Plastifer is a specialist company with over 50 years of experience in manufacturing ventilation, PP anti-corrosion, chemically resistant Polypropylene products and producing industrial aspiration plant and scrubbing towers.
Plastifer Products:
Plastifer has developed products on four main groups
POLYFAN
Professional centrifugal ventilators in Polypropylene PP, anti-acid and corrosion resistant.
Centrifugal fans in injection-moulded polypropylene that have been made entirely from the acid-proof materials for extracting the acid fumes that are normally found in laboratories, fume hoods, extraction hoods, chemical systems, pharmaceutical systems and galvanising systems. The aspirators are used especially in situations that require resistance to chemical agents, silent operation and energy saving.
Industrial corrosion resistant centrifugal fan:
Over 50 years' experience and significant investments in Research and Development have enabled Plastifer to provide a complete range of high-quality products that enable it to be one of the world's leading companies.
Centrifugal fans in injection-moulded polypropylene that have been made entirely from the acid-proof materials for extracting the acid fumes that are normally found in laboratories, extraction hoods, chemical systems, pharmaceutical systems and galvanising systems. The aspirators are used especially in situations that require resistance to chemical agents, silent operation and energy saving.
The Polyfan range also includes aspirators Atex certified in antistatic polypropylene flash-proof conductor of electricity for installations in dangerous areas, VS/ATEX range conforms to the Directive ATEX 2014/34/UE - EN 14986, tower centrifugal extractors, scrubbers and a vast range of accessories for complete systems.
Plastifer’s production is the largest range of corrosion resistant centrifugal fans available. Our technical staff is available to assist and advise you on the most appropriate fan selection for your requirement.
Polyfan features :
-
Polypropylene is resistant to ultra-violet rays, is tough and is highly resistant to chemical agents, especially organic solvents.
-
The injection-moulded polypropylene fans are statically and dynamically balanced in order to ensure silent and energy-saving operation.
-
All the fans have a circular intake and a flanged rectangular discharge fitted as standard although a round discharge connection can be fitted.
-
Polyfan fans can be adjusted to 8 positions through 360°.
-
All the units have been constructed for outdoor use with nylon or galvanised metal seats.
-
Polyfan units can be combined with single-phase, three-phase and EEx-d, units at one or two speeds as supplied by specialised builders.
Plastifer POLYFAN VSB Series Products
|
 VSB 14
Plastifer Extract Fan Low Pressure
Produced completely by injection moulding.Polypropylene housing resistant to UV rays and adjustable to 8 positions. High-performance polypropylene impeller with forward curved blades, statically and dynamically balanced, incorporating a reinforced hub. Gaskets from corrosive material providing protection against shaft/case leakage. Nylon support stool for B3/B5 motors. Stainless steel external assembly fittings. Available with three-phase and single phase single speed motors, two-speed motors with IP55 protection or Ex-d protection
Plastifer VSB14 Series
Products Codes
|
 VSB 20
Plastifer Extract Fan Low Pressure
Produced completely by injection moulding. Polypropylene housing resistant to UV rays and adjustable to 8 positions. High-performance polypropylene impeller with forward curved blades, statically and dynamically balanced, incorporating a reinforced hub. Gaskets from corrosive material providing protection against shaft/case leakage. Nylon support stool for B3/B5 motors. Stainless steel external assembly fittings. Available with three-phase and single phase single speed motors, two-speed motors with IP55 protection or Ex-d protection.
Plastifer VSB20 Series
Products Codes
|
 VSB 23
Plastifer Extract Fan Low Pressure
Produced completely by injection moulding. Polypropylene housing resistant to UV rays and adjustable to 8 positions. High-performance polypropylene impeller with forward curved blades, statically and dynamically balanced, incorporating a reinforced hub. Gaskets from corrosive material providing protection against shaft/case leakage. Nylon support stool for B3/B5 motors. Stainless steel external assembly fittings. Available with three-phase and single phase single speed motors, two-speed motors with IP55 protection or Ex-d protection.
Plastifer VSB23 Series
Products Codes
|
|
 VSB 24
Plastifer Extract Fan Low Pressure
Produced completely by injection moulding. Polypropylene housing resistant to UV rays and adjustable to 8 positions. High-performance polypropylene impeller with forward curved blades, statically and dynamically balanced, incorporating a reinforced hub. Gaskets from corrosive material providing protection against shaft/case leakage. Nylon support stool for B3/B5 motors. Stainless steel external assembly fittings. Available with three-phase and single phase single speed motors, two-speed motors with IP55 protection or Ex-d protection.
Plastifer VSB24 Series
Products Codes
|
 VSB 25
Plastifer Extract Fan Low Pressure
Produced completely by injection moulding. Polypropylene housing resistant to UV rays and adjustable to 8 positions. High-performance polypropylene impeller with forward curved blades, statically and dynamically balanced, incorporating a reinforced hub. Gaskets from corrosive material providing protection against shaft/case leakage. Nylon support stool for B3/B5 motors. Stainless steel external assembly fittings. Available with three-phase and single phase single speed motors, two-speed motors with IP55 protection or Ex-d protection.
Plastifer VSB25 Series
Products Codes
|
 VSB 30
Plastifer Extract Fan Low Pressure
Produced completely by injection moulding. Polypropylene housing resistant to UV rays and adjustable to 8 positions. High-performance polypropylene impeller with forward curved blades, statically and dynamically balanced, incorporating a reinforced hub. Gaskets from corrosive material providing protection against shaft/case leakage. Polypropylene support stool for B3 motors. Stainless steel external assembly fittings. Available with three-phase and single phase single speed motors, two-speed motors with IP55 protection or Ex-d protection
Plastifer VSB30 Series
Products Codes
|
|
 VSB 35
Plastifer Extract Fan Low Pressure
Produced completely by injection moulding. Polypropylene housing resistant to UV rays and adjustable to 8 positions. High-performance polypropylene impeller with forward curved blades, statically and dynamically balanced, incorporating a reinforced hub. Gaskets from corrosive material providing protection against shaft/case leakage. Polypropylene support stool for B3 motors. Stainless steel external assembly fittings. Available with three-phase and single phase single speed motors, two-speed motors with IP55 protection or Ex-d protection.
Plastifer VSB35 Series
Products Codes
|
 VSB 42
Plastifer Extract Fan Low Pressure
Produced completely by injection moulding. Polypropylene housing resistant to UV rays and adjustable to 8 positions. High-performance polypropylene impeller with forward curved blades, statically and dynamically balanced, incorporating a reinforced hub. Gaskets from corrosive material providing protection against shaft/case leakage. Galvanised steel stool for B3 motors. Stainless steel external assembly fittings. Available with three-phase and single phase single speed motors, two-speed motors with IP55 protection or Ex-d protection
Plastifer VSB24 Series
Products Codes.
|
 VSB 50
Plastifer Extract Fan Low Pressure
Injection-moulded fabricated. Polypropylene housing resistant to UV rays, and adjustable to 8 positions. High-performance polypropylene impeller with forward curved blades, statically and dynamically balanced, incorporating a shielded aluminium reinforced hub. Gaskets from corrosive material providing protection against shaft/case leakage. Galvanised steel stool for B3 motors. Stainless steel external assembly fittings. Available with three-phase and single phase single speed motors, two-speed motors with IP55 protection or Ex-d protection. Fans available as direct drive or indirect belt drive.
