• 2 year warranty and 60 years of Dynisco industry experience

• Accuracy better than ±0.5%

• TiAlN diaphragm coating is standard

• mV/V, 0-10VDC, or mA outputs available

• Integral temperature sensor option

• Available in configurations that fit most extruder applications

• 1.5M, 3M, 5M, 7.5M & 10M psi pressure range capability

• Integral relay switch for redundant safety and future compliance

• 3rd-party agency analysis (exida™) and self-certified based on FMEDA analysis and internal audit.

• Meets Performance Level ‘c’ as defined by the Machinery Directive (single sensor installed per Category 1).

• Meets Performance Level ‘d’ as defined by the Machinery Directive (two sensors installed per Category 3).

• Meets the following compliance directives, when properly installed and used:

  • Machinery Directive 2006/42/EC

  • NFPA 79 clauses A.9.2, A.9.4.1, A.9.4.3.2

  • EMC Directive 2004/108/EC

  • PED 97/23/EC

• Available on popular mV/V (PT, MDA, DYN) and mA-HART SPX models

• Installation for media temperature up to 400°C

• Rigid stem between diaphragm and housing

• Liquid-filled transmission system

• Electrical build-in calibration

• All stainless steel wetted parts

• Installation for media temperature up to 400°C

• Flexible capillary between rigid stem and housing

• Liquid-filled transmission system

• Electrical build-in calibration

• Installation for media temperature up to 400°C

• Pressure transducer for small areas

• Flexible capillary between diaphragm and housing

• Liquid-filled transmission system

• Electrical built-in calibration

• Exposed, bendable capillary

• Fits in space restricted areas

• Diaphragm diameter 6 mm

• 40% smaller surface area vs. 1/2"-20 UNF-2A thread

• Suitable for smaller diameter of cylinders or pipes

• Accuracy 1.0%

• Temperature range up to 400°C

• Pressure ranges from 0-350 bar to 0-700 bar

• Better than ±0.5% accuracy

• 3.33 mV/V FSO

• Internal 80% shunt calibration

• All stainless steel wetted parts

• 0 - 500 to 0 - 30,000 psi

• Good stability and repeatability

• Flexible stem

• Reliable pressure measurement

• Standard low level output

• Easy set - up

• Corrosion resistant

• Choice of pressure ranges

• Reliable measurement

• Easy to install and ideal for high local temperatures

• Accuracy better than +/- 0.5%

• Dymax® coated stainless steel wetted parts

• Proven sensor design

• 0 - 500 to 0 -30,000 psi

• Internal 80% shunt calibration

• Reliable, repeatable pressure measurements

• Superior abrasion resistance

• Good stability and repeatability

• Wide variety of pressure ranges

• Easy to calibrate with local indicator

• Installation for media temperature up to 400 °C

• Flexible capillary between rigid stem and housing

• Liquid-filled transmission system

• Electrical built-in calibration

• Installation for media temperature up to 400 °C

• Flexible capillary between rigid stem and housing

• Liquid-filled transmission system

• Electrical built-in calibration

• Installation for media temperature up to 400 °C

• Integral thermocouple for simultaneous temperature measurement at the media

• Flexible capillary between rigid stem and housing

• Liquid-filled transmission system

• Electrical built-in calibration

• Installation for media temperature up to 400°C

• Integral thermocouple for simultaneus temperature measurement at the media

• Optional integral RTD element

• Flexible capillary between rigid stem and housing

• Liquid-filled transmission system

• Electrical built-in calibration

• Simultaneously measure pressure and temperature in one location

• Better than ±0.5% accuracy

• 4 to 20 mA, 0 to 5 Vdc, 1 to 6 Vdc, 0 to10 Vdc, 1 to 11 Vdc outputs

• Stainless steel, Armoloy coated

• 0 - 500 to 0 - 30,000 psi

• Internal 80% shunt calibration

• Adjustable zero and span

• Integral thermocouple

• Reliable pressure measurement

• Direct input to supervisory control systems

• Minimizes thread galling, abrasion resistant

• Choice of pressure ranges

• Easy set-up

• >li>Adapt transmitter to process conditions

• Simultaneously measure pressure/temperature in one location

• Better than ±0.5% accuracy

• 4 to 20 mA, 0 to 5 Vdc, 1 to 6 Vdc, 0 to10 Vdc, 1 to 11 Vdc outputs

• Stainless steel, Armoloy coated

• 0 - 500 to 0 - 30,000 psi

• Internal 80% shunt calibration

• Adjustable zero and span

• Integral thermocouple

• Reliable pressure measurement

• Direct input to supervisory control systems

• Minimizes thread galling, abrasion resistant

• Choice of pressure ranges

• Easy set-up

• Adapt transmitter to process conditions

• Simultaneously measure pressure/temperature in one location

• Better than ±0.5% accuracy

• 4 to 20 mA, 0 to 5 Vdc, 1 to 6 Vdc, 0 to10 Vdc, 1 to 11 Vdc outputs

• Stainless steel, Armoloy coated

• 0 - 500 to 0 - 30,000 psi

• Internal 80% shunt calibration

• Adjustable zero and span

• Integral thermocouple

• Reliable pressure measurement

• Direct input to supervisory control systems

• Minimizes thread galling, abrasion resistant

• Choice of pressure ranges

• Easy set-up

• Adapt transmitter to process conditions

• Simultaneously measure pressure/temperature in one location

• Rugged design

• Designed especially for the polymer industry

