Lion Precision

Product Families

LION PRECISION   Capacitive Sensors - Noncontact displacement sensors for gauging

  • Bandwidth: to 15kHz

  • Resolution: as low as 0.4nm

  • Ranges: 10µm to 10mm

  • Clean, dry environments

  • Conductive targets

  • Nonconductive targets
    depending on application

  • Best for high-speed, moving targets

LION PRECISION  Eddy-Current Sensors - Noncontact displacement sensors for gauging

  • Bandwidth: to 80kHz

  • Resolution: as low as 20nm

  • Ranges: 0.5mm to 15mm

  • Wet, hostile environments

  • Conductive targets
    (ferrous and nonferrous )

Compare Eddy Current and Capacitive Sensors

LION PRECISION  Label Sensors - High-speed sensors for label registration and splice detection

  • Accuracy: to 1/128 inch

  • Switch Freq.: up to 10kHz

  • Response Time: to 20µs

  • Clear labels

  • Metal Labels

  • Foil stamp labels

  • Capacitive, Ultrasonic, Optical

LION PRECISION  Spindle Error Analysis - Machine tool spindle health and preformance testing

  • 5 and 3 sensor systems

  • State-of-the-art analysis software

  • Thermal and Error Motion measurements

  • Synchronous error motion

  • Asynchronous error motion

  • Tilt

  • Temperature stability

  • FFT analysis

LION PRECISION  Targa III - Dynamic Runout System for high-speed spindles

  • PCB Drill Spindles

  • Disk Drive Spindles

  • Automatic Dynamic Runout Display

  • Elite Series Sensors

  • Sensors Plug&Play

LION PRECISION ThreadSense - Eddy-Current thread detection sensors

  • Nonferrous Materials

  • Ferrous Materials

  • Tapped Threads

  • Roll-Formed Thread

  • M6x1 - M16x2

  • 1/4-20 - 5/8 - 18

  • Custom Thread Sizes Available

LION PRECISIONC  ustom Solutions - Noncontact solutions for your application

  • Probe shapes

  • Probe sizes

  • Complete systems

  • Disk drive

  • Machine tools

  • Thickness measurement

  • Double-sheet detection

  • In-process measurement

  • In-die sensing

 

 

Lion Precision / Capacitive Sensor

 

Lion Precision Elite Series Capacitive Sensors and Systems

Lion Precision Capacitive Sensor: Elite Series CPL190 Single-Range Driver

 

  • Ranges Available: 10 µm to 6 mm

  • ±10 V Output

  • 15 kHz Bandwidth

  • 0.004% Resolution @ 15 kHz (RMS) (Probe/Range dependent, see range chart for details)

  • User selectable bandwidth filters for even higher resolutions (100 Hz, 1 kHz, 10 kHz)

  • Small phase shift - excellent for servo applications

  • Coarse/Fine Adjustable Zero

  • Zero Adjust Disable

  • Visual Range Indicator

 

Kapasitif Sensör: Elite Serisi CPL290 Dual-Range/Sensitivity

  • Aralıkları mevcuttur: 10 mikron için 6 mm

  • Değiştirilebilir Dual-Range/Sensitivity

  • ± 10 V Çıkış

  • 15 kHz Bant Genişliği

  • % 0.004 Çözünürlük @ 15 kHz (RMS) (Probe / Range bağımlı, bkz aralığı grafiğin Detaylar için)

  • daha yüksek çözünürlükler için Kullanıcı seçimli bant filtreleri (100 Hz, 1 kHz, 10 kHz)

  • Küçük faz - servo uygulamaları için mükemmel

  • Kaba / İnce Ayarlanabilir Sıfır

  • Sıfır sakatlar ayarlayın

  • Visual Range Göstergesi

 

Lion Precision TMP190: Seven Channel Temperature Sensor & Encoder/Index Module

  • Up to Seven Temperature Sensors

  • Index Pulse Input

  • Rotary Encoder Input: 
    Differential or Single-Ended

  • Index/Encoder Activity Indicators

  • Computer Controlled 

The TMP190 is used primarily with the Lion Precision Spindle Error Analyzer. In this application it monitors temperature in various locations of a machine tool while the spindle is tested for error motions. Inputs for encoder pulses and index pulses are processed on board and used by a computer to synchronize readings to specific angular locations.

All Eurocard modules are enclosed in 1, 2, 3, 6, or 8 channel systems, depending on number of measurement channels and support modules ordered.