Plastifer VSB50 Series
Products Codes
|
|
 VSB 60
Plastifer Extract Fan Low Pressure
Injection-moulded fabricated. Polypropylene housing resistant to UV rays, and adjustable to 8 positions. High-performance polypropylene impeller with forward curved blades, statically and dynamically balanced, incorporating a shielded aluminium reinforced hub. Gaskets from corrosive material providing protection against shaft/case leakage. Galvanised steel stool for B3 motors. Stainless steel external assembly fittings. Available with three-phase and single phase single speed motors, two-speed motors with IP55 protection or Ex-d protection. Fans available as direct drive or indirect belt drive.
Plastifer VSB60 Series
Products Codes
|
 VSB 70
Plasticer Extract Fan Low Pressure
Polypropylene welded housing resistant to UV rays and adjustable to 8 positions. High-performance polypropylene impeller with forward curved blades, statically and dynamically balanced, incorporating a shielded aluminium reinforced hub. Gaskets from corrosive material providing protection against shaft/case leakage. Galvanised steel stool for B3 motors. Stainless steel external assembly fittings. Available with three-phase and single phase single speed motors, two-speed motors with IP55 protection or Ex-d protection. Fans available as direct drive or indirect belt drive.
Plastifer VSB70 Series
Products Codes
|
Plastifer POLYFAN VSM Series
|
 VSM 25
Extract Fan Medium Pressure
Produced completely by injection moulding. Polypropylene housing resistant to UV rays and adjustable to 8 positions. High-performance polypropylene impeller with forward curved blades, statically and dynamically balanced, incorporating a reinforced hub. Gaskets from corrosive material providing protection against shaft/case leakage. Nylon support stool for B3/B5 motors. Stainless steel external assembly fittings. Available with three-phase and single phase single speed motors, two-speed motors with IP55 protection or Ex-d protection
Plastifer VSM25 Series
Products Codes
|
 VSM 30
Extract Fan Medium Pressure
Polypropylene welded housing resistant to UV rays and adjustable to 8 positions. High-performance polypropylene impeller with forward curved blades, statically and dynamically balanced, incorporating a reinforced hub. Gaskets from corrosive material providing protection against shaft/case leakage. Polypropylene support stool for B3 motors. Stainless steel external assembly fittings. Available with three-phase and single phase single speed motors, two-speed motors with IP55 protection or Ex-d protection.
Plastifer VSM30 Series
Products Codes
|
 VSM 35
Extract Fan Medium Pressure
Polypropylene welded housing resistant to UV rays and adjustable to 8 positions. High-performance polypropylene impeller with forward curved blades, statically and dynamically balanced, incorporating a reinforced hub. Gaskets from corrosive material providing protection against shaft/case leakage. Polypropylene support stool for B3 motors. Stainless steel external assembly fittings. Available with three-phase and single phase single speed motors, two-speed motors with IP55 protection or Ex-d protection.
|
|
 VSM 42
Extract Fan Medium Pressure
Polypropylene welded housing resistant to UV rays and adjustable to 8 positions. High-performance polypropylene impeller with forward curved blades, statically and dynamically balanced, incorporating a shielded aluminium reinforced hub Gaskets from corrosive material providing protection against shaft/case leakage. Galvanised steel stool for B3 motors. Stainless steel external assembly fittings. Available with three-phase and single phase single speed motors, two-speed motors with IP55 protection or Ex-d protection.
Plastifer VSM42 Series
Products Codes
|
 VSM 50
Extract Fan Medium Pressure
Polypropylene welded housing resistant to UV rays and adjustable to 8 positions. High-performance polypropylene impeller with forward curved blades, statically and dynamically balanced, incorporating a shielded aluminium reinforced hub. Gaskets from corrosive material providing protection against shaft/case leakage. Galvanised steel stool for B3 motors. Stainless steel external assembly fittings. Available with three-phase and single phase single speed motors, two-speed motors with IP55 protection or Ex-d protection. Fans available as direct drive or indirect belt drive.
Plastifer VSM50 Series
Products Codes
|
 VSM 60
Extract Fan Medium Pressure
Polypropylene welded housing resistant to UV rays and adjustable to 8 positions. High-performance polypropylene impeller with forward curved blades, statically and dynamically balanced, incorporating a shielded aluminium reinforced hub. Gaskets from corrosive material providing protection against shaft/case leakage. Galvanised steel stool for B3 motors. Stainless steel external assembly fittings. Available with three-phase and single phase single speed motors, two-speed motors with IP55 protection or Ex-d protection. Fans available as direct drive or indirect belt drive.
|
|
i VSM 70
Extract Fan Medium Pressure
Polypropylene welded housing resistant to UV rays and adjustable to 8 positions. High-performance polypropylene impeller with forward curved blades, statically and dynamically balanced, incorporating a shielded aluminium reinforced hub. Gaskets from corrosive material providing protection against shaft/case leakage. Galvanised steel stool for B3 motors. Stainless steel external assembly fittings. Available with three-phase and single phase single speed motors, two-speed motors with IP55 protection or Ex-d protection. Fans available as direct drive or indirect belt drive.
Plastifer VSM70 Series
Products Codes
|
|
|
Plastifer POLYFAN VSA Series
|
 VSA 20
Extract Fan High Pressure
Produced completely by injection moulding. Polypropylene housing resistant to UV rays and adjustable to 8 positions. High-performance polypropylene impeller with forward curved blades, statically and dynamically balanced, incorporating a reinforced hub. Gaskets from corrosive material providing protection against shaft/case leakage. Nylon support stool for B3/B5 motors. Stainless steel external assembly fittings. Available with three-phase and single phase single speed motors, two-speed motors with IP55 protection or Ex-d protection.
Plastifer VSA20 Series
Products Codes
|
 VSA 25
Extract Fan High Pressure
Produced completely by injection moulding. Polypropylene housing resistant to UV rays and adjustable to 8 positions. High-performance polypropylene impeller with forward curved blades, statically and dynamically balanced, incorporating a reinforced hub. Gaskets from corrosive material providing protection against shaft/case leakage. Nylon support stool for B3/B5 motors. Stainless steel external assembly fittings. Available with three-phase and single phase single speed motors, two-speed motors with IP55 protection or Ex-d protection.
Plastifer VSA25 Series
Products Codes
|
 VSA 30
Extract Fan High Pressure
Produced completely by injection moulding. Polypropylene housing resistant to UV rays and adjustable to 8 positions. High-performance polypropylene impeller with forward curved blades, statically and dynamically balanced, incorporating a reinforced hub. Gaskets from corrosive material providing protection against shaft/case leakage. Polypropylene support stool for B3 motors. Stainless steel external assembly fittings. Available with three-phase and single phase single speed motors, two-speed motors with IP55 protection or Ex-d protection.
