E+E Elektronik Humidity Measurement - From the Sensing Element to the Humidity Transmitter
Product range
Transmitters for Industrial Applications
Highest accuracy over a wide T range. Versions for pressure rated, intrinsically safe, chemically polluted, meteorological or high humidity applications.
EE310
High-end humidity and temperature sensor with multifunctional display
Highly accurate and reliable measurement in most demanding applications. The state of the art TFT colour display with integrated data-logging offers extensive error diagnostics and intuitive device setup.
EE33
Industrial humidity and temperature transmitter for permanent high-humidity and polluted environment
High accuracy measurement of relative humidity, temperature and dew point even at high humidity close to condensation or at high chemical load.
EE300Ex
Humidity and temperature transmitter for intrinsically safe applications
Measurement of humidity and temperature in explosion hazard areas for gas and dust. It complies with the classifications for Europe (ATEX), International (IECEx) and USA / Canada (FM).
EE100Ex
Intrinsically Safe Humidity and Temperature Sensor
Reliable measurement of relative humidity (RH) and temperature (T) in explosion hazard areas. Complies with the ATEX (Europe) and IECEx (international) classifications for application in gas up to Zone 1.
EE23
Cost Optimised Industrial Humidity and Temperature Transmitter
Accurate and reliable measurement of relative humidity, temperature, dew point and frost point in the range -40…180 °C (-40…356 °F).
EE220
Humidity and Temperature Transmitter with Interchangeable Probes
The intelligent probes can be mounted directly onto the transmitter or remotely by cable. Ideal for FDA required loop calibration in pharmaceutical and biotech industries.
EE33-M
Humidity and Temperature Transmitter for High-end Meteorological Applications
Exact measurement of humidity and temperature even at permanent high humidity. The dual heating system prevents condensation and ensures short response time and fast recovery after condensing conditions.
EE210
Humidity and Temperature Sensor for Demanding Climate Control
With encapsulated measurement electronics and E+E proprietary coating of the sensor element, EE210 offers outstanding performance even in polluted and corrosive environment.
EE211
Humidity and Temperature Sensor for Continuous High Humidity
Outstanding long term performance in high humidity and condensing environment due to heated humidity probe.
Humidity Modules and Probes
Accurate and long term stable humidity and temperature measurement in cost-effective, compact design.
Humidity Modules and Probes Product
EE1950
Dew Point Measurement Module for High Humidity Applications
Optimised for accurate measurement under high humidity and condensing conditions. Outstanding performance even in polluted and chemically contaminated environment.
EE1900
Humidity Measurement Module for OEM Applications
Dedicated for accurate measurement in climate chambers. Automatic sensor recovery for best long term stability even in chemically polluted environment.
EE08
High Precision Humidity and Temperature Probe
High measurement accuracy over a wide working range and low power consumption for indoor and outdoor measurements.
EE072
Modbus RTU Humidity and Temperature Probe
Highly accurate Modbus RTU humidity and temperature probe. Suitable for demanding process and climate control in industries like agriculture, food, pharma and clean rooms.
EE060 / EE061
Humidity and Temperature Probe with Analogue Output
Humidity and temperature probe with analogue outputs. Outstanding long term stability in polluted environment due to encapsulated electronics and robust sensor with E+E proprietary coating.
EE071
DISCONTINUED - Humidity and Temperature Probe with Modbus RTU
High accuracy, low power requirements and excellent protection against corrosion and pollution make this compact probe ideal for various indoor and outdoor applications.
EE046
Condensation Monitor
EE046 detects the danger of condensation on pipes, ducts and other surfaces before condensation actually occurs.
EE07
Humidity and Temperature Probe with Digital Output
Compact design, digital output and M12x1 connector facilitate easy installation and replacement of the EE07 humidity and temperature probe.
EE040
OEM Humidity and Temperature Sensor
Accurate and long term stable compact, with voltage output and outstanding price/performance ratio.
