Gicam Bending beam load cell

Gicam Tension load cell

Mounting of Tension load cell: The tension load cell must be attached to a sufficiently rigid structure and must be mounted in such a way as to support the load on vertical axis

Gicam Universal load cell

Gicam Universal load cells GD5

Gicam Universal load cells GD4VIS

Gicam Universal load cells ME8GE

Gicam Universal load cells OM2

Gicam Special application

Gicam Special application MA-LC MA-LCM

Gicam Special application M/G FX

Gicam Special application GR01

Gicam Special application PL750

Gicam Shear beam load cell

Mounting of Flexion or Shear Beam load cell: For flexing or shear beam load cell considerations must be made for mounting of the load cell by compression. A mounting accessory is available that performs the function of absorbing the lateral thrusts, shocks and vibrations

Gicam Flange load cell

Flange load cells for fire control equipment for the textile, paper, plastic film, rubber, leather etc..

Gicam Double shear load cell

Mounting of Double Shear Beam load cell: Fix the cells using screws or bolts with adequate mechanical strength. The load must be perpendicular to the point of application

Gicam Accessories

Mounting accessories, allowing easy use of compression, bending, shear cells, providing the ideal solution in order to concentrate the weight on the load cell.

Gicam Mounting accessories ACME2

Gicam Mounting accessories ACME3

Gicam Mounting accessories ACME4

Gicam Mounting accessories ACTS5

Gicam Mounting accessories ACTS7

Gicam Mounting accessories ACTS6

Gicam Mounting accessories ACTS8

Gicam Mounting accessories PIASTRA ACTS6

Gicam Mounting accessories ACGS-1a max. 200 kg

Gicam Mounting accessories ACGS1 max 300 kg

Gicam Mounting accessories ACGS1 1t

Gicam Mounting accessories ACGS1 1t - 2t

Gicam Mounting accessories Cappello ME

Gicam Mounting accessories Piastra Fondo ME

Gicam Mounting accessories Junction Box

Gicam Mounting accessories SG4C

Gicam Mounting accessories SG8C

Gicam Mounting accessories SG8CL

Gicam Mounting accessories Grilli

Gicam Mounting accessories Uniball

Gicam Mounting accessories Puffer A

Gicam Mounting accessories Puffer B

Gicam Mounting accessories Puffer C

Gicam Mounting accessories PAN-CENT

Gicam Off-center load cell

Mounting of Off-center load cell: Position the anti-overload mechanical stops under the load cell and in the corners of the structure bearing in mind that in the corners the weight applicable is 1/3 of the nominal load

Gicam Compression load cell

In systems with cells in tension the upper and lower attachment must not be subject to twisting (rotation) and should be as far as possible aligned with the force to be measured. In systems with compression load cells the supporting base serves to give the reaction and rigidity to the applied force, while the upper plate compensates within certain limits (approximately 1 mm/meter) any non-verticality of the load and/or differences of parallelism between the two upper and lower plates.
For compression load cells the best way is to have a perfect verticality of the load in order to achieve a perfect parallelism and horizontality between the ground plane of the load cell and weighing surface structure
Mounting of Compression load cell:The supporting plane the load cell must be perfectly horizontal and coplanar. The structure must be sufficiently rigid to maintain the horizontality of assembling plane

Gicam Pin load cell

Pin load cells for pulleys, hoists, cranes, tanks and weighing equipment, overhead cranes etc..

Gicam Geotechnical load cells

Gicam Transmitter

Weight Transmitters with direct connection of one ore more load cells and a wide range of outputs for an easy integration in every industrial and automation system. Comfortable and immediate installation on DIN bar and/or OMEGA bar.

Gicam Weight Transmitters RQA

Gicam weight indicators are weight indicator devices connected to load cells. We have multifunction displayers for weighing and dosing, for bridge weighing, with load limiter. Portable displayers are available in comfortable briefcases. We have panel mounting, portable, DIN and OMEGA bar mounts, analog indicators and touch screens indicators. IP65 products are available with dust protection. Gicam indicators support industrial communication protocols like PROFIBUS, PROFINET, MODBUS and more.

Gicam weight indicator RQ

Gicam repeaters can receive data from RS232, RS485, RF 868 MHz lines. They can read up to 6 characters in its digital display and theirheight is till 160 mm. Their brightness is adjustable automatically and is perfect for outdoor installations. The case is made of stainless steel and the connections are completely watertight. It can be directly connected to all production instruments. The customization and configuration can be made through PC software.

GICAM sells various types of signal converter. We have signal converters that transmit serial protocols by radio frequencies, very simple to program and control. Our converters are suitable for use in industry. We offer signal converters that transform analog input signals into standardized analog signals, and signal converters that can be connected to devices that have RS-485 or RS-422 protocols.

Gicam Weighing Systems CRL PRESS LOAD

Türkiyede Gicam ürünleri ile ilgili  uygun rekabetçi fiyatları almak için müşteri temsilcimiz ile  http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu  doldurarak mesaj bırakmanız halinde satış mühendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.