Plastifer VSA30 Series
Products Codes
|
|
 VSA 35
Extract Fan High Pressure
Polypropylene welded housing resistant to UV rays and adjustable to 8 positions. High-performance polypropylene impeller with forward curved blades, statically and dynamically balanced, incorporating a reinforced hub. Gaskets from corrosive material providing protection against shaft/case leakage. Polypropylene support stool for B3 motors. Stainless steel external assembly fittings. Available with three-phase and single phase single speed motors, two-speed motors with IP55 protection or Ex-d protection.
Plastifer VSA35 Series
Products Codes
|
 VSA 42
Extract Fan High Pressure
Polypropylene welded housing resistant to UV rays and adjustable to 8 positions. High-performance polypropylene impeller with forward curved blades, statically and dynamically balanced, incorporating a shielded aluminium reinforced hub Gaskets from corrosive material providing protection against shaft/case leakage. Galvanised steel stool for B3 motors. Stainless steel external assembly fittings. Available with three-phase and single phase single speed motors, two-speed motors with IP55 protection or Ex-d protection.
Plastifer VSA42 Series
Products Codes
|
 VSA 50
Extract Fan High Pressure
Polypropylene welded housing resistant to UV rays and adjustable to 8 positions. High-performance polypropylene impeller with forward curved blades, statically and dynamically balanced, incorporating a shielded aluminium reinforced hub. Gaskets from corrosive material providing protection against shaft/case leakage. Galvanised steel stool for B3 motors. Stainless steel external assembly fittings. Available with three-phase and single phase single speed motors, two-speed motors with IP55 protection or Ex-d protection. Fans available as direct drive or indirect belt drive.
Plastifer VSA50 Series
Products Codes
|
|
 VSA 60
Extract Fan High Pressure
Polypropylene welded housing resistant to UV rays and adjustable to 8 positions. High-performance polypropylene impeller with forward curved blades, statically and dynamically balanced, incorporating a shielded aluminium reinforced hub. Gaskets from corrosive material providing protection against shaft/case leakage. Galvanised steel stool for B3 motors. Stainless steel external assembly fittings. Available with three-phase and single phase single speed motors, two-speed motors with IP55 protection or Ex-d protection. Fans available as direct drive or indirect belt drive.
Plastifer VSA60 Series
Products Codes
|
 VSA 70
Extract Fan High Pressure
Polypropylene welded housing resistant to UV rays and adjustable to 8 positions. High-performance polypropylene impeller with forward curved blades, statically and dynamically balanced, incorporating a shielded aluminium reinforced hub. Gaskets from corrosive material providing protection against shaft/case leakage. Galvanised steel stool for B3 motors. Stainless steel external assembly fittings. Available with three-phase and single phase single speed motors, two-speed motors with IP55 protection or Ex-d protection. Fans available as direct drive or indirect belt drive.
Plastifer VSA70 Series
Products Codes
|
|
Plastifer POLYFAN VSAA Series
|
 VSAA 20
Extract Fan Elevated Pressure
Polypropylene welded housing resistant to UV rays and adjustable to 8 positions. High-performance polypropylene impeller with forward curved blades, statically and dynamically balanced, incorporating a shielded aluminium reinforced hub. Gaskets from corrosive material providing protection against shaft/case leakage. Galvanised steel stool for B3 motors. Stainless steel external assembly fittings. Available with three-phase and single phase single speed motors, two-speed motors with IP55 protection or Ex-d protection.
Plastifer VSAA20 Series
Products Codes
|
 VSAA 25
Extract Fan Elevated Pressure
Polypropylene welded housing resistant to UV rays and adjustable to 8 positions. High-performance polypropylene impeller with forward curved blades, statically and dynamically balanced, incorporating a shielded aluminium reinforced hub. Gaskets from corrosive material providing protection against shaft/case leakage. Galvanised steel stool for B3 motors. Stainless steel external assembly fittings. Available with three-phase and single phase single speed motors, two-speed motors with IP55 protection or Ex-d protection.
Plastifer VSAA25 Series
Products Codes
|
 VSAA 30
Extract Fan Elevated Pressure
Polypropylene welded housing resistant to UV rays and adjustable to 8 positions. High-performance polypropylene impeller with forward curved blades, statically and dynamically balanced, incorporating a reinforced hub. Gaskets from corrosive material providing protection against shaft/case leakage. Polypropylene support stool for B3 motors. Stainless steel external assembly fittings. Available with three-phase and single phase single speed motors, two-speed motors with IP55 protection or Ex-d protection.
Plastifer VSAA30 Series
Products Codes
|
|
 VSAA 35
Extract Fan Elevated Pressure
Polypropylene welded housing resistant to UV rays and adjustable to 8 positions. High-performance polypropylene impeller with forward curved blades, statically and dynamically balanced, incorporating a reinforced hub. Gaskets from corrosive material providing protection against shaft/case leakage. Polypropylene support stool for B3 motors. Stainless steel external assembly fittings. Available with three-phase and single phase single speed motors, two-speed motors with IP55 protection or Ex-d protection.
Plastifer VSAA35 Series
Products Codes
|
 VSAA 42
Extract Fan Elevated Pressure
Polypropylene welded housing resistant to UV rays and adjustable to 8 positions. High-performance polypropylene impeller with forward curved blades, statically and dynamically balanced, incorporating a shielded aluminium reinforced hub Gaskets from corrosive material providing protection against shaft/case leakage. Galvanised steel stool for B3 motors. Stainless steel external assembly fittings. Available with three-phase and single phase single speed motors, two-speed motors with IP55 protection or Ex-d protection.
Plastifer VSAA42 Series
Products Codes
|
 VSAA 50
Extract Fan Elevated Pressure
Polypropylene welded housing resistant to UV rays and adjustable to 8 positions. High-performance polypropylene impeller with forward curved blades, statically and dynamically balanced, incorporating a shielded aluminium reinforced hub. Gaskets from corrosive material providing protection against shaft/case leakage. Galvanised steel stool for B3 motors. Stainless steel external assembly fittings. Available with three-phase and single phase single speed motors, two-speed motors with IP55 protection or Ex-d protection. Fans available as direct drive or indirect belt drive.
Plastifer VSAA50 Series
Products Codes
|
|
 VSAA 60
Extract Fan Elevated Pressure
Polypropylene welded housing resistant to UV rays and adjustable to 8 positions. High-performance polypropylene impeller with forward curved blades, statically and dynamically balanced, incorporating a shielded aluminium reinforced hub. Gaskets from corrosive material providing protection against shaft/case leakage. Galvanised steel stool for B3 motors. Stainless steel external assembly fittings. Available with three-phase and single phase single speed motors, two-speed motors with IP55 protection or Ex-d protection. Fans available as direct drive or indirect belt drive.
