Chemical and Process Pumps

---

Models KCP K
Covers 8 models with following unique features:
Shaft seal 35,445 length ,one coupling bore 22 one Dimensions for end of suction face
 to center line of discharge 102 mm. one shaft height 135mm, one spacer coupling100 mm
one packing size 8mmMax. BKW 23/2900 RPM.
Models KCP M
Covers 10 models with following unique features:
Shaft seal 45mm, 445 length ,one length 615 up to 6” suction size. Coupling bore 32mm
& 42 mm, flange face to center of casing 102 & 150 Max. BKW 70/2900 RPM discharge.
Models KCP G
Covers 8 models , shafts seal sizes 55.0 & 65.0 ,coupling bore 48 & 60.0
Range of application: 
General : Pharmaceutical ,Pollution control, Textile , food condensate, return, sulfuric 
acid circulation, Stack scrubbers, Filter press feed.
Chemicals: Caustics transfer, Acid unloading ,Monomer & Polymer transfer & urea,
liquid ammonia & liquid nitrogen.
Primary Metals: Waste Acid recovery, Pickle liquor circulation.
Petrochemical: Aromatics, NGL, LPG light & reflex tower bottom, Hydrocarbon gas, oil.
Pulp & Paper: Digester make up, Black Liquor recovery, white liquor , Coating slurries.
Special designed R/Led pumps for priming systems for effluent neutralizing & disposal.
Range of temperature:
-200 Degree. C to 180 Degree. C
Range of pressure:
Q= 2 (M)3/H to 1800(M)3/H
Range of Flow:
Q= 2 (M)3/H to 1800(M)3/H
Design:
Features:

• Back pull out construction with spacer couplings for rapid assembly & 
  dis- assembly on line.
• Fully open impeller with partial shrouds.
  Standard Dimensions/maximum pump & parts interchangeability.
• Low noise level due to fundamental design restrictions on impeller &
  volute cut water clearance.
• Impeller designed on finite element rotational stresses analysis, to explore to give 
  a light sturdy Impeller .
• Heavy duty construction.
• External impeller adjustment.
• Hook type shaft sleeve.
• Normal or reinforced shaft & bearings.
• Shaft Designed for overhung concept having first critical speed of rotation , 
  maximum deflection of shaft 0.05 mm at stuffing box face.

Models KCP K
Covers 8 models with following unique features:
Shaft seal 35,445 length ,one coupling bore 22 one Dimensions for end of suction face
 to center line of discharge 102 mm. one shaft height 135mm, one spacer coupling100 mm
one packing size 8mmMax. BKW 23/2900 RPM.
Models KCP M
Covers 10 models with following unique features:
Shaft seal 45mm, 445 length ,one length 615 up to 6” suction size. Coupling bore 32mm
& 42 mm, flange face to center of casing 102 & 150 Max. BKW 70/2900 RPM discharge.
Models KCP G
Covers 8 models , shafts seal sizes 55.0 & 65.0 ,coupling bore 48 & 60.0
Range of application: 
General : Pharmaceutical ,Pollution control, Textile , food condensate, return, sulfuric 
acid circulation, Stack scrubbers, Filter press feed.
Chemicals: Caustics transfer, Acid unloading ,Monomer & Polymer transfer & urea,
liquid ammonia & liquid nitrogen.
Primary Metals: Waste Acid recovery, Pickle liquor circulation.
Petrochemical: Aromatics, NGL, LPG light & reflex tower bottom, Hydrocarbon gas, oil.
Pulp & Paper: Digester make up, Black Liquor recovery, white liquor , Coating slurries.
Special designed R/Led pumps for priming systems for effluent neutralizing & disposal.
Range of temperature:
-200 Degree. C to 180 Degree. C
Range of pressure:
Q= 2 (M)3/H to 1800(M)3/H
Range of Flow:
Q= 2 (M)3/H to 1800(M)3/H

Design:
Features:

• Back pull out construction with spacer couplings for rapid assembly & 
  dis- assembly on line.
• Fully open impeller with partial shrouds.
  Standard Dimensions/maximum pump & parts interchangeability.
• Low noise level due to fundamental design restrictions on impeller &
  volute cut water clearance.
• Impeller designed on finite element rotational stresses analysis, to explore to give 
  a light sturdy Impeller .
• Heavy duty construction.
• External impeller adjustment.
• Hook type shaft sleeve.
• Normal or reinforced shaft & bearings.
• Shaft Designed for overhung concept having first critical speed of rotation , 
  maximum deflection of shaft 0.05 mm at stuffing box face.

Models:
Flexible Shaft Design:
KCPVK UPTO 23 BKW/2900 RPM
KCPVM UPTO 30 BKW/1450 RPM
KCPVG upto 90 BKW/1450 RPM
RIGID SHAFT DESIGN

KCPV C/L:

Range of Applications:
A) For flexible shaft design upto 5  Mtrs depth available for higher  Suspension - depth 
consult the Factory.

