|
Niika Brake
|
Air Hydraulic Booster
NAB 5S-10S
The Push rod of the master cylinder for automotive use is activated by generate hydraulic pressure and actuate the brake.
The brakes fluid is required (DOT3, DOT4 or above) in automobiles.If a new master cylinder is used, be sure to remove the check valve to eliminate remaining pressure.
|
| |
|
|
Niika Brake
|
DBM/DBY
Features :
The combination of hydraulic pressures with an air booster, or an electric magnetic booster and a foot pedal unit provide braking pressure smoothly.
These hydraulic disc brakes are suitable for wire drawing machines, traveling and rotating cranes plus vehicles and equipment with tires.
Models :
DBM 10
DBM 20
|
| |
|
|
Niika Brake
|
NAB-S Series
NAB 5S
NAB 10S
|
| |
|
|
Niika Brake
|
DBZ-Mini Caliper Series
DBZ-06A DISC BRAK
AIR Disc Brake
Features :
Mini type disc brake series
Palm size extra-small type, air operated , and manual type with leaver arm are available.
The products are suitable for wire winding reels, small vehicles, and roll film winding
|
| |
|
|
Niika Brake
|
DBF 10
Features :
The DBF is a type of small brake which bottom is stationary, adapts differently way of installation, Also can use in the brake of beeline movement.
Big friction area can extend the cycle of maintenance and long life.
If it installs certain brakes on one disc, torque also enlarge along with it certain time.
The DBF series disk brake is suitable for all thickness of the disc by changing the special spacer.
|
| |
|
|
Niika Brake
|
Controller Niika LPC99A 100/240V
Linear Actuators Niika KC150-20 1500KGS
Optical Sensor Niika LS99N/12V
|
| |
|
|
Niika Brake
|
Screws for Niika Air Shaft, Set of 12
Repair kit for DBG 105 Brake
Repair Kit for Niika NAC Clutch
Includes Pads and
(1) G50 Viton O-ring (3.1mm section x 49.4mm id)
(1) G80 Vition O-ring (3.1mm section x 79.4mm id)
|
| |
|
|
Niika Brake
|
Air Brake / Clutch Combined Unit
Flange Mounted Torque Activated Shaftless Core Chuck
Self Actuates to hold a roll of material.
|
| |
|
|
Niika Brake
|
Double End Supported Air Differential Shaft / Mandrel - ADN Series
Hold multiple rolls of material on a single shaft - shaft slips to accomodate different diameters
|
|
|
|
|
Niika Brake
|
Thru Bore Mechanical Chuck
Self Actuates to hold a roll of material.
|
|
|
|
|
Niika Brake
|
|
|
Thru Bore Lug Style Air Adapter / Chuck
Adapts core sizes. Inflate to hold a roll of material
|
|
|
|
|
|
|
|
Niika Brake
|
Thru Bore Leaf Style Air Adapter / Chuck
Adapts core sizes. Inflate to hold a roll of material
|
|
|
|
| |
|
|
Niika Brake
|
Double End Supported Rubber Lug Shaft Air Mandrel - LGNR Series
Inflate with air to hold a roll of material. For aluminum and plastic cores.
|
|
|
|
|
Niika Brake
|
Flange Mounted Stepped Mechanical Shaftless Core Chuck
Self Actuates to hold a roll of material.
|
|
|
|
|
|
|
|
Niika Brake
|
B-7709: Brake pad for DBH 105 / DBH 205 Brake
Brake pad for DBH 105 / DBH 205 Brake
|
|
|
|
|
|
|
|
Niika Brake
|
Brake pad for DBH 104 Brake
|
|
|
|
| |
|
|
|
|
|
Niika Brake
|
Diaphram for DBG 104 Brake
|
|
|
|
|
|
|
|
Niika Brake
|
Diaphram for DBG 105 Brake
|
|
|
|
|
|
|
|
Niika Brake
|
Diaphram for DBH 205 Brake
|
|
|
|
| |
|
|
|
Niika Brake
|
Diaphram for DBH 105 Brake
|
|
|
|
| |
|
|
|
Niika Brake
|
Diaphram for DBH 104 Brake
|
|
|
|
|
|
|
|
Niika Brake
|
DBZ-06-Pad: Brake Pad Set for DBZ-06M or DBZ-06A
|
|
|
|
| |
|
|
|
|
|
|
B-7465: Repair kit for DBG 104 Brake
Repair kit for DBG 104 Brake
Includes Pads and Diaphram
|
|
|
|
|
|
|
|
Niika Brake
|
B-7466: Repair kit for DBG 105 Brake - Includes Pads, Diaphram and screws
Repair kit for DBG 105 Brake
Includes Two Pads, Diaphram and Screws.
