DELLNER BUBENZER Caliper / Disc Brakes
DELLNER BUBENZER Couplings
DELLNER BUBENZER Drum & Band Brakes
DELLNER BUBENZER Hydraulic Systems
DELLNER BUBENZER Locking Devices
DELLNER BUBENZER Monitoring & Control Systems
DELLNER BUBENZER Motor Mounted Brakes
DELLNER BUBENZER Pneumatic Drum Clutches & Brakes
DELLNER BUBENZER Stop Turn Lock Systems
DELLNER BUBENZER Storm Brakes (Rail & Wheel Brakes)
DELLNER BUBENZER Thruster / BUEL®
DELLNER BUBENZER Wind Turbine Components
DELLNER BUBENZER Components & Accessories
DELLNER BUBENZER WPT Disc Clutches & Brakes
DELLNER BUBENZER
Anti Sway Systems
DELLNER BUBENZER's Anti Sway Systems allow the damping of head-block, spreader and container oscillation generated by acceleration / deceleration of trolley and gantry.
The BAC-brakes is used for stopping and/or holding of fans, blowers, wind turbines, coilers, crane slewing and travel gears etc.
DELLNER BUBENZER
BACW-200
A hydraulic active yaw brake with GL Type Certification and braking force of 620 kN.
Band Brake for large torque applications that can be used for emergencies or back up braking needs. Band Brakes have been around for many years and we offer many ways to operate via thruster, air, hydraulic or hand wheel.
The BOSS® system has been developed based on the experience with the SOS system that has been already installed in more than 200 container cranes world wide.
DELLNER BUBENZER
Brake Control Unit BCMS-4
The BCMS-4 is a micro-controller-based monitoring and switching device for spring applied brakes of the SFB and KFB series.
DELLNER BUBENZER
Brake Control Unit BCU2001
The Brake Control Unit BCU 2001 records characteristic current and voltage variations, which are induced by movements of the armature disk in the magnetic field of the brake coil.
These brakes are for parking utilization, securing the crane against the wind force. In emergency condition they can be operated also as dynamic brakes to stop the crane. They are hydraulic powered with HPU or BUEL® G.
Designed for all rail mounted equipment, like cranes, stackers, reclaimers, etc. Direct holding of idle wheels, particularly where rail clamps or rail brakes cannot be used.
The high capacity of these brakes makes them particularly suitable as service- or secondary emergency brakes e.g. on hoists, slewing drives and belt conveyors.
The BUEL® Model G is a new family member of the DELLNER BUBENZER brand BUEL®. It is a compact thruster to feed active or passive hydraulic brakes and emergency brakes.
The BUEL® Model H is a family member of the DELLNER BUBENZER brand BUEL®. BUEL® thrusters are used for almost all kind of industrial applications.
The BUEL® Model S is a brand new family member of the DELLNER BUBENZER brand BUEL®. It is designed for wheel brakes on rail mounted cranes, where high pulling forces for mechanical wheel brakes are required.
DELLNER BUBENZER
CMB-3 For SB Brakes
Compact status monitoring system for a brake system with display and fieldbus interface.
DELLNER BUBENZER
CMB-3 For SF Brakes
Compact status monitoring system for a brake system with display and fieldbus interface.
DELLNER BUBENZER
Compactus HPU
Compactus is a pneumatically operated hydraulic pump system that multiplies pneumatic line pressure into hydraulic pressure that is sufficient to operate pressure applied disc brakes at rated capacity.
These brakes are for parking utilization, securing the crane against the wind force. In emergency condition they can be operated also as dynamic brakes to stop the crane.
These brakes are for parking utilization, securing the crane against the wind force. In emergency condition they can be operated also as dynamic brakes to stop the crane.
DELLNER BUBENZER 8-090161.021 Bubenzer Seal Kit - Bsc 100.3+100.
DELLNER BUBENZER 8-408.161 Bubenzer Belleville Washer Kit Bsc 100.5 (35 Kn)
Türkiyede DELLNER BUBENZER ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasinveya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.