Plastifer VSAA60 Series
Products Codes
|
 VSAA 70
Extract Fan Elevated Pressure
Polypropylene welded housing resistant to UV rays and adjustable to 8 positions. High-performance polypropylene impeller with forward curved blades, statically and dynamically balanced, incorporating a shielded aluminium reinforced hub. Gaskets from corrosive material providing protection against shaft/case leakage. Galvanised steel stool for B3 motors. Stainless steel external assembly fittings. Available with three-phase and single phase single speed motors, two-speed motors with IP55 protection or Ex-d protection. Fans available as direct drive or indirect belt drive.
Plastifer VSAA70 Series
Products Codes
|
|
Plastifer POLYFAN PR Series
Centrifugal extract fans with inverted blades
Polypropylene housing resistant to UV rays and adjustable to 8 positions. Impeller in polypropylene or stainless steel with inverted blades, statically and dynamically balanced. Gaskets from corrosive material providing protection against shaft/case leakage.
Galvanised steel stool for B3 motors. Available with three-phase single and two-speed motor with IP55 protection or EEx-d protection. Fans may be direct coupled or indirectly belt driven Capacity ranges from 5,000 to 30000 m3/h, Pressure ranging from 10 to 250 mmH2O.
THE ADVANTAGES OF POLYFAN
1) Injection moulding techniques achieve a homogeneous uniform thickness in the case housing, flange plates and impeller. This technique offers higher mechanical resistance, smoother surfaces and absence of potential weak points commonly associated with other manufacturing systems using thermoforming and rotary moulding.
2) Quality moulds used in the manufacturing process provides perfect impeller finish and balance, contributing to quality, quietness, chemical resistance and operational life of the product.
3) Polyfan is manufactured entirely from corrosive resistant material ensuring any surface that may come into contact with the corrosive fume has no metallic components.
4) The material used, polypropylene, ensures great resistance to corrosive agents and optimum mechanical resistance.
5) Specific design detail: specially designed self aligning sealing gaskets made of non corrosive material provides protection against leaks between the fan case material and the motor shaft.
6) Quality: the UV stabilised component parts are produced using injection moulding techniques to ensure a perfect assembly, trouble free operation and extended working life.
Plastifer POLYFAN VS/ATEX Series
|
 VSBL 14
Atex-Certified Extract Fan Low Pressure
Produced completely by injection moulding. Antistatic polypropylene housing adjustable to 8 positions. High-performance antistatic polypropylene impeller with forward curved blades, statically and dynamically balanced. Gaskets from corrosive material providing protection against shaft/case leakage. Nylon support stool for B3/B5 motors. Stainless steel external assembly fittings. ADPE motor, ATEX CERTIFIED II 2G: Ex-d IIB, Ex-d IIC, T4 or higher, three-phase, single-phase adjustable, at two speeds with IP55 protection.
Plastifer VSBL14 Series
Products Codes
|
 VSBL 20
Atex-Certified Extract Fan Low Pressure
Produced completely by injection moulding. Antistatic polypropylene housing adjustable to 8 positions. High-performance antistatic polypropylene impeller with forward curved blades, statically and dynamically balanced. Gaskets from corrosive material providing protection against shaft/case leakage. Nylon support stool for B3/B5 motors. Stainless steel external assembly fittings. ADPE motor, ATEX CERTIFIED II 2G: Ex-d IIB, Ex-d IIC, T4 or higher, three-phase, single-phase adjustable, at two speeds with IP55 protection.
Plastifer VSBL20 Series
Products Codes
|
 VSBL 25
Atex-Certified Extract Fan Low Pressure
Produced completely by injection moulding. Antistatic polypropylene housing adjustable to 8 positions. High-performance antistatic polypropylene impeller with forward curved blades, statically and dynamically balanced. Gaskets from corrosive material providing protection against shaft/case leakage. Nylon support stool for B3/B5 motors. Stainless steel external assembly fittings. ADPE motor, ATEX CERTIFIED II 2G: Ex-d IIB, Ex-d IIC, T4 or higher, three-phase, single-phase adjustable, at two speeds with IP55 protection.
Plastifer VSBL25 Series
Products Codes
|
|
 VSBL 30
Atex-Certified Extract Fan Low Pressure
Produced completely by injection moulding. Antistatic polypropylene housing adjustable to 8 positions. High-performance antistatic polypropylene impeller with forward curved blades, statically and dynamically balanced, Gaskets from corrosive material providing protection against shaft/case leakage. Polypropylene support stool for B3 motors. Stainless steel external assembly fittings. ADPE motor, ATEX CERTIFIED II 2G: Ex-d IIB, Ex-d IIC, T4 or higher, three-phase, single-phase adjustable, at two speeds with IP55 protection.
Plastifer VSBL30 Series
Products Codes
|
 VSBL 35
Atex-Certified Extract Fan Low Pressure
Produced completely by injection moulding. Antistatic polypropylene housing adjustable to 8 positions. High-performance antistatic polypropylene impeller with forward curved blades, statically and dynamically balanced, Gaskets from corrosive material providing protection against shaft/case leakage. Polypropylene support stool for B3 motors. Stainless steel external assembly fittings. ADPE motor, ATEX CERTIFIED II 2G: Ex-d IIB, Ex-d IIC, T4 or higher, three-phase, single-phase adjustable, at two speeds with IP55 protection.
Plastifer VSBL35 Series
Products Codes
|
 VSBL 42
Atex-Certified Extract Fan Low Pressure
Produced completely by injection moulding. Antistatic polypropylene housing adjustable to 8 positions. High-performance antistatic polypropylene impeller with forward curved blades, statically and dynamically balanced, Gaskets from corrosive material providing protection against shaft/case leakage. Galvanised steel stool for B3 motors. Stainless steel external assembly fittings. ADPE motor, ATEX CERTIFIED II 2G: Ex-d IIB, Ex-d IIC, T4 or higher, three-phase, single-phase adjustable, at two speeds with IP55 protection.
Plastifer VSB42 Series
Products Codes
|
|
 VSAL 20
Atex-Certified Extract Fan High Pressure
Produced completely by injection moulding. Antistatic polypropylene housing adjustable to 8 positions. High-performance antistatic polypropylene impeller with forward curved blades, statically and dynamically balanced. Gaskets from corrosive material providing protection against shaft/case leakage. Nylon support stool for B3/B5 motors. Stainless steel external assembly fittings. ADPE motor, ATEX CERTIFIED II 2G: Ex-d IIB, Ex-d IIC, T4 or higher, three-phase, single-phase adjustable, at two speeds with IP55 protection.
Plastifer VSAL20 Series
Products Codes
|
 VSAL 25
Atex-Certified Extract Fan High Pressure
Produced completely by injection moulding. Antistatic polypropylene housing adjustable to 8 positions. High-performance antistatic polypropylene impeller with forward curved blades, statically and dynamically balanced. Gaskets from corrosive material providing protection against shaft/case leakage. Nylon support stool for B3/B5 motors. Stainless steel external assembly fittings. ADPE motor, ATEX CERTIFIED II 2G: Ex-d IIB, Ex-d IIC, T4 or higher, three-phase, single-phase adjustable, at two speeds with IP55 protection.