|
|
|
|
|
|
|
|
Niika Brake
|
Disc, 229mm Outer Diameter, 20mm Thick
Disc for use with Caliper Disc Brake
|
|
|
|
|
|
|
|
Niika Brake
|
D300: Disc, 300mm Outer Diameter, 20mm Thick
Disc for use with Caliper Disc Brake
|
|
|
|
|
|
|
|
Niika Brake
|
DBZ-06A: Air Brake for 6mm Thick Disc
|
|
|
|
|
|
|
|
Niika Brake
|
DBZ-06M: Manual Brake for 6mm Thick Disc
|
|
|
|
|
|
|
|
Niika Brake
|
DBF-10: Air Disc Brake
|
|
|
|
|
|
|
|
Niika Brake
|
DBZ-10A: Air Brake for 10mm Thick Disc
|
|
|
|
|
|
|
|
Niika Brake
|
Hydraulic Booster
Provide pressure to hydraulic brake
|
|
|
|
|
|
|
|
Niika Brake
|
BST4
Provide pressure to hydraulic brake
|
|
|
|
|
|
|
|
Niika Brake
|
Powder brake controller
Powder brake controller
|
|
|
|
|
|
|
|
Niika Brake
|
WT-PDC-05-002: Powder brake controller, 110 Volts, open internal mounting
Powder brake controller
|
|
|
|
|
|
|
|
Niika Brake
|
WT-PDC-05-001: Powder brake controller, 110 Volts AC, Closed External Mounting
Powder brake controller
|
|
|
|
|
Niika Brake
|
|
|
Powder brake controller, 220 Volts, open internal mounting
Powder brake controller
|
|
|
|
|
|
|
|
Niika Brake
|
WT-PDC-05-005: Powder brake controller, 220 Volts AC, Closed External Mounting
Powder brake controller
|
|
|
|
|
|
|
|
Niika Brake
|
DBG105: Air Disc Brake for 10mm Thick Disc
|
|
|
|
|
|
|
|
Niika Brake
|
DBG104: Air Disc Brake for 10mm Thick Disc
|
|
|
|
|
Niika Brake
|
|
|
Niika Brake
|
Q-3230: 3" Diameter Thru Bore Mechanical Lug Chuck - With Flange
|
|
|
|
|
|
|
|
Niika Brake
|
Q-3237-005: 3" Diameter x 1-1/4" Bore Mechanical Lug Chuck - Without Flange
|
|
|
|
|
|
|
|
Niika Brake
|
Q-3230-007: 3" Diameter Thru Bore Mechanical Lug Chuck, With Flange, 1-1/2" Bore
|
|
|
|
|
|
|
|
Niika Brake
|
Q-3230-003 3" Diameter x 1" Bore Mechanical Lug Chuck - With Flange
|
|
|
|
|
|
|
|
Niika Brake
|
Q-3237-007: 3" Diameter x 1-1/2" Bore Mechanical Lug Chuck - Without Flange
|
|
|
|
|
|
|
|
Niika Brake
|
Q-3230-001: 3" Diameter Thru Bore Mechanical Lug Chuck, With Flange, 3/4" Dia. Bore
|
|
|
|
|
|
|
|
Niika Brake
|
Q-3237-013: 3" Diameter x 1.754" Bore Mechanical Lug Chuck - Without Flange
|
|
|
|
|
|
|
|
Niika Brake
|
Q-3237-014: 3" Diameter x 1.508-1.510" Bore Mechanical Lug Chuck - Without Flange
|
|
|
|
| |
|
|
Niika Brake
|
Q-3230-004: 3" Diameter Thru Bore Mechanical Lug Chuck, With Flange, 1.127" Dia. Bore
|
|
|
|
|
|
|
|
Niika Brake
|
Q-3230-020: 3" Diameter Thru Bore Mechanical Lug Chuck, With Flange, 1-9/16" Bore
|
|
|
|
|
|
|
|
Niika Brake
|
Q-3230-021: 3" Diameter Thru Bore Mechanical Lug Chuck, With Flange, 1.577" Bore
|
|
|
|
|
Niika Brake
|
Q-3237-017: 3" Diameter x 1.577" Bore Mechanical Lug Chuck - Without Flange
Self Actuates to hold a roll of material.