EE03
Digital Humidity and Temperature Module
A very small design and the digital output are ideal for OEM applications. Customised modifications such as different dimensions are possible.
Transmitters for HVAC
Accurate, reliable and long term stable humidity and temperature measurement in building automation and climate control, possibly customised.
Humidity HVAC Products
EE210
Humidity and Temperature Sensor for Demanding Climate Control
With encapsulated measurement electronics and E+E proprietary coating of the sensor element, EE210 offers outstanding performance even in polluted and corrosive environment.
EE160
Humidity and Temperature Sensor for Building Management
Ideal for HVAC and building automation. Cost-effective and accurate measurement of relative air humidity and temperature.
EE211
Humidity and Temperature Sensor for Continuous High Humidity
Outstanding long term performance in high humidity and condensing environment due to heated humidity probe.
EE10
Humidity and Temperature Room Sensor
Analog, Modbus, BACnet or passive output in an elegant, easy to install enclosure. Ideal for residential and commercial building automation.
EE150
Compact Humidity and Temperature Transmitter for HVAC and Building Technology
Compact humidity and temperature transmitter optimized for HVAC and building automation, with outstanding price/performance ratio. Analogue outputs and passive T sensor option. The clever enclosure design minimizes installation costs.
EE046
Condensation Monitor
EE046 detects the danger of condensation on pipes, ducts and other surfaces before condensation actually occurs.
EE210 Outdoor
Humidity and Temperature Sensor for Outdoor and Meteorological Applications
EE210 Outdoor is optimised for relative humidity and temperature measurement in outdoor and meteorological applications.
Data Loggers
Humidity, temperature, CO2 and pressure as well as analogue signals.
Datalogger for Humidity / Temperature
Dataloggers for accurate and reliable recording of climatic values for air humidity and temperature. Dataloggers with internal or remote sensors for use in the HVAC sector. Multi-channel dataloggers for high accuracy climatic monitoring on up to 32 measurement points.
Humidity Data Logger Products
Humlog 20
Data logger for humidity, temperature, air pressure and CO2
Data logger for humidity, temperature, air pressure and CO2 concentration optimised for indoor climate monitoring.
Humlog 20 E
Data logger for external sensors
Data logger with analogue and digital inputs for humidity, temperature, current, Voltage, Pt100, thermocouple. Network-compatible by built in Ethernet interface.
Humidity Hand-held Meter
With logging capability and a wide choice of intelligent, interchangeable probes, for a multitude of climatic measurands.
Hand-Held Meters for Humidity / Temperature
Humidity Hand-held Products
Omniport 30
Multifunctional hand-held meter
Hand-held meter with interchangeable digital probes for accurate measurement of humidity, temperature, CO2, air velocity and volumetric flow
Wireless Humidity Sensors
High quality wireless transmitters for humidity, temperature and CO2 measurement.
The wireless humidity and temperature transmitters EE244 and EE245 combine state-of-the-art sensor technology with excellent transmission reliability. The wireless network is very easy to set up via web server and can contain up to 500 wireless transmitters.
Humidity Wireless Products
EE245
Room wireless transmitter for temperature, humidity and CO2
IEEE 802.15.4 protocol, 2.4GHz, 1000m open field range. Dual wavelength NDIR CO2 measurement principle, outstanding temperature compensation and long term stability. High end E+E capacitive humidity sensor. Snap-on, stylish enclosure.
EE244
Modular Wireless Transmitter for Temperature, Humidity and CO2
IEEE 802.15.4 protocol, 2.4GHz, 1000m open field range. In a robust enclosure with external antenna and optional display, EE244 accomodates up to three pluggable, interchangeable probes for temperature, humidity and CO2.
EE242
Base Station
For a network of up to 500 wireless transmitters EE244 and EE245. Setup of the wireless network via web server. The measured data is available on the Ethernet, Modbus RTU and TCP/IP, and analogue outputs as well as on the optional display.