Lion Precision Elite Series MM190: Signal Processing and Meter Module

 

  • Bright Display of Dimensional Units

  • Inch or MM Display Selection

  • Two-Channel Signal Summing

  • Peak Capture Functions
    - Maximum
    - Minimum
    - TIR
    - Tracking TIR

  • Processed Signal Voltage Output 

All Eurocard modules are enclosed in 1, 2, 3, 6, or 8 channel systems, depending on number of measurement channels and support modules ordered

Lion Precision Elite Series Enclosures

 

  • 1-, 2-, 3-, 6-, and 8-Slot Versions

  • Integral Power Supply in
    6-, and 8-Slot

  • External Power Supply included
    with 1-, 2-, and 3-Slot

  • Tilt/Handle with Six and Eight Slot

  • Easy Connection to National Instruments
    Data Acquisition Hardware with integral connector and Virtual Instrument Drivers

  • Convenient Ground Connections

  • TEDS enabled

Lion Precision Capacitive Sensor: Compact Driver Multi-Channel Driver

  • Up to Six Channels

  • Ranges Available: 25 µm to 2.5 mm

  • ±10 V Output

  • 15 kHz Bandwidth

  • 0.008% Resolution @ 15 kHz (RMS) (Probe/Range dependent, see range chart for details)

  • Individually calibrated for maximum performance

  • No User Adjustments

  • Differential and Single-Ended Outputs

  • Small Size, High Density Package

  • OEM and Embedded Applications

  • Separate Power and Signal "D" Connectors

  • ±15 VDC Power

Lion Precision Capacitive Sensor: PM755 Precision Analog Proximity Switch

  • Ranges Available: 10 µm - 6 mm

  • 15 kHz Bandwidth

  • 0.03% Resolution @ 15 kHz (RMS)

  • Coarse/Fine Adjustable Zero

  • User Selectable Output:
    ±10V Nonlinear Analog Voltage, or
    Digital Switched Output (Switches when output crosses zero)

  • Adjustable Gain and Zero

  • With or Without Steel Case

  • Stack for Multiple Channels

  • Factory Calibration Available

Lion Precision Air-Bearing C-LVDT (Capacitive LVDT)

Uses an internal capacitive sensor to create a high-performance, LVDT-like contact measurement system.

  • Same high performance as capacitive sensors

  • Friction-Free air-bearing design

  • Minimal side-loading effects

  • Adjustable down-force as low as 0.2g

  • Works in hostile environments

  • Retractable tip

  • Replaceable diamond tip

 

Lion Precision The products shown have been superseded by the Elite Series of capacitive sensors and support modules.

 

Lion Precision DMT20/DMT22

Capacitive sensor driver modules. Performance specifications similar to the CPL190 and CPL290.

Manual links below.

Lion Precision FM30

Function Module. Sum and difference of two channels. Four peak capture modes. 
Replaced by the MM190.

Manual links below.

Lion Precision MM1 Meter Module

 

Displays sensor outputs in selectable, dimensional units. Select any channel. 
Replaced by the MM190.

Manual links below.

Lion Precision RD20/RD22 Remote Drivers

DMT20 and DMT22 capacitive sensor modules in small, DC powered enclosures for operation without a modular system. Replaced by the Elite Series.

Manual links below

 

Lion Precision / Eddy-Current Sensors

Lion Precision Eddy-Current Sensor Products Overview

High-performance eddy-current sensors consist of an electronics module and probe which is connected to the module by a cable. These systems are available in different configurations and price points.

The ECL202 Eddy-Current Sensor is our best eddy-current product. Digital technology brings the highest linearity, resolution, and temperature stability. A setpoint switched output allows you to monitor a process and trigger an action when needed. The offset and and setpoint threshold are set with pushbutton controls. The module can be operated with other ECL202 modules and has the option of a rear connector DIN rail bus for multiple modules.

 

The ECL101 is based on analog circuitry and features good performance in both linearity and resolution. The ECL101 can achieve bandwidths as high as 80kHz,making it an excellent choice for high-frequency applications. It includes a screw-adjust offset and voltage and current outputs.

 

The ECA100 is a lower cost eddy-current sensor. The output is nonlinear, but the sensor includes a setpoint switch which can monitor a process and call for action when the process reaches a critical point. It has screw-adjust offset and gain controls so you can optimize this sensor in your application for the best possible performance at a lower cost.

The ECD140 is a digital, high-performance sensor module for National Instrument's CompactRIO and LabVIEW systems. The module plugs into existing CompactRIO systems for simplified addition of displacement sensing to existing control systems. The ECD140 is based on the same design as the ECL202 and has similar performance.

 

The ECA110 is an OEM version of ECA100 for embedded systems. Each PCB is custom designed with your components for your calibrations and requires minimum quantity orders. There are no user adjustments or indicators making it perfect for embedded systems where the sensor is out and sight.

Lion Precision / Label Sensors

 

Label Types

UltraLRD V2: Ultrasonic Label Sensor with Wide Fork for All Label Types

The UltraLRD V2 uses ultrasonic technology to reliably sense every label type including metallic, clear, and low-contrast labels, and features a 4mm (0.16") fork.