Plastifer VSAL25 Series
Products Codes
|
 VSAL 30
Atex-Certified Extract Fan High Pressure
Produced completely by injection moulding. Antistatic polypropylene housing adjustable to 8 positions. High-performance antistatic polypropylene impeller with forward curved blades, statically and dynamically balanced, Gaskets from corrosive material providing protection against shaft/case leakage. Polypropylene support stool for B3 motors. Stainless steel external assembly fittings. ADPE motor, ATEX CERTIFIED II 2G: Ex-d IIB, Ex-d IIC, T4 or higher, three-phase, single-phase adjustable, at two speeds with IP55 protection.
Plastifer VSAL30 Series
Products Codes
|
Plastifer POLYFAN VB3 Series
Centrifugal extract fan for Atomic Absorption
Produced by pressure-forming the aluminium housing, is adjustable to 8 positions. High-performance, galvanised steel impeller. Statically and dynamically balanced. Nylon support stool for B3 motors. Stainless steel external assembly fittings.
Available with three-phase and single phase single speed motors two-speed motors with IP55 protection or Ex-d protection.
Plastifer POLYFAN VSBT/VSAT Series
|
 VSBT 14
Roof Extract Fan Low Pressure
Produced completely by injection moulding. Polypropylene housing and plinth resistant to UV rays. High-performance polypropylene impeller with forward curved blades, statically and dynamically balanced, incorporating a reinforced hub. Gaskets from corrosive material providing protection against shaft/case leakage. Polypropylene motor cover resistant to environmental factors. Stainless steel external assembly fittings. Available with three-phase and single phase single speed motors, two-speed motors with IP55 protection or Ex-d protection
Plastifer VSBT14 Series
Products Codes
|
 VSBT 20
Roof Extract Fan Low Pressure
Produced completely by injection moulding. Polypropylene housing and plinth resistant to UV rays with dual positions. High-performance polypropylene impeller with forward curved blades, statically and dynamically balanced, incorporating a reinforced hub. Gaskets from corrosive material providing protection against shaft/case leakage. Stainless steel external assembly fittings. Available with three-phase and single phase single speed motors, two-speed motors with IP55 protection or Ex-d protection.
Plastifer VSBT20 Series
Products Codes
|
 VSBT 24
Roof Extract Fan Low Pressure
Produced completely by injection moulding. Polypropylene housing and plinth resistant to UV rays with dual positions. High-performance polypropylene impeller with forward curved blades, statically and dynamically balanced, incorporating a reinforced hub. Gaskets from corrosive material providing protection against shaft/case leakage. Stainless steel external assembly fittings. Available with three-phase and single phase single speed motors, two-speed motors with IP55 protection or Ex-d protection
Plastifer VSBT24 Series
Products Codes.
|
|
 VSBT 25
Roof Extract Fan Low Pressure
Produced completely by injection moulding. Polypropylene housing and plinth resistant to UV rays with dual positions. High-performance polypropylene impeller with forward curved blades, statically and dynamically balanced, incorporating a reinforced hub. Gaskets from corrosive material providing protection against shaft/case leakage. Stainless steel external assembly fittings. Available with three-phase and single phase single speed motors, two-speed motors with IP55 protection or Ex-d protection.
Plastifer VSBT25 Series
Products Codes
|
 VSBT 30
Roof Extract Fan Low Pressure
Produced completely by injection moulding. Polypropylene housing and plinth resistant to UV rays with dual positions. High-performance polypropylene impeller with forward curved blades, statically and dynamically balanced, incorporating a reinforced hub. Gaskets from corrosive material providing protection against shaft/case leakage. Stainless steel external assembly fittings. Available with three-phase and single phase single speed motors, two-speed motors with IP55 protection or Ex-d protection.
Plastifer VSBT30 Series
Products Codes
|
|
|
 VSAT 20
Roof Extract Fan High Pressure
Produced completely by injection moulding. Polypropylene housing and plinth resistant to UV rays. High-performance polypropylene impeller with forward curved blades, statically and dynamically balanced, incorporating a reinforced hub. Gaskets from corrosive material providing protection against shaft/case leakage. Polypropylene motor cover resistant to environmental factors. Stainless steel external assembly fittings. Available with three-phase and single phase single speed motors, two-speed motors with IP55 protection or Ex-d protection.
Plastifer VSAT20 Series
Products Codes
|
 VSAT 25
Roof Extract Fan High Pressure
Produced completely by injection moulding. Polypropylene housing and plinth resistant to UV rays with dual positions. High-performance polypropylene impeller with forward curved blades, statically and dynamically balanced, incorporating a reinforced hub. Gaskets from corrosive material providing protection against shaft/case leakage. Stainless steel external assembly fittings. Available with three-phase and single phase single speed motors, two-speed motors with IP55 protection or Ex-d protection.
Plastifer VSAT25 Series
Products Codes
|
 VSAT 30
Roof Extract Fan High Pressure
Produced completely by injection moulding. Polypropylene housing and plinth resistant to UV rays. High-performance polypropylene impeller with forward curved blades, statically and dynamically balanced, incorporating a reinforced hub. Gaskets from corrosive material providing protection against shaft/case leakage. Polypropylene motor cover resistant to environmental factors. Stainless steel external assembly fittings. Available with three-phase and single phase single speed motors, two-speed motors with IP55 protection or Ex-d protection.
Plastifer VSAT30 Series
Products Codes
|
ACCESSORIES SERIES
FAN OUTLET
Manufactured completely from corrosive resistant thermoplastic. Provides connection from a Polyfan flanged outlet to standard diameter metric sections. Horizontal slide blade assists in regulating discharge velocity and fan volume flow. Suitable for Polyfan ‘B’ type rectangular flanged fan outlets.
|
Modello - Fan type
|
Tipo di Pressione - Pressure Type
|
|
B
|
M
|
A
|
AA
|
|
VS-14
|
RPSB14M125*
|
-
|
-
|
-
|
|
VS-20
|
RPSB20M200*
|
-
|
RPSA20P160
|
RPSK20P125
|
|
VS-23
|
RPSY25P250*
|
-
|
-
|
-
|
|
VS-24
|
RPSB25M250*
|
-
|
-
|
-
|
|
VS-25
|
RPSB25M250*
|
RPSY25P250*
|
RPSA25P160
|
RPSK25P160
|
|
VS-30
|
RPSB30M315
|
RPSM30P315
|
RPSA30P200
|
RPSK30P180
|
|
VS-35
|
RPSB35P355
|
RPSM35P355
|
RPSA35P225
|
RPSK35P200
|
|
VS-42
|
RPSB42P400
|
RPSM42P400
|
RPSA42P280
|
RPSK42P250
|
|
VS-50
|
RPSB50P500
|
RPSM50P500
|
RPSA50P315
|
RPSK50P280
|
|
VS-60
|
RPSB60P600
|
RPSM60P600
|
RPSA60P400
|
RPSK60P355
|
|
VS-70
|
RPSB70P700
|
RPSM70P700
|
RPSA70P450
|
RPSK70P400
|
HORIZONTAL FAN OUTLET
Manufactured completely from corrosive resistant thermoplastic. Rectangular flanged connection and short splay cut outlet with mesh screen. Horizontal slide blade assists in regulating discharge velocity and fan volume flow. Suitable for Polyfan ‘B’ type rectangular flanged fan outlet.