Wireless Humidity Sensors
The wireless humidity and temperature transmitters EE244 and EE245 combine state-of-the-art sensor technology with excellent transmission reliability. The wireless network is very easy to set up via web server and can contain up to 500 wireless transmitters.
Humidity Wireless Products
EE245
Room wireless transmitter for temperature, humidity and CO2
IEEE 802.15.4 protocol, 2.4GHz, 1000m open field range. Dual wavelength NDIR CO2 measurement principle, outstanding temperature compensation and long term stability. High end E+E capacitive humidity sensor. Snap-on, stylish enclosure.
EE244
Modular Wireless Transmitter for Temperature, Humidity and CO2
IEEE 802.15.4 protocol, 2.4GHz, 1000m open field range. In a robust enclosure with external antenna and optional display, EE244 accomodates up to three pluggable, interchangeable probes for temperature, humidity and CO2.
EE242
Base Station
For a network of up to 500 wireless transmitters EE244 and EE245. Setup of the wireless network via web server. The measured data is available on the Ethernet, Modbus RTU and TCP/IP, and analogue outputs as well as on the optional display.
Humidity Sensing Elements
High accuracy humidity sensors for mass applications such as automotive or home appliance
Humidity Sensors
The digital humidity sensor EEH210 impresses with high accuracy and with the unique protection from contamination and corrosion by the proprietary E+E sensor coating. The design-in is simplified by a wide choice of interfaces: I²C, PWM, PDM and SPI.
The capacitive humidity sensors HCT01, HC109, HMC03M, HC103M2 and HC102 offer outstanding linearity, high sensitivity and long-term stability, as well as an excellent reproducibility of the sensor characteristic.
Humidity Sensors Products
EEH210
Digital Humidity and Temperature Sensor with 3 V Supply Voltage
RH/T sensor with integrated sensor coating. With digital interfaces I2C, PWM, PDM and SPI.
HCT01
Pre-adjusted, capacitive humidity sensor
Very robust RH/T sensor with integrated sensor coating. The pre-adjusted versions eliminate the need for humidity adjustment by the user.
HMC03M
Heated Humidity Sensor for Radiosondes
HMC03M is optimized for very short RH response time even at very low temperature in the upper atmosphere.
HC103M2
Very Fast Humidity Sensor for Radiosondes
With its short response time at low temperature HC103M2 is dedicated for radiosondes and demanding meteorology applications.
HC109
Miniature SMD capacitive humidity sensor
With excellent price/performance ratio, HC109 has been specially designed for application with space restrictions.
HC201
Capacitive humidity sensor with leads
High quality and excellent price/performance ratio, ideal for use in HVAC measuring devices.
Humidity Calibration
High-end, dual-pressure humidity calibrator traceable to international standards.
Humidity Calibration Products
Humor 20
Humidity calibration with a high-end humidity calibrator
High accuracy humidity calibration with two-pressure humidity generator. Traceable to international standards.
Humidity Calibration Kit
For a quick humidity check
The humidity calibration kit is a simple solution for the calibration of humidity transmitters.
E+E Elektronik Dew Point Monitoring – Dew Point Sensors and Transmitters
Product range
Dew Point Transmitters
For dew point measurement of very low dewpoints. Monolithic dewpoint sensor for very high measurement accuracy.
Dew Point Transmitters for Low Dew Points
E+E dew point transmitters are suitable for installation in compressed air systems and pipelines with an operating pressure of up to 100 bar (1450 psi) and precisely measure the dew point temperature down to -60 °C Td (-76 °F Td).
As they are very small and highly accurate, E+E dew point transmitters are also ideal for OEM applications, for example for adsorption dryers, refrigeration dryers or plastic dryers.
- Smooth production processes thanks to dry compressed air.
- For compressed air systems, plastic dryers and industrial drying processes.