Industrial Sump drainage:
Corrosive & Non-Corrosive liquids Toxic liquids (Costly liquids like ethanol, methanol
Chloroform, Acetone & lubricating oils Pollution control, Molten sulphur.

KCPV C/L:
B) Cantilever design- slurry Pumps

No submerged bearings hence S.D. upto Depending upon first critical speed.

• Mill scale
• Waste paper stock
• Sludge Coal Slurry
• Black liquor

Range of temperature: 
-100 degree upto 250 degree.
Range of pressures: 
Heads upto 10.0 Kg/Cm.

• Plant Waste
• Food Pulp
• Sewage treatment
• Wash down water
• Molen Salts
• Ash Slurry

Range of Pressure: 
Head upto 3.8 kg (cm)2.
Pit depths up to 2mtr
Solids upto 5 inch (125mm).

Design:
Features:

Self priming

• No separate foundation required for mounting. Can be mounted on man hole vessel.
• External impeller adjustment - double row angular contact or spherical thrust bearing.
• Heavy Duty , Solid Shaft - one pc. In case of cantilever.
• No. Stuffing box leakage, hence no mechanical seal required, unless in special cases
   of toxic liquids.
• For line Shaft bearings provide full length shaft stability.
   1.Size for high PV loads & hence long bearing life.
   2.Spaced so that first critical speed is i.e., 1.3/1.5 times working speed.
   3.Machined spigot fits aligns pump column permanently.
   4.Pump lengths altered by changing  Pump Shaft & Column components. 
   5.Line bearings of glass filled Teflon & Carbon filled Teflon against smooth shaft 
      sleeves & shaft available.
   6.Column of steel , lined with rubber , & reinforced fiber glass.

Models:
Flexible Shaft Design:
KCPVK UPTO 23 BKW/2900 RPM
KCPVM UPTO 30 BKW/1450 RPM
KCPVG upto 90 BKW/1450 RPM
RIGID SHAFT DESIGN

KCPV C/L:

Range of Applications:
A) For flexible shaft design upto 5  Mtrs depth available for higher  Suspension - depth 
consult the Factory.

Industrial Sump drainage:
Corrosive & Non-Corrosive liquids Toxic liquids (Costly liquids like ethanol, methanol
Chloroform, Acetone & lubricating oils Pollution control, Molten sulphur.

KCPV C/L:
B) Cantilever design- slurry Pumps

No submerged bearings hence S.D. upto Depending upon first critical speed.

• Mill scale
• Waste paper stock
• Sludge Coal Slurry
• Black liquor

Range of temperature: 
-100 degree upto 250 degree.
Range of pressures: 
Heads upto 10.0 Kg/Cm.

• Plant Waste
• Food Pulp
• Sewage treatment
• Wash down water
• Molen Salts
• Ash Slurry

Range of Pressure: 
Head upto 3.8 kg (cm)2.
Pit depths up to 2mtr
Solids upto 5 inch (125mm).

Design:
Features:

Self priming

• No separate foundation required for mounting. Can be mounted on man hole vessel.
• External impeller adjustment - double row angular contact or spherical thrust bearing.
• Heavy Duty , Solid Shaft - one pc. In case of cantilever.
• No. Stuffing box leakage, hence no mechanical seal required, unless in special cases
   of toxic liquids.
• For line Shaft bearings provide full length shaft stability.
   1.Size for high PV loads & hence long bearing life.
   2.Spaced so that first critical speed is i.e., 1.3/1.5 times working speed.
   3.Machined spigot fits aligns pump column permanently.
   4.Pump lengths altered by changing  Pump Shaft & Column components. 
   5.Line bearings of glass filled Teflon & Carbon filled Teflon against smooth shaft 
      sleeves & shaft available.
   6.Column of steel , lined with rubber , & reinforced fiber glass.

     Axial Flow Pump

DESIGNED FOR CIRCULATION OF CORROSIVE / ABRASIVE & PROCESS SOLUTIONS

Range of Application:
Model KAF & KAFV Series 5",6",8",10",12",14",16",18" ,20"

Chemical: Forced evaporator & Crystallizer circulation
Paper: Black Liquor concentration , Xylene Crystallizer.
Food: Cane , Maize , Sugar evaporator.
Municipal: Sewage sludge circulation, sewage disposal.
General: Raw water pumping.

Range of Temperature: 
Upto 200 degree C

Range of Pressure:
Upto 10.5 Kg/(cm)2

Range of Flow:
Upto 3500 (m)3/hr
Heads:
Upto 9 mtrs.
Design:
Features:

• Back pull out design  coupling with spacer element  for rapid dismantling & assembly
  with propeller & sealing element..
• Stuffing box housing designed with jacketing arrangement for cooling or heating.
• Stuffing box chamber matches the elbow design of casing, so that smooth flow with 
  minimum losses take place, The K factor for calculating losses across the elbow does
  not exceed 0.1 to 0.3
• Available in horizontal single elbow, vertical cantilever  & special design as required.
• Pumps can be furnished with either clockwise or counter clockwise direction of rotation
  looking from motor end.
• Direction of flow reversible, The discharge flange can be suction for liquid in which case
  the impeller is reversed end for end, resulting in suction pressure of rotation looking
  from motor end. 