|
Modello - Fan type
|
Tipo di Pressione - Pressure Type
|
|
B
|
M
|
A
|
AA
|
|
VS-14
|
TFSB14M*
|
-
|
-
|
-
|
|
VS-20
|
TFSB20M*
|
-
|
TFSA20M
|
TFSK20M
|
|
VS-23
|
TFSY25M*
|
-
|
-
|
-
|
|
VS-24
|
TFSB25M*
|
-
|
-
|
-
|
|
VS-25
|
TFSB25M*
|
TFSY25M*
|
TFSA25M
|
TFSK25M
|
|
VS-30
|
TFSB30M
|
TFSM30M
|
TFSA30M
|
TFSK30M
|
|
VS-35
|
TFSB35M
|
TFSM35M
|
TFSA35M
|
TFSK35M
|
|
VS-42
|
TFSB42M
|
TFSM42M
|
TFSA42M
|
TFSK42M
|
|
VS-50
|
TFSB50M
|
TFSM50M
|
TFSA50M
|
TFSK50M
|
|
VS-60
|
TFSB60M
|
TFSM60M
|
TFSA60M
|
TFSK60M
|
|
VS-70
|
TFSB70M
|
TFSM70M
|
TFSA70M
|
TFSK70M
|
FAN INLET
Manufactured completely from corrosive resistant thermoplastic. Diameter flexible coupler to connect standard diameter metric sections to the fan inlet. Assists in reducing transmitted vibration between fan and duct system. This accessory should be installed in every fume extraction system.
|
Cod. Art
Art. Code
|
Diametro
Diameter
|
Materiale
Material
|
|
GTX125P
|
Ø 125
|
PVC
|
|
GTX160P
|
Ø 160
|
PVC
|
|
GTX180P
|
Ø 180
|
PVC
|
|
GTX200P
|
Ø 200
|
PVC
|
|
GTX225P
|
Ø 225
|
PVC
|
|
GTX250P
|
Ø 250
|
PVC
|
|
GTX280P
|
Ø 280
|
PVC
|
|
GTX315P
|
Ø 315
|
PVC
|
|
GTX355P
|
Ø 355
|
PVC
|
|
GTX400P
|
Ø 400
|
PVC
|
|
GTX450P
|
Ø 450
|
PVC
|
|
GTX500P
|
Ø 500
|
PVC
|
|
GTX600P
|
Ø 600
|
PVC
|
|
GTX700P
|
Ø 700
|
PVC
|
MOTOR SHIELD
Manufactured completely from corrosive resistant thermoplastic. Designed for direct coupling to fan motor stool. Increases motor protection against external environmental factors.
|
Modello - Fan type
|
Tipo di Pressione - Pressure Type
|
|
B
|
M
|
A
|
AA
|
|
VS-14
|
CPMX14P
|
-
|
-
|
-
|
|
VS-20
|
CPMX20P
|
-
|
CPMX20P
|
CPMX20P
|
|
VS-23
|
CPMX25P
|
-
|
-
|
-
|
|
VS-24
|
CPMX25P
|
-
|
-
|
-
|
|
VS-25
|
CPMX25P
|
CPMX25P
|
CPMX25P
|
CPMX25P
|
|
VS-30
|
CPMX30P
|
CPMX30P
|
CPMX30P
|
CPMX30P
|
|
VS-35
|
CPMX35P
|
CPMX35P
|
CPMX35P
|
CPMX35P
|
|
VS-42
|
CPMX42P
|
CPMX42P
|
CPMX42P
|
CPMX42P
|
|
VS-50
|
CPMX50M
|
CPMX50M
|
CPMX50M
|
CPMX50M
|
|
VS-60
|
CPMX60M
|
CPMX60M
|
CPMX60M
|
CPMX60M
|
|
VS-70
|
CPMX70M
|
CPMX70M
|
CPMX70M
|
CPMX70M
|
TERMINAL DISCHARGE
With gravity non return flaps
Manufactured completely from corrosive resistant thermoplastic. Rectangular connection and short splay cut outlet with mesh screen. When the fan is switched off the gravity non return flaps prevent air from re-entering the fan outlet whilst reducing heat loss. Available with flanged connection for fan coupling.
|
Modello - Fan type
|
Tipo di Pressione - Pressure Type
|
|
B
|
M
|
A
|
AA
|
|
VS-14
|
TSGB14M*
|
-
|
-
|
-
|
|
VS-20
|
TSGB20M*
|
-
|
TSGA20M
|
TSGK20M
|
|
VS-23
|
TSGY25M*
|
-
|
-
|
-
|
|
VS-24
|
TSGB25M*
|
-
|
-
|
-
|
|
VS-25
|
TSGB25M*
|
TSGY25M*
|
TSGA25M
|
TSGK25M
|
|
VS-30
|
TSGB30M
|
TSGM30M
|
TSGA30M
|
TSGK30M
|
|
VS-35
|
TSGB35M
|
TSGM35M
|
TSGA35M
|
TSGK35M
|
|
VS-42
|
TSGB42M
|
TSGM42M
|
TSGA42M
|
TSGK42M
|
|
VS-50
|
TSGB50M
|
TSGM50M
|
TSGA50M
|
TSGK50M
|
|
VS-60
|
TSGB60M
|
TSGM60M
|
TSGA60M
|
TSGK60M
|
|
VS-70
|
TSGB70M
|
TSGM70M
|
TSGA70M
|
TSGK70M
|
HORIZONTAL FAN OUTLET
Diameter mesh
Round outlet with inclined discharge, with protective net to prevent accidents.. Manufactured completely from corrosive resistant thermoplastic.
|
Cod. Art
Art. Code
|
Diametro
Diameter |
Materiale
Material |
|
TER100P
|
Ø 100
|
PVC
|
|
TER125P
|
Ø 125
|
PVC
|
|
TER160P
|
Ø 160
|
PVC
|
|
TER200P
|
Ø 200
|
PVC
|
|
TER250P
|
Ø 250
|
PVC
|
|
TER315P
|
Ø 315
|
PVC
|
|
TER400P
|
Ø 400
|
PVC
|
|
TER500P
|
Ø 500
|
PVC
|
|
TER630P
|
Ø 630
|
PVC
|
SCROLL CONDENSE DRAIN
Diameter pipe section to drain condensation and solution. Manufactured in acid resistant polypropylene and directly welded to the lowest part of the fan housing.