- Auto-calibration procedure for accurate measurement of very low dew point temperatures.
Dew Point Transmitters Products
EE371
Compact Dew Point Sensor
Robust metal enclosure with optional display for accurate measurement down to -60°C Td (140 °F Td)
EE355
Dew point sensor / transmitter for industrial drying processes
The compact EE355 dew point transmitter with outstanding price/performance ration is otimised for applications in compressed air systems or industrial drying processes.
EE354
Miniature dew point meter for refrigeration dryers
Dew point monitoring down to -20 °C (-4 °F) Td. The ideal dew point meter for monitoring refrigeration dryers.
Condensation Monitor
Dewpoint monitor prevents reliably condesation on pipes or plane surfaces.
Condensation Monitor / Dewpoint Monitor
Dewpoint monitor for reliable prevention of condensation on pipes or plane surfaces.
Condensation Monitor Products
EE046
Condensation Monitor
EE046 detects the danger of condensation on pipes, ducts and other surfaces before condensation actually occurs.
Dew Point Hand-Held Meter
For dew point measurement in HVAC applications.
Hand-Held Meters for Dew Point Measurement
Dew Point Hand-held Products
Omniport 30
Multifunctional hand-held meter
Hand-held meter with interchangeable digital probes for accurate measurement of humidity, temperature, CO2, air velocity and volumetric flow.
E+E Elektronik Moisture in oil measurement
Product range
Oil Measurement Transmitter
Oil condition sensor for oil moisture measurement in transformer oil or gear oil.
Transmitter for Moisture in Oil Measurement
The oil condition sensors measure the moisture content of an oil in the same way as gas humidity. The measurements are output as absolute values in [ppm] or relative values as water content [aw].
Oil Measurement Transmitter Products
EE360
EE360-L100D2PC4AM2GA6GB6SBL-20SBH80 (Wired Type )
High-End Moisture in Oil Transmitter
Transmitter for online monitoring of moisture in industrial oils and diesel fuel. The remote probe can be easily installed and removed with the optional ball valve.
EE381
Compact Moisture in Oil Sensor
Highly accurate and long term stable measurement in lubrication, hydraulic and insulation oils, as well as in diesel fuel.
EE364
Compact Moisture in Oil Transmitter
Compact and rugged inline moisture in oil transmitter with high accuracy and excellent long-term stability.
EE300Ex
Humidity and temperature transmitter for intrinsically safe applications
Measurement of humidity and temperature in explosion hazard areas for gas and dust. It complies with the classifications for Europe (ATEX), International (IECEx) and USA / Canada (FM).
Hand-Held Moisture in Oil Meter
Mobile measurement of moisture in oil. Moisture content in [ppm] or expressed as water activity [aw]
Hand-Held Meter for Moisture in Oil
Oil Measurement Hand-held Products
Oilport 30 Set
Handheld meter for moisture in oil measurement
For moisture measurement in mineral and synthetic oils. The probe can be installed and removed without interrupting the process using the optional ball valve set.
E+E Elektronik CO2 Measurement
Product range
CO2 Transmitters
Room, wall and duct mount CO2 sensors for demand controlled ventilation and process control. Available also with additional humidity and temperature outputs.
CO2 Sensors and Transmitters for Demand Controlled Ventilation
Based on the dual wavelength NDIR technology, the CO2 sensors and transmitters from E+E Elektronik compensate for ageing effects and offer outstanding long term performance even in continuous populated spaces.
Due to high insensitivity to pollution and outstanding temperature compensation, E+E CO2 transmitters can be used in demanding applications such as agriculture, hatchers, incubators, greenhouses or life stock barns.
CO2 Transmitter Products
EE8915
CO2 Sensor for Railway Applications
EE8915 complies with all relevant railway standards. It features dual wavelength NDIR principle, autocalibration, pressure and temperature compensation with on-board sensors.
