Superior in reliability and life duration by adopting a micro-computer. As an option, the device can extract an output (contact point) signal against detection of abnormal operation of CPU. With self-diagnosis function, output can be reset to its default value when there occurred an internal abnormality. Voltage change/time is settable with front VR. Control power supply DC16.8 to 56V is manufacturable as well as AC/DC AC85 to 253V/DC70 to 143V, supporting a wide range of power supply. Between each of input/output/control power supply/earth, withstand voltage AC2000V 50/60Hz, insulation for 1 minute. Compatible with DATT1-83A

 

Product name	Type	catalog
D/A transducer for AVR	DATT2-83A	DATT2_83A_Reva.pdf

 

Daiichi Electronics Automatic Three Phase Power Factor Regulator

Automatic three phase power factor controller PFQ series

USE

This product is an automatic power factor controller for three phase to control the closing amount of power condenser automatically.
Following purposes can be achieved w/ this product.

Electricity charges can be saved by power factor discount.
Labor saving by work reduction of power factor monitoring/adjustment.
Effective use of facility capacity can be realized by power loss reduction.
Equipment life can be extended by stabilizing circuit voltage.

 

FEATURES

Small-sized/light-weight (DIN 144X144).

Either PFQ-3 for three circuits or PFQ-6 for 6 circuits can be selected according to condenser control no.

This product can be used for unbalanced load/balanced load of three phase 3 wire circuit, three phase 4 wire circuit (changeover by front switch).

AC110V,AC110/√3V,AC220V (free input).

2 types of control systems: PF control/var control.

Overprogress of power factor at light load is prevented by light load shutdown function.

Condenser can be shutdown from external signal by externally forced shutdown function.

Control system can be selected according to purpose. Cyclic control Optimal control Multi step control (1),(2),(3)

 

product	type	catalog
automatic three phase power factor controller	PFQ-3	PFQ_PFQ_Reve.pdf

 

Daiichi Electronics SWITCH CONTROLLER

SWITCH CONTROL UNIT
FSC-110

2-in-1 Compact Size Switchgear Control and Annunciator Combining Type.
Switch Control Unit with 110mm Square Size.

For controlling ON/OFF capacitor or switchgear.

 

Protective Relay Detector

Multi Relay

AC/DC detector

USE

Small-sized/ multi functioned electronic detector for the purpose of control to respond to several needs such as automation of electric power facility/saving power/ saving energy.
S-63 series is used for protection in various fields such as heavy current circuit measuring/ generator reverse power detection in shipping industry/ frequency control or motor overload detection, etc.
Some measure for damage by power supply switching surge/ damage by input line surge/ false operation prevention is taken.

Type

AC current	SA
AC power	SW
Frequency	SF
AC voltage	SV
AC reverse power	SRW
DC current/voltage	SD

 

FEATURES

High quality/ high reliability noise resistance design.

Voltage/current detector is structured against distorted waveform.

Detection operation can be confirmed by operational display.

Definite time/ reverse time can be integrated.

Many types/ multiple functions are prepared to deal with various needs.

Detector w/ terminal cover can be manufactured.

 

catalog for static type detector S-63 series, etc.

catalog for static type detector S-63/ SFD-HL-73

e_S63_series_Rev0.pdf

 

 

Following catalog is the excerpt of static type detector S-63 series catalog

product	type	catalog
AC/ DC detector	SA-( )-63( )	e_S63_SAVFWRW_Rev0.pdf
	SV-( )-63( )
	SF-( )-63( )
	SW-( )-63( )-3φ
	SRW-H-63( )-3φ
	SD-( )-63
	SD-( )-63D

 

Daiichi Electronics Revolution Speed Detector

AC tachogenerator revolution speed detector STG-63 series

USE

This product receives output signal or output frequency signal of AC tachogenerator and detects starting operation signal/ control signal/ overspeed stop signal, etc. and outputs contact signal. As this product is all electronized, detection w/ high sensitivity, high speed is possible. Some measure is taken not to be influenced by various elements such as external noise.