Range of Application:
Model KAF & KAFV Series 5",6",8",10",12",14",16",18" ,20"
Chemical: Forced evaporator & Crystallizer circulation
Paper: Black Liquor concentration , Xylene Crystallizer.
Food: Cane , Maize , Sugar evaporator.
Municipal: Sewage sludge circulation, sewage disposal.
General: Raw water pumping.
Range of Temperature: 
Upto 200 degree C
Range of Pressure:
Upto 10.5 Kg/(cm)2
Range of Flow:
Upto 3500 (m)3/hr
Heads:
Upto 9 mtrs.
Design:
Features:

• Back pull out design  coupling with spacer element  for rapid dismantling & assembly
  with propeller & sealing element..
• Stuffing box housing designed with jacketing arrangement for cooling or heating.
• Stuffing box chamber matches the elbow design of casing, so that smooth flow with 
  minimum losses take place, The K factor for calculating losses across the elbow does
  not exceed 0.1 to 0.3
• Available in horizontal single elbow, vertical cantilever  & special design as required.
• Pumps can be furnished with either clockwise or counter clockwise direction of rotation
  looking from motor end.
• Direction of flow reversible, The discharge flange can be suction for liquid in which case
  the impeller is reversed end for end, resulting in suction pressure of rotation looking
  from motor end. 
•  
• Marine Pumps

The Kreisel pumps is a single stage Vertical Centrifugal pump for use in marine
and in oil fields .It is designed to handle seawater ,hydrocarbons light viscosity oils.

We have designed two types 

• Self priming which has a vacuum pump on the same shaft behind the main impeller.
• Non Self priming

Design:
Features:

Robust pumps easily installed and during maintenance the main wearing components
easily accessible . The shafts are located by choice at the upper bearings, because 
greater stability is obtained by supporting rotating mass at a point above its center of 
gravity .No shaft sleeves ,hence shafts reinforced so that first critical speed is almost 
1.35(minimum) above working speed resulting in smooth and quite operation of pumps. 

 

The Kreisel pumps is a single stage Vertical Centrifugal pump for use in marine
and in oil fields .It is designed to handle seawater ,hydrocarbons light viscosity oils.

We have designed two types 

• Self priming which has a vacuum pump on the same shaft behind the main impeller.
• Non Self priming

Design:
Features:

Robust pumps easily installed and during maintenance the main wearing components
easily accessible . The shafts are located by choice at the upper bearings, because 
greater stability is obtained by supporting rotating mass at a point above its center of 
gravity .No shaft sleeves ,hence shafts reinforced so that first critical speed is almost 
1.35(minimum) above working speed resulting in smooth and quite operation of pumps

Submersible   Sewage  Pumps

Kreisel Submersible Sewage pumps are
equipped with the exclusive submersion
detector probe in the seal chamber, should
the lower seal leak, allowing water into the
seal chamber, the probe activates  warning
allows time to repair the pump seal before
water enters  the motor. 
Technical Features:
The single & two-vane impeller has a non-clog
design that passes heavy sludge and solid bits.
The throughway is long with no acute turns.
Despite the compromises inherent in such 
"Open" design,thick and thin fluids are efficiently pumped.

TRISHEAR COLLOID MILL

TRISHEAR MILL operates in a much wider range
of Viscosities than other homogenising & colloid mills,
with supplementary agitation it can handle several 
hundred thousand centipoises. You can produce far
more through-put too - without paying a stiff penalty
in energy costs and maintenance.

How Does a TRISHEAR MILL work?
The machines are designed to be very tough and 
highly accurate, whereby very close tolerance
between the rotor and stator generates a high degree
of mechanical shear. This cutting action breaks down
droplets to sub-micron sizes. The result is an emulsion
that is more uniform and stable. The liquid mix is then 
pumped through the stator and surrounding mill. This
produces intense hydraulic shear which ruptures
remaining droplets & hastens the mixing process. The
main demand of today & tomorrow is better utilisation
of our resources and total elimination of pollution in the environment. These are of special significance in many Industries like :
Cosmetic Industries, Food Industries, Chemical
Industries, Pharmaceutical Industries. 

AXIAL FLOW TURBINE

​  We have developed a portable Vertical / Horizontal new concept of ‘Axial flow water turbine’ for water (for low head Hydro Projects) which should allow it to directly mount an economically viable hydro plant having net head below 5 kg/cm2 - 6 Kg/cm2 max. The concept to undertake such a task was created for most of those involved in the hydro power industry, it has been well known that under normal investment circumstances, development of a hydro power project will run into hundred to thousand of crores of rupees, hence our thought goes for requirement of mini portable 15 to 100 Kilowatts of power output into working in small hydro power