EE800
CO2, temperature and humidity room transmitter
Dual wavelength NDIR CO2 measurement principle with outstanding temperature compensation and long term stability. High end E+E capacitive humidity sensor. Elegant snap-on enclosure with optional display, BACnet, Modbus or analogue outputs, optional passive T sensor.
EE820
CO2 sensor for demanding applications
EE820 is optimized for hatchers, incubators, green houses or life stock barns. Analogue output or RS485 interface with Modbus RTU or BACnet protocol.
EE850
CO2, RH and T duct mount sensor
The multi-parameter EE850 sensor is ideal for demand controlled ventilation and building automation. It features analogue outputs or RS485 interface with Modbus RTU or BACnet MS/TP protocol.
CO2 Modules and Probes
Compact, user configurable, temperature and pressure compensation, long term stable, low power consumption.
CO2 Sensors from E+E Elektronik are designed for demand controlled ventilation and for process control. Based on the dual wavelength NDIR technology, they compensate for ageing effects, are highly insensitive to pollution and offer outstanding temperature compensation and long term performance.
Low power consumption allows also for use in battery operated devices.
CO2 Sensor Products
EE895
Miniature-Sensor Module for CO2, Temperature and Barometric Pressure
The ideal sensor module for building automation and process control. The unique pressure compensation assures best-in-class CO2 measurement performance. The miniature sensor module can be easily integrated.
EE872
EE872 Modular 4 in 1 probe for CO2, humidity, temperature and pressure
For reliable measurement of CO2 concentration, relative humidity, temperature and ambient pressure. The heated versions of the EE872 are suitable for high humidity, condensing environment.
EE894
CO2 Module Measures Four Climate Parameters
Digital measurement module for carbon dioxide (CO2), relative humidity (RH), temperature (T) and ambient pressure (p). The plug-on module is dedicated for climate monitoring devices.
CO2 Switches
Room, wall and duct mount CO2 switches for demand controlled ventilation and process control.
CO2 switches for Demand Controlled Ventilation
Based on the dual wavelength NDIR technology, the CO2 switches from E+E Elektronik compensate for ageing effects and offer outstanding long term performance even in continuous populated spaces.
Due to high insensitivity to pollution and outstanding temperature compensation, E+E CO2 switches can be used in demanding applications such as agriculture, hatchers, incubators, greenhouses or life stock barns.
CO2 Switches Products
EE80
Room CO2 Switch
CO2 measurement in an elegant enclosure with optional display, for demand controlled ventilation.
EE82
CO2 Switch for harsh environment
Robust housing with integrated dust and dirt filter to protect against environmental influences. A CO2 switch for demanding climate control.
EE85
Duct mount CO2 Switch
Measurement of the CO2 concentration in ventilation ducts. The ideal CO2 switch for building automation and demand controlled ventilation.
CO2 Data Logger
Accurate recording of CO2 concentration along with humidity, temperature, pressure and electrical signals.
Data Logger for CO2, Humidity and Temperature
CO2 Data Logger Products
Omniport 30
Multifunctional hand-held meter
Hand-held meter with interchangeable digital probes for accurate measurement of humidity, temperature, CO2, air velocity and volumetric flow.
Humlog 20
Data logger for humidity, temperature, air pressure and CO2
Data logger for humidity, temperature, air pressure and CO2 concentration optimised for indoor climate monitoring.
Humlog 20 E
Data logger for external sensors
Data logger with analogue and digital inputs for humidity, temperature, current, Voltage, Pt100, thermocouple. Network-compatible by built in Ethernet interface.
CO2 Hand-held Meter
Portable measurement of CO2, humidity, temperature and air velocity with interchangeable probes and data logging feature.
Hand-held transmitter for CO2
CO2 Hand-held Products
Omniport 30
Multifunctional hand-held meter
Hand-held meter with interchangeable digital probes for accurate measurement of humidity, temperature, CO2, air velocity and volumetric flow.