|
|
|
|
|
Niika Brake
|
Q-3230-024: 3" Diameter Thru Bore Mechanical Lug Chuck - With Flange Thru Bore Mechanical Lug Chuck No Flange
Self Actuates to hold a roll of material.
|
|
|
|
|
|
|
|
Niika Brake
|
DBH104: Air Disc Brake for 10mm Thick Disc
|
|
|
|
|
|
|
|
Niika Brake
|
DBH105: Air Disc Brake for 10mm Thick Disc
|
|
|
|
|
|
|
|
Niika Brake
|
DBH-204-(RIGHT): Air Disc Brake for 20mm Thick Disc
|
|
|
|
|
|
|
|
Niika Brake
|
DBH-204-(LEFT): Air Disc Brake for 20mm Thick Disc
|
|
|
|
|
|
|
|
Niika Brake
|
Powder Clutch (Magnetic Particle Clutch), 1.48 ft-lbs (17.7 in-lbs), 2.56" Outer Diameter
|
|
|
|
|
|
|
|
Niika Brake
|
DBM10: Hydraulic Disc Brake for 10mm Thick Disc
|
|
|
|
|
|
|
|
Niika Brake
|
DBH205: Air Disc Brake for 20mm Thick Disc
|
|
|
|
|
|
|
|
Niika Brake
|
DBH205-Right: Air Disc Brake for 20mm Thick Disc
|
|
|
|
|
|
|
|
Niika Brake
|
Rebuild NAB-20T-001
|
|
|
|
|
|
|
|
Niika Brake
|
DBM-20: Hydraulic Disc Brake for 20mm Thick Disc
|
|
|
|
|
|
|
|
Niika Brake
|
NAC-2: Air Clutch, 14 ft-lbs (168 in-lbs), 4.5" diameter friction surface - 3/4 Bore, 0.188" Wide Keyway
|
|
|
|
|
|
|
|
Niika Brake
|
Air Clutch, 14 ft-lbs (168 in-lbs), 4.5" diameter friction surface, 20mm Bore
|
|
|
|
|
|
|
|
Niika Brake
|
NOT AVAILABLE WITH 1" BORE -Air Clutch, 14 ft-lbs (168 in-lbs), 4.5" diameter friction surface, 1" Bore
|
|
|
|
|
|
|
|
Niika Brake
|
NOT AVAILABLE WITH 1" BORE Air Clutch, 14 ft-lbs (168 in-lbs), 4.5" diameter friction surface, 1" Bore
|
|
|
|
|
|
|
|
Niika Brake
|
DBM-20R: Hydraulic Disc Brake for 20mm Thick Disc - Right Hand
|
|
|
|
|
|
|
|
Niika Brake
|
B-6770: Safety Chuck - Foot Mounted - 1-1/4" square pocket - 1" mounting shaft
Supports each end of a core shaft. Allows easy loading and unloading. Compare to Boschert 22-30 STW
|
|
|
|
|
|
|
|
Niika Brake
|
Safety Chuck with Shaft, Foot Mounted, 25mm Square Pocket with 28 mm dia. x 100mm long mounting shaft
Supports each end of a core shaft. Allows easy loading and unloading. Compare to Boschert 30-40 FLO / FLW
|
|
|
|
|
|
|
|
Niika Brake
|
NAB-5T: Air Brake, 36 ft-lbs (432 in-lbs), 4.5" diameter friction surface
|
|
|
|
|
|
|
|
Niika Brake
|
NAB-5T-001: Air Brake, 36 ft-lbs (432 in-lbs), 4.5" diameter friction surface, 1" bore
|
|
|
|
| |
|
|
|
|
|
Niika Brake
|
NAB-5T-002: Air Brake, 36 ft-lbs (432 in-lbs), 4.5" diameter friction surface, 25mm bore
|
|
|
|
|
|
|
|
Niika Brake
|
NAB-5T-003: Air Brake, 36 ft-lbs (432 in-lbs), 4.5" diameter friction surface, 28mm bore
|
|
|
|
|
|
|
|
Niika Brake
|
NAB-5T-004: Air Brake, 36 ft-lbs (432 in-lbs), 4.5" diameter friction surface, 5/8" bore and 3/16" keyway
|
|
|
|