|
Modello
Fan type
|
Diametro
Diameter
|
Tipo di Pressione - Pressure Type
|
|
B
|
M
|
A
|
AA
|
|
VS-14
|
ø 1/2"
|
SCCX20
|
-
|
-
|
-
|
|
VS-20
|
ø 1/2"
|
SCCX20
|
-
|
SCCX20
|
SCCX20
|
|
VS-23
|
ø 3/4"
|
SCCX30
|
-
|
-
|
-
|
|
VS-24
|
ø 3/4"
|
SCCX30
|
-
|
-
|
-
|
|
VS-25
|
ø 3/4"
|
SCCX30
|
SCCX30
|
SCCX30
|
SCCX30
|
|
VS-30
|
ø 3/4"
|
SCCX30
|
SCCX30
|
SCCX30
|
SCCX30
|
|
VS-35
|
ø 1"
|
SCCX42
|
SCCX42
|
SCCX42
|
SCCX42
|
|
VS-42
|
ø 1"
|
SCCX42
|
SCCX42
|
SCCX42
|
SCCX42
|
|
VS-50
|
ø 1 1/4"
|
SCCX70
|
SCCX70
|
SCCX70
|
SCCX70
|
|
VS-60
|
ø 1 1/4"
|
SCCX70
|
SCCX70
|
SCCX70
|
SCCX70
|
|
VS-70
|
ø 1 1/4"
|
SCCX70
|
SCCX70
|
SCCX70
|
SCCX70
|
INSPECTION DOOR
Flanged inspection door to aid inspection and cleaning operations. Manufactured in acid-resistant polypropylene or PVC with acid-resistant gaskets and fixings.
|
Modello - Fan type
|
Tipo di Pressione - Pressure Type
|
|
B
|
M
|
A
|
AA
|
|
VS-50
|
OBLB50
|
OBLM50
|
OBLA50
|
OBLK50
|
|
VS-60
|
OBLB60
|
OBLM60
|
OBLA60
|
OBLK60
|
|
VS-70
|
OBLB70
|
OBLM70
|
OBLA70
|
OBLK70
|
CONCRETE BASE
Concrete plinth incorporating galvanised steel supportsand anti-vibration isolator mounts. Designed for direct fixing of the fan simplifying and optimising the installation time avoiding builders work.
|
Modello - Fan type
|
Tipo di Pressione - Pressure Type
|
Peso
Weight
|
|
B
|
M
|
A
|
AA
|
|
VS-14
|
BSC01K
|
-
|
-
|
-
|
50 Kg
|
|
VS-20
|
BSC01K
|
-
|
BSC01K
|
BSC01K
|
50 Kg
|
|
VS-23
|
BSC01K
|
-
|
-
|
-
|
50 Kg
|
|
VS-24
|
BSC01K
|
-
|
-
|
-
|
50Kg
|
|
VS-25
|
BSC01K
|
BSC01K
|
BSC01K
|
BSC01K
|
50 Kg
|
|
VS-30
|
BSC01K
|
BSC01K
|
BSC01K
|
BSC01K
|
50 Kg
|
|
VS-35
|
BSC02K
|
BSC02K
|
BSC02K
|
BSC02K
|
100 Kg
|
|
VS-42
|
BSC02K
|
BSC02K
|
BSC02K
|
BSC02K
|
100 Kg
|
HORIZONTAL BRACKETS FOR WALL MOUNTING
Two galvanised arms suitable for bolting on the building fabric to provide a horizontal fixing platform for the fan.
|
Modello - Fan type
|
Tipo di Pressione - Pressure Type
|
Lungh.
Lenght
|
|
B
|
M
|
A
|
AA
|
|
VS-14
|
STFX14Z
|
-
|
-
|
-
|
210 mm
|
|
VS-20
|
STFX20Z
|
-
|
STFX25Z
|
STFX25Z
|
320 mm
|
|
VS-23
|
STFX25Z
|
-
|
-
|
-
|
420 mm
|
|
VS-24
|
STFX25Z
|
-
|
-
|
-
|
420 mm
|
|
VS-25
|
STFX25Z
|
STFX25Z
|
STFX25Z
|
STFX25Z
|
420 mm
|
|
VS-30
|
STFX30Z
|
STFX30Z
|
STFX30Z
|
STFX30Z
|
520 mm
|
ANTI VIBRATION MOUNTS
Vibration isolating mounts with threaded connections both sides. Assisting in reducing transmitted vibration between fan, stool and fume extract system. Shock absorbers with double threading.
|
Modello - Fan type
|
Tipo di Pressione - Pressure Type
|
|
B
|
M
|
A
|
AA
|
|
VS-14
|
VBR3030PM
|
|
|
|
|
VS-20
|
VBR4030PM
|
|
VBR4030PM
|
VBR4030PM
|
|
VS-23
|
VBR4030PM
|
|
|
|
|
VS-24
|
VBR4030PM
|
|
|
|
|
VS-25
|
VBR4030PM
|
VBR4030PM
|
VBR4030PM
|
VBR4030PM
|
|
VS-30
|
VBR4030PM
|
VBR4030PM
|
VBR4030PM
|
VBR4030PM
|
|
VS-35
|
VBR4030PM
|
VBR4030PM
|
VBR4030PM
|
VBR4030PM
|
|
VS-42
|
VBR4030PM
|
VBR4030PM
|
VBR4030PM
|
VBR4030PM
|
|
VS-50
|
VBR5045PM
|
VBR5045PM
|
VBR5045PM
|
VBR5045PM
|
|
VS-60
|
VBR5045PM
|
VBR5045PM
|
VBR5045PM
|
VBR5045PM
|
|
VS-70
|
VBR5045PM
|
VBR5045PM
|
VBR5045PM
|
VBR5045PM
|
DIAMETER DUCT RING CLIP BANDS
Supports made of galvanised steel to secure duct/components of the fume extract system (Set screws not included).
|
Cod. Art.
Art. Code
|
Diametro
Diameter
|
Materiale
Material
|
|
CLS100Z
|
ø 100
|
Acc. Zin/Galv. Iron
|
|
CLS125Z
|
ø 125
|
Acc. Zin/Galv. Iron
|
|
CLS160Z
|
ø 160
|
Acc. Zin/Galv. Iron
|
|
CLS200Z
|
ø 200
|
Acc. Zin/Galv. Iron
|
|
CLS250Z
|
ø 250
|
Acc. Zin/Galv. Iron
|
|
CLS315Z
|
ø 315
|
Acc. Zin/Galv. Iron
|
|
CLS400Z
|
ø 400
|
Acc. Zin/Galv. Iron
|
90° FABRICATED DIAMETER BEND
Manufactured from chemical resistant rigid PVC. Multi segment form assists in reducing system pressure losses and fan power. Connections are female socket one end and male spigot the other end.
|
Cod. Art.