Wireless CO2 Sensors
High quality wireless transmitters for CO2, humidity and temperature measurement.
The wireless CO2 transmitters EE244 and EE245 combine state-of-the-art sensor technology with excellent transmission reliability. The wireless network is very easy to set up via web server and can contain up to 500 wireless transmitters.
CO2 Wireless Products
EE245
Room wireless transmitter for temperature, humidity and CO2
IEEE 802.15.4 protocol, 2.4GHz, 1000m open field range. Dual wavelength NDIR CO2 measurement principle, outstanding temperature compensation and long term stability. High end E+E capacitive humidity sensor. Snap-on, stylish enclosure.
EE244
Modular Wireless Transmitter for Temperature, Humidity and CO2
IEEE 802.15.4 protocol, 2.4GHz, 1000m open field range. In a robust enclosure with external antenna and optional display, EE244 accomodates up to three pluggable, interchangeable probes for temperature, humidity and CO2.
EE242
Base Station
For a network of up to 500 wireless transmitters EE244 and EE245. Setup of the wireless network via web server. The measured data is available on the Ethernet, Modbus RTU and TCP/IP, and analogue outputs as well as on the optional display.
E+E Elektronik Air Velocity Measurement
Product range
Air Flow Transmitters and Probes
Dedicated for process control, building automation, clean rooms or laminar flow control.
Air Flow Sensors / Transmitters for Air Velocity
Transmitters for measuring air velocity / flow in building automation, pharmaceutical applications or clean rooms. Excellent long-term stability and reproducibility are guaranteed by the high quality air flow sensors in thin-layer technology.
Air Flow Sensor Products
EE75
High accuracy air flow sensor for industrial applications.
High accuracy measurement of flow and temperature in industrial processes up to 10 bar and 120°C. Also ideal as a reference unit for labs and test rigs.
EE650
Air Flow Sensor for HVAC
Accurate and reliable measurement up to 20m/s (4000 ft/min). Very robust and highly insensitive to pollution. Analogue output or RS485 interface with Modbus or BACnet protocol.
EE660
Sensor for Very Low Air Velocity
Optimised for clean rooms and laminar flow monitoring, with excellent accuracy down to 0.15 m/s (30 ft/min). Analogue outputs or RS485 interface with Modbus or BACnet protocol.
EE671
Compact Air Flow Probe for HVAC
Very robust and highly insensitive to pollution. Measurement range up to 20m/s (4000 ft/min). Voltage or Modbus RTU output.
EE576
Compact air flow probe for very low air velocity
Excellent accuracy down to 0.2 m/s (40 ft/min). Voltage output. Optimized for clean rooms and laminar flow monitoring.
Air Velocity Hand-held Meter
Multifunctional device for HVAC, industrial process, and laminar flow.
Hand-held Meter for Air Velocity
Air Flow Hand-held Products
Omniport 30
Multifunctional hand-held meter
Hand-held meter with interchangeable digital probes for accurate measurement of humidity, temperature, CO2, air velocity and volumetric flow.
E+E Elektronik Flowmeter for Compressed Air and Gases
Product range
Mass Flow Meter for Air and Gas
Thermal mass flow meters for air and gases like oxygen, CO2, nitrogen or helium. Pipe diameter DN15 to DN700.
Flowmeter Products
EE741
Modular, compact in-line flow meter for DN15 to DN50
The modular inline flow meter is dedicated for metering and monitoring of compressed air and technical gases in DN15 to DN50 (1/2" - 2") pipes. Outstanding measuring accuracy due to multi-point factory adjustment at 7 bar (102psi) air pressure.
EE771
Inline mass flow meter DN15 - DN50
The inline mass flow meter for DN15 - DN50 (1/2" - 2") and up to 16 bar (232 psi). The measurement ball valve permits rapid installation and removal with only a short interruption of the flow.