  • Solid Foil

  • Hot-Stamp

  • High-Carbon Ink

  • Partial Foil

  • Clear on Clear

  • Paper

This sensor requires a separate, 5-pin, M12 connecting cable (6200-0081).

LRD6110: Capacitive Label Sensor for All Label Types

LRD6110 kapasitif etiket sensörü hislerim etiket türleri: açık, kağıt, metal sanat, metalik mürekkep, folyo, ya da sıcak pullar. Bu aynı zamanda anlamda splices!

  • Hot-Stamp

  • High-Carbon Ink

  • Clear on Clear

  • Opaque Labels

  • Ten-Segment Display for Easy Setup

  • Metal Adjustment Screws

  • Clear Label Sensor

  • Paper Label Sensor

  • Easy setup

  • Two-Year Warranty

RoHS Compliant

LRD2100: Capacitive Label Sensor for Metal-Free Labels (Clear or Paper)

This award winning capacitive clear label sensor features accurate, reliable, stable registration for clear and paper labels.
Adjustments are not required when changing roll stock or environment. 
This clear label sensor is also great for detecting splices! It works great with paper labels too.

For metallic labels or labels with foil-stamp artwork - use the LRD6110.

Ordering:

LRD2100 with attached cable: P014-4663
LRD2100C with M12, 5-pin connector: P014-4664
Cable for LRD2100C: 6200-0080

LRD3100: Precision Label Sensor for Clear & Opaque Labels in Tight Spaces

 

The technology of the original Clear Label Sensor applied to tight spaces. The same stable, reliable, accurate sensing of the LRD2100 repackaged with a separate sensor head to squeeze into smaller areas. 
Also great for detecting splices!

The LRD3100 will not work with metallic labels or labels with foil-stamp artwork - use the LRD6110.

LRD4100: Vertical Label Sensor for Clear & Opaque Label Slitting/Rewinding

A Clear Label Sensor for high-speed counting on slitters rewinders. Vertically mounted for multiple unit operation. Use on drug and other critical label counts during slittling and rewinding. Faster than standard optical sensors AND it works with clear-on-clear labels.

The LRD4100 will not work with metallic labels or labels with foil-stamp artwork.

LionEye2: Optical Label Sensor

The LionEye2 optical sensor provides simplicity and low cost for general label registration - with Lion Precision customer service and reliability.
A two-button interface makes the LionEye2 flexible and easy to use.

Requires M8, 4-pin connecting cable: 6200-0090

The LionEye2 is a replacement for the original LionEye

LRD5100: Tear-Tape Sensor

Tear-tape sensing for overwrap packaging. LRD5100 will sense missing clear or colored tear-tapes in overwrap applications.

  • Clear-on-clear labels

  • Paper labels

  • Adjustments not necessary after initial setup

  • Easy operation

  • Faster than optical sensors

  • Industry standard output

  • Lion Precision reliability

  • Splice Detection

  • Two-Year Warranty

  • CE and RoHS compliant

  • Clear-on-clear labels

  • Limited Access Areas

  • Adjustments not necessary after initial setup

  • Easy operation

  • Faster than optical sensors

  • Industry standard output

  • Lion Precision reliability

  • Splice Detection

  • Two-Year Warranty

  • CE and RoHS compliant

  • Clear-on-clear labels

  • High-Speed Counting

  • Slitters and Rewinders

  • Faster than optical sensors

  • Industry standard output

  • Lion Precision reliability

  • CE and RoHS Compliant

  • Easy, Push-Button Teach

  • Programmable Light/Dark Switching

  • Optional Manual Sensitivity Settings

  • Industry standard NPN & PNP outputs

  • Lion Precision reliability

  • CE and RoHS Compliant

  • Clear-on-clear sensing

  • No adjustments necessary after initial setup

  • Tear-Tape Design

  • Industry standard output

  • Lion Precision reliability

  • Two-Year Warranty

  • CE and RoHS Compliant

 

LRD6300  Lion Precision  Capacitive Label Sensor, Transparent And Paper Label Detection

Lion Precision markasına ait tüm ürünler

    0 kayıt bulundu

      ALFABETİK MARKA LİSTESİ

      Ürün Gruplarına Göre Filtrele

      Sertifikalarımız

      Oruçreis Mah. Tekstilkent Tic. Mrk.
      G2 Blok, No:101 (10AD-Z77)
      34235 Esenler / ISTANBUL
      T: +90 212 235 95 35 / 36
      F: +90 212 235 95 37

      info@imajteknik.com

      E-Bülten Listemize üye olun !

      Gelişmelerden haberdan olmak ve ileride gerçekleştirilecek yeniliklerimizden haberdan olabilmek için e-posta adresinizi bizimle paylaşın!

      Copyright 2014 İmaj Teknik - Tüm hakları saklıdır.