|
|
|
|
Niika Brake
|
VA-816: Powder brake / clutch driver
Powder brake / Clutch driver
|
|
|
|
|
|
|
|
Niika Brake
|
Tension Control System - Controller - 110 Volts
Tension Control System - Controller - 110 Volts
The controller of Magnetic Powder Brake/Clutch applies stable electricity to the magnetic coil in Brake/Clutch. When electricity passes through the magnetic coil, it will engender magnetic force to gather magnetic powder for transmitting torque. Under continual movement, torque will be transmitted accordingly. By controlling the flow of electric current, Brake/Clutch is controlled accurately to move or to stop the rolling process, in order to get the required tension control. The design of Controller VA 816 series is based on direct ratio relationship between electricity and magnetic field. Furthermore, we have improved the treatment of temperature and sensitivity, after the adjustment of electrical circuit, Magnetic Brake/Clutch can get excellent performance of torque control and output.
|
|
|
|
|
|
|
|
Niika Brake
|
VA-816-1300: Powder brake / clutch driver
Powder brake / Clutch driver
|
|
|
|
|
|
|
|
Niika Brake
|
Powder Clutch (Magnetic Particle Clutch), 3.67 ft-lbs (44 in-lbs), 3.15" Outer Diameter
Provides a smooth adjustable tension to your web while rewinding (adding to the roll)
|
|
|
|
|
|
|
|
Niika Brake
|
Air Clutch, 36 ft-lbs (432 in-lbs), 6" diameter friction surface, 25mm bore
|
|
|
|
|
|
|
|
Niika Brake
|
POB-012: Powder Brake (Magnetic Particle Brake), 9 ft-lbs (108 in-lbs), 6" Outer Diameter
|
|
|
|
|
|
|
|
Niika Brake
|
POB-0.2: Powder Brake (Magnetic Particle Brake), 1.48 ft-lbs (17.7 in-lbs), 2.71" Outer Diameter
|
|
|
|
|
|
|
|
Niika Brake
|
POB-0.5: Powder Brake (Magnetic Particle Brake), 3.67 ft-lbs (44 in-lbs), 3.23" Outer Diameter
|
|
|
|
|
|
|
|
Niika Brake
|
Safety Chuck with Shaft, Flange Mounted, 1" square pocket - Ø1" x 4.5" Long mounting shaft, full length 1/4" keyway
Supports each end of a core shaft. Allows easy loading and unloading. Compare to Boschert 30-40 FLO / FLW
|
|
|
|
|
|
|
|
Niika Brake
|
POC-012: Powder Clutch (Magnetic Particle Clutch), 9 ft-lbs (108 in-lbs), 6" Outer Diameter
Provides a smooth adjustable tension to your web while rewinding (adding to the roll)
|
|
|
|
|
|
|
|
Niika Brake
|
B-8881: Safety Chuck - Foot Mounted - 1" square pocket - 1" mounting shaft
Supports each end of a core shaft. Allows easy loading and unloading. Compare to Boschert 22-30 STW
|
|
|
|
|
|
|
|
Niika Brake
|
Safety Chuck (PIW28) Foot Mounted - 1" square pocket - 1" Diameter x 4.5" Long mounting shaft with 1/4" full length keyway