EE772
Inline Mass flow meter DN40 – DN80
Multifunctional inline mass flow meter for DN40 - DN80 (1 1/2" - 3") up to 40 bar (580 psi). Gauge mounting block with hot tap valve for installation and removal without interruption of the flow. Mounting possibility for pressure and dew point sensors.
EE776
Insertion mass flow meter for DN50 - DN700 (2" - 28") and up to 16 bar (232 psi)
Insertion mass flow meter with patented non-return protection for secure mounting. Use in pipelines DN50 up to DN700 (2" to 28"). Installation and removal without interruption of the flow.
Measurement Principle
Thermal mass flow meter for compressed air and gases.
E+E Elektronik Temperature measurement
Transmitters, sensors and hand-held meters for temperature measurement in HVAC and clean room applications.
Product range
HVAC Applications
Temperature sensors with passive and active output for building automation and process control
Temperature sensors for building automation
Temperature sensors with passive and active output for building automation and process control.
Temperature Sensors HVAC Products
EE431
Duct / Immersion Temperature Sensor
Reliable measurement in air and liquids. IP65/NEMA 4 enclosure, analogue or passive output, Modbus RTU or BACnet MS/TP.
EE441
Strap-on Temperature Sensor
Reliable measurement on round ducts and pipes. IP65/NEMA 4 enclosure, analogue or passive output, Modbus RTU or BACnet MS/TP.
EE451
Wall Mounted Temperature Sensor
Reliable measurement indoors and outdoors. IP65/NEMA 4 enclosure, analogue or passive output, Modbus RTU or BACnet MS/TP.
EE461/EE462/EE432
Cable Temperature Sensor
Ideal for both HVAC systems and process control in gases and, with immersion well, in liquids.
EE471
Temperature Sensor with Remote Probe
Reliable measurement in applications with space restrictions. IP65/NEMA 4 enclosure, analogue or passive output, Modbus RTU or BACnet MS/TP.
EE10-T
Room Temperature Sensor
Analog, Modbus, BACnet or passive output in an elegant, easy to install enclosure. Ideal for residential and commercial building automation.
Industrial Applications
Temperature sensors for industrial processes and demanding climate control
Temperature Sensors for Industrial Applications
Precise measurement of temperature in industrial applications.
Temperature Sensors for Industrial Applications Products
EE300Ex-M3
Intrinsically Safe Temperature Transmitter
Measurement of temperature in explosion hazard areas for gas and dust. It complies with the classifications for Europe (ATEX), International (IECEx) and USA / Canada (FM).
EE220
Humidity and Temperature Transmitter with Interchangeable Probes
The intelligent probes can be mounted directly onto the transmitter or remotely by cable. Ideal for FDA required loop calibration in pharmaceutical and biotech industries.
EE074
Temperature Probe with Modbus RTU
Measures accurately the temperature of air, gases and liquids. The probe features a RS485 interface with Modbus RTU protocol.
Hand-Held Meters
logging function, large display and intelligent probes for humidity, CO2, air velocity and temperature.
Hand-held temperature meters
Temperature Handheld Products
Omniport 30
Multifunctional hand-held meter
Hand-held meter with interchangeable digital probes for accurate measurement of humidity, temperature, CO2, air velocity and volumetric flow.
Wireless Temperature Sensors
High quality wireless transmitters for temperature, CO2 and humidity measurement.
Wireless Temperature Sensors
The wireless temperature and humidity transmitters EE244 and EE245 combine state-of-the-art sensor technology with excellent transmission reliability. The wireless network is very easy to set up via web server and can contain up to 500 wireless transmitters.
Temperature Wireless Products
EE245
Room wireless transmitter for temperature, humidity and CO2
IEEE 802.15.4 protocol, 2.4GHz, 1000m open field range. Dual wavelength NDIR CO2 measurement principle, outstanding temperature compensation and long term stability. High end E+E capacitive humidity sensor. Snap-on, stylish enclosure.