SFTG-HHH-63

 

FEATURES

High quality/ high reliability noise resistance design.

3 steps of detection level are prepared.

Setting can be easily adjusted externally (adjsuted by screwdriver).

 

catalog for statis type detector S-63, etc.

catalog for static type detector S-63/ SFD-HL-73

e_S63_series_Rev0.pdf

 

 

Following catalog is the excerpt of statis type detector S-63 catalog

product	type	catalog
AC tachogenerator revolution speed (frequency) detector	SFTG-HHH-63	e_S63_SFTG_Rev0.pdf
AC tachogenerator revolution speed (voltage) detector	STG-HHH-63	e_S63_STG_Rev0.pdf

 

Daiichi Electronics Earth Resistance Detector

USE

This product detects earth resistance of non-grounded system DC power circuit and outputs contact signal. Influence such as stray capacitance on wiring circuit of ship is removed as DC bus voltage of measuring circuit is used as it is and earth resistance is sought in bridge detection circuit. Also high sensitivity setting is possible and performance is stable as circuit configuration is not susceptible to influence of power voltage fluctuation.

 

SGR-L-63

FEATURES

Influence by measuring circuit power voltage fluctuation is compensated

Influence of line stray capacitance on measuring circuit is removed.

 

catalog for static type detector S-63 series, etc. catalog for static type detector S-63/ SFD-HL-73 e_S63_series_Rev0.pdf

 

 

Following catalog is the excerpt of static type detector S-63 series catalog

product	type	catalog
earth resistance detector	SGR-L-63	e_S63_SGRDGR_Rev0.pdf
	SDGR-L-63

 

T-70 series

Daiichi Electronics High-precision Frequency Detector

DC Detector (A, V)

High accuracy frequency detector

SFD-HL-74

USE

This product receives frequency signal and detects excess or deficiency of it and outputs contact signal.
As this product is all electronized, high sensitivity setting is possible. Also stable performance can be achieved w/o being influenced by various elements such as vibration and external noise.

FEATURES

High quality/high reliability noise resistance design.

High accuracy 0.01Hz is achieved w/ frequency detection by CPU.

Accurate setting is possible by digital switch.

Detector w/ terminal cover can be manufactured as you specify.

 

catalog for static type detector S-63 series, etc. catalog for static detector S-63/ SFD-HL-73 e_S63_series_Rev0.pdf

 

 

Following catalog is the excerpt of static type detector S-63 series catalog

product	type	catalog
high accuracy frequency detector	SFD-HL-74	e_S63_SFD_Rev0.pdf

T-80 series

Daiichi Electronics Power Flow Detector

SDA-HL-83-33

USE

This is a detector which detects power flow and controls/protects AC equipment, etc.

FEATURES

High quality/high reliability noise resistance design.

Conformed to IEC standard.

Response speed is 60mS or less.

Incoming/outgoing current can be detected from 2 % of rated value.

Relay w/ Au clad cross-bar twin contact/ arc barrier which is most suitable for switching of small power circuit.

 

catalog for static type S-63 series, etc

catalog for static type detector S-63/ SFD-HL-73

e_S63_series_Rev0

 

Following catalog is the excerpt of static type S-63 series catalog

product	Type	Catalog
power flow detector	SDA-HL-83-33	e_S63_SDA_Rev0.pdf

LINE UP OF PLUG-IN ALARM SETTER
Alarm setter input by sensor signals and output by contact signals.

 

PRODUCTS SUMMARY

When DC Voltage/Current or AC voltage inputs reach to High/Low setting limit, contact signal will happen as output. By combinating to sensors of water level, pressure, temperature, etc, further applications such as operation observation or abnormal detection can be used.

Line up based on various types such as actual scale type (dial setting), digital % scale type (digital switching), OLED type or LCD type (measuring value display). All plug-in type alarm setter can be mounted on sockets or on multiple .

 

Türkiyede Daiichi Electronics ile uygun rekabetçi fiyatları almak için müşteri temsilcimiz ile  http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış mühendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.