Supports each end of a core shaft. Allows easy loading and unloading. Compare to Boschert 22-30 STO / STW
|
|
|
|
|
|
|
|
Niika Brake
|
NAC-2-003: Air Clutch, 14 ft-lbs (168 in-lbs), 4.5" diameter friction surface, 20mm Bore, with locked input (Used as brake)
|
|
|
|
|
|
|
|
Niika Brake
|
FLW35-005: Safety Chuck with Shaft, Flange Mounted, 1-1/2" square pocket - Ø1-3/8" x 10" Long mounting shaft, full length keyway
|
|
|
|
|
|
|
|
Niika Brake
|
Safety Chuck 35 Series with Shaft, Flange Mounted, 45 Degree Entry, 1-1/2" square pocket - Ø1-3/8" x 4.5" Long mounting shaft, full length keyway
|
|
|
|
|
|
|
|
Niika Brake
|
Safety Chuck with Shaft, Foot Mounted, 1-1/2" square pocket - Ø1-3/8" x 10" Long mounting shaft, full length keyway
|
|
|
|
|
|
|
|
Niika Brake
|
POB-025: Powder Brake (Magnetic Particle Brake), 18 ft-lbs (216 in-lbs), 7.25" Outer Diameter
|
|
|
|
|
|
|
|
Niika Brake
|
Disc, 400mm Outer Diamteter, 20mm Thick
Disc for use with Caliper Disc Brake
|
|
|
|
|
|
|
|
Niika Brake
|
PIW35-012: Safety Chuck with Shaft, Foot Mounted, 1-1/2" square pocket - Ø1-1/8" x 6" Long mounting shaft
Supports each end of a core shaft. Allows easy loading and unloading. Compare to Boschert 30-40 FLO / FLW
|
|
|
|
|
|
|
|
Niika Brake
|
PIW35-014: Safety Chuck with Shaft, Foot Mounted, with 45 Degree entry 1-1/2" square pocket - Ø1-3/8" x 4.5" Long mounting shaft, with full length 5/16" keyway
Supports each end of a core shaft. Allows easy loading and unloading. Compare to Boschert 30-40 FLO / FLW
|
|
|
|
|
|
|
|
Niika Brake
|
E / P Converter
Transfer electric signal input to air pressure
|
|
|
|
|
|
|
|
Niika Brake
|
Safety Chuck with Shaft, Foot Mounted, 1-1/2" square pocket - Ø1-3/8" x 4.5" Long mounting shaft
Supports each end of a core shaft. Allows easy loading and unloading. Compare to Boschert 30-40 FLO / FLW
|
|
|
|
|
|
|
|
Niika Brake
|
Air Brake, 72 ft-lbs (864 in-lbs), 6" diameter friction surface
|
|
|
|
| |
|
|
|
|
|
Niika Brake
|
NAB-10T-001: Air Brake, 72 ft-lbs (864 in-lbs), 6" diameter friction surface with 28mm Bore and 8mm keyway
|
|
|
|
| |
|
|
|
|
|
Niika Brake
|
NAB-10T-003: Air Brake, 72 ft-lbs (864 in-lbs), 6" diameter friction surface with 1-3/8" Bore, and 5/16" Keyway
|
|
|
|
| |
|
|
|
|
|
Niika Brake
|
|
|
|
|
|
NAB -10T-005: Air Brake, 72 ft-lbs (864 in-lbs), with 35mm Bore x 10mm wide keyway
|
|
|
|
|
|
|
|
Niika Brake
|
NAB-10T-006: Air Brake, 72 ft-lbs (864 in-lbs), 6" diameter friction surface with 1.125" Bore and 1/4" keyway
|
|
|
|
|
|
|
|
Niika Brake
|
NAB-10T-002: Air Brake, 72 ft-lbs (864 in-lbs), 6" diameter friction surface with 1" Bore and 1/4" keyway
|
|
|
|