EE244
Modular Wireless Transmitter for Temperature, Humidity and CO2
IEEE 802.15.4 protocol, 2.4GHz, 1000m open field range. In a robust enclosure with external antenna and optional display, EE244 accomodates up to three pluggable, interchangeable probes for temperature, humidity and CO2.
EE242
Base Station
For a network of up to 500 wireless transmitters EE244 and EE245. Setup of the wireless network via web server. The measured data is available on the Ethernet, Modbus RTU and TCP/IP, and analogue outputs as well as on the optional display.
E+E Elektronik Pressure measurement
E+E differential pressure sensors are suitable for applications in HVAC and building automation, clean rooms, hospitals, laboratories, isolation chambers or in the pharmaceutical industry. The highly accurate devices can be employed for all non-flammable and non-aggressive gases. The piezo-resistive pressure sensing element stands out by excellent long-term stability, measures even minimal pressure differences and excludes the risk of cross-contamination.
Differential Pressure Sensors
The multi-range differential pressure sensors EE600 and EE610 stand out by a high accuracy of +/- 0.5 % of the full scale 100 Pa, 1,000 Pa and 10,000 Pa.
Pressure measurement
E+E differential pressure sensors are suitable for applications in HVAC and building automation, clean rooms, hospitals, laboratories, isolation chambers or in the pharmaceutical industry. The highly accurate devices can be employed for all non-flammable and non-aggressive gases. The piezo-resistive pressure sensing element stands out by excellent long-term stability, measures even minimal pressure differences and excludes the risk of cross-contamination.
Differential Pressure Sensors
The multi-range differential pressure sensors EE600 and EE610 stand out by a high accuracy of +/- 0.5 % of the full scale 100 Pa, 1,000 Pa and 10,000 Pa.
E+E Elektronik Measuring Instrument Calibration in the Accredited E+E Calibration Laboratory
Measuring equipment monitoring plays a central role in modern, automated production processes. If measuring instruments do not deliver the required accuracy, this endangers a smooth process flow, safety and also the quality of the end product. For this reason, regular calibration of the used measuring instruments is an essential part of most quality assurance systems. The accredited E+E Elektronik calibration laboratory offers calibration services for measuring instruments. The calibration certificates issued confirm the traceability of the measured values to the national standard to comply with globally recognised standards.
Calibration in the Accredited Laboratory
The calibration laboratory operated by E+E Elektronik GmbH is accredited by Akkreditierung Austria/Federal Ministry for Digital and Economic Affairs (Bundesministerium für Digitalisierung und Wirtschaftsstandort) according to EN ISO/IEC 17025 under the identification number 0608. The E+E Calibration Service includes manufacturer-independent measuring instrument calibrations for the measurands:
-
Humidity
-
Dew Point
-
CO2
-
Air Velocity
-
Mass Flow
-
Temperature
-
Pressure
EE355-PA1
EE99-1-FP6AD8025
EE072-HS1TT2F2J3
Humidity and Temperature Probe
Housing: Polycarbonate
Temperature: -40…80 °C
Humidity: 0…100%
Filter: Membrane Polycarbonate Body
Digital Interface: Modbus RTU
EE431-M3J3L65P1BD5
Humidity and Temperature Probe
Housing: Polycarbonate
Temperature: -40…80 °C
Humidity: 0…100%
Filter: Membrane Polycarbonate Body
Digital Interface: Modbus RTU
HA400111
Immersion Well: ½” Npt 50 Mm, Brass
HA010819
Connection Cable 5 pin M12 Socket
HA010502
Radiation Shield
HA401101
Plastic Connection Flange
EE431-M7TP4L65
Channel Type Temperature Sensor
Temperature: Passive
T sensor: Pt1000 DIN B
Probe length: 65 mm
Türkiyede E+E Elektronik ile ilgili uygun rekabetçi fiyatları almak için müşteri temsilcimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış mühendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.