• 1000 bars max. pressure

• Various TC and RTD

• Flush or blade style

• Blade can be positioned in flow direction

• Various threads available

• DYNISCO pressure transducer mounting hole compatible

• Rugged design

• Designed especially for the polymer industry

• 1000 bars max. pressure

• Various TC and RTD

• Flush or blade style

• Blade can be positioned in flow direction

• Various threads available

• Dynisco pressure transducer mounting hole compatible

• Electrical connection : DIN connector(PT100) or 2-wire thermocouple

• Sensor extends into process

• Type J thermocouple output

• 1/2 - 20 UNF mounting

• 0 to 900°F range

• Flush to 1" immersion lengths

• Better measurement

• Standard output

• Fits in standard thermowell

• Wide range of measurements

• Immersion lengths to match applications

• Type J thermocouple

• 0 - 900°F measurement range

• Fiberglass insulated element

• Adjustable brass or bayonet fitting

• Standard output

• Wide range of measurements

• Protects the wire

• Application versatility

• Spring or armor adjustable

• 0 to 900°F measurement range

• 5 foot and 10 foot lengths

• Fiberglass insulated element

• Application versatility

• Wide range of measurements

• Handles standard application requirements

• Protects the wire

• Universal Input

• 2 Alarm Outputs

• Retransmission

• Min/max Value Hold

• Modbus Communications

• Transmitter Power supply

• Universal Input (Strain Gauge, Voltage, Current, Thermocouple or RTD)

• Min/max Value Hold

• 2 Alarm Outputs

• Retransmission

• Graphical/text LCD Display with color change LED backlight on alarm (red/green)

• Graphical trend view of process, alarms & events as standard

• Easy to use Setup Wizard

• Display of differential pressure is available

• USB port option for access to configuration and log files

• Data logging option logs process values, set points and alarms to .csv file for use with spreadsheets

• Modbus RS-485 and Modbus TCP Ethernet supported

• BlueControl configuration and commissioning software option

• Display pressure, temperature, or even differential pressure

• Optional second input/output for cost-effective single instrument

• Analog retransmission of process variable allows signal to be sent to other devices

• Configure locally or remotely by optional Modbus RTU

• Auto-tuning control in a discrete 1/4 DIN package

• Graphical/text LCD Display with color change LED backlight on alarm (red/green)

• Graphical trend view of process, alarms & events as standard

• Easy to use Setup Wizard

• Single loop control

• Display and control of differential pressure is available

• USB port option for access to configuration and log files

• Data logging option logs process values, set points and alarms to .csv file for use with spreadsheets

• Modbus RS-485 and Modbus TCP Ethernet supported

• BlueControl configuration and commissioning software option

• Pressure range: 0 to 700 bar

• Accuracy: ± 0,1 % of the full pressure range

• Measurement interval: 0,5 seconds

• Medium: Oil

• CE compliant / RoHS compliant

• Pressure range 0-700 bar

• Pressure port 1/2"20UNF or M18x1.5 (other sizes available on request)

• Accuracy <0.05% FS

• Pressure display in 13 different units

• Battery-powered pressure display (mains power supply required for heating and for transferring data to a PC)

• Battery: standard commercially available button cell; Lifespan: >2000h of continual operation

• Data transfer to PC/laptop via USB interface; transfer cable included in delivery

• Oil volumes 57ml (HLP22BP/olive oil)

• Measurement interval 0.5 seconds

• Conforms with CE and RoHS

• DKD (Deutscher Kalibrierdienst / German Calibration Service) certification optional

• Environmental conditions: 0...50°C/5...95% relative humidity

• Dimensions (LxWxH): approx. 470 x 170 x 280 mm

• Weight: approx. 7.2 kg, with case approx. 13 kg

• Pressure range 0-700 bar

• Pressure port 1/2"20UNF or M18x1.5 (other sizes available on request)

• Accuracy <0.05% FS

• Pressure display in 13 different units

• Battery-powered pressure display (mains power supply required for heating and for transferring data to a PC)

• Battery: standard commercially available button cell; Lifespan: >2000h of continual operation

• Data transfer to PC/laptop via USB interface; transfer cable included in delivery

• Oil volumes 57ml (HLP22BP/olive oil)

• Measurement interval 0.5 seconds

• Conforms with CE and RoHS

• DKD (Deutscher Kalibrierdienst / German Calibration Service) certification optional

• Environmental conditions: 0...50°C/5...95% relative humidity

• Dimensions (LxWxH): approx. 470 x 170 x 280 mm

• Weight: approx. 7.2 kg, with case approx. 13 kg

• Welded one piece assembly - no degradation of joint strength at elevated temperatures

• Inconel rupture disk – stable through a wide range of temperatures

• Burst pressure ranges from 1,000 to 15,000psi

• Accuracy of ±10% of rated burst pressure at 300° – 750°F

• Designed for melt temperatures up to 800˚F (425˚C)

• Leak rate exceeds 1x10-6 standard cc/sec

DYNISCO THERMOCOUPLE DYKE

DYNISCO THERMOCOUPLE TI422

DYNISCO THERMOCOUPLE GRMT

DYNISCO TEMPERATURE INDICATOR UPR900

DYNISCO CAPILLARY RHEOMETER LCR 7000 SERIES