Art. Code
|
Diametro
Diameter
|
Materiale
Material
|
Raggio
Radius
|
Peso
Weight
|
|
CRV200P90
|
ø 200
|
PVC
|
1,2 x ø
|
2 kg
|
|
CRV250P90
|
ø 250
|
PVC
|
1,2 x ø
|
2,5 Kg
|
|
CRV315P90
|
ø 315
|
PVC
|
1,2 x ø
|
5 Kg
|
|
CRV400P90
|
ø 400
|
PVC
|
1 x ø
|
9 Kg
|
|
CRV500P90
|
ø 500
|
PVC
|
1 x ø
|
-
|
|
CRV630P90
|
ø 630
|
PVC
|
1 x ø
|
-
|
90° DIAMETER ELBOW
Moulded from chemical resistant PVC. The homogeneous tubular form limits the trapping of condense and significantly reduces system pressure losses and fan power. Connections are female socket one end and male spigot the other end.
|
Cod. Art.
Art. Code
|
Diametro
Diameter
|
Materiale
Material
|
Raggio
Radius
|
Peso
Weight
|
|
GOM100P90
|
ø 100
|
PVC
|
0,5 x ø
|
0,4 Kg
|
|
GOM125P90
|
ø 125
|
PVC
|
0,5 x ø
|
0,5 Kg
|
|
GOM160P90
|
ø 160
|
PVC
|
0,5 x ø
|
0,8 Kg
|
|
GOM200P90
|
ø 200
|
PVC
|
0,5 x ø
|
1,2 Kg
|
|
GOM250P90
|
ø 250
|
PVC
|
0,5 x ø
|
3,2 Kg
|
45° FABRICATED DIAMETER BEND
Manufactured from chemical resistant rigid PVC. Multi segment form assists in reducing system pressure losses and fan power. Connections are female socket one end and male spigot the other end.
|
Cod. Art.
Art. Code
|
Diametro
Diameter
|
Materiale
Material
|
Raggio
Radius
|
Peso
Weight
|
|
CRV200P45
|
ø 200
|
PVC
|
1,2 x ø
|
1 Kg
|
|
CRV250P45
|
ø 250
|
PVC
|
1,2 x ø
|
1,5 Kg
|
|
CRV315P45
|
ø 315
|
PVC
|
1,2 x ø
|
2,5 Kg
|
|
CRV400P45
|
ø 400
|
PVC
|
1 x ø
|
4,5 Kg
|
|
CRV500P45
|
ø 500
|
PVC
|
1 x ø
|
-
|
|
CRV630P45
|
ø 630
|
PVC
|
1 x ø
|
-
|
45° DIAMETER ELBOW
Moulded from chemical resistant PVC. The homogeneous tubular form limits the trapping of condense and significantly reduces system pressure losses and fan power. Connections are female socket one end and male spigot the other end.
|
Cod. Art.
Art. Code
|
Diametro
Diameter
|
Materiale
Material
|
Raggio
Radius
|
Peso
Weight
|
|
GOM100P45
|
ø 100
|
PVC
|
0,5 x ø
|
0,3 Kg
|
|
GOM125P45
|
ø 125
|
PVC
|
0,5 x ø
|
0,4 Kg
|
|
GOM160P45
|
ø 160
|
PVC
|
0,5 x ø
|
0,7 Kg
|
|
GOM200P45
|
ø 200
|
PVC
|
0,5 x ø
|
1 Kg
|
|
GOM250P45
|
ø 250
|
PVC
|
0,5 x ø
|
2,5 Kg
|
Y SECTION DIAMETER BREECHES PIECE
Three way equal diameter breeches piece. Manufactured from chemical resistant rigid PVC. Segment form assists in reducing system pressure losses and fan power. Connections are female socket one end and male spigot the other two ends.
|
Cod. Art.
Art. Code
|
Diam.
ø1
|
Diam.
ø2
|
Diam.
ø3
|
Materiale
Material
|
|
BRA125125125P
|
125
|
125
|
125
|
PVC
|
|
BRA160200160P
|
160
|
200
|
160
|
PVC
|
|
BRA200250200P
|
200
|
250
|
200
|
PVC
|
|
BRA200315200P
|
200
|
315
|
200
|
PVC
|
|
BRA250250250P
|
250
|
250
|
250
|
PVC
|
|
BRA250315250P
|
250
|
315
|
250
|
PVC
|
|
BRA250355250P
|
250
|
355
|
250
|
PVC
|
|
BRA315400315P
|
315
|
400
|
315
|
PVC
|
REDUCING Y SECTION DIAMETER BREECHES PIECE
Three-way concentric equal reducing section. Manufactured from chemical resistant rigid PVC. Segment form assists in reducing system pressure losses and fan power. Connections are female socket one end and male spigot the other two ends
|
Cod. Art.
Art. Code
|
Diam.
ø1
|
Diam.
ø2
|
Diam.
ø3
|
Materiale
Material
|
|
BRC200100200P
|
200
|
100
|
200
|
PVC
|
|
BRC200160160P
|
200
|
160
|
160
|
PVC
|
|
BRC250100250P
|
250
|
100
|
250
|
PVC
|
|
BRC250160200P
|
250
|
160
|
200
|
PVC
|
|
BRC250200200P
|
250
|
200
|
200
|
PVC
|
|
BRC250250250P
|
250
|
250
|
250
|
PVC
|
|
BRC315200200P
|
315
|
200
|
200
|
PVC
|
|
BRC315200250P
|
315
|
200
|
250
|
PVC
|
|
BRC355250250P
|
355
|
250
|
250
|
PVC
|
|
BRC400250315P
|
400
|
250
|
315
|
PVC
|
REDUCER CONCENTRIC EQUAL REDUCING SECTION
Manufactured from chemical resistant rigid PVC. Used to connect sections of different diameters. Connections are female socket one end and male spigot the other end.
|
Cod. Art.
Art. Code
|
Diametro - Diameter
ø 1 / ø 2 - F / M
|
Materiale
Material
|
|
RID125100P
|
125/100
|
PVC
|
|
RID160125P
|
160/125
|
PVC
|
|
RID200125P
|
200/125
|
PVC
|
|
RID200160P
|
200/160
|
PVC
|
|
RID250200P
|
250/200
|
PVC
|
|
RID315200P
|
315/200
|
PVC
|
|
RID315250P
|
315/250
|
PVC
|
|
RID355250P
|
355/250
|
PVC
|
|
RID355315P
|
355/315
|
PVC
|
|
RID400315P
|
400/315
|
PVC
|
|
RID400355P
|
400/355
|
PVC
|
|
RID500400P
|
500/400
|
PVC
|
VENTILATION TUBE
Manufactured from chemical resistant rigid PVC. Used for fume exhaust systems where the presence of corrosive air is anticipated. Supplied in nominal 3m lengths, connections are female socket one end and male spigot the other end.
|
Cod. Art.
Art. Code
|
Diametro
Diameter
|
Materiale
Material
|
Lungh.
Lenght
|
Peso*
Weight
|
|
TB0100P
|
ø 100
|
PVC
|
3 m
|
2,5 Kg
|
|
TB0125P
|
ø 125
|
PVC
|
3 m
|
3,5 Kg
|
|
TB0160P
|
ø 160
|
PVC
|
3 m
|
6 Kg
|
|
TB0200P
|
ø 200
|
PVC
|
3 m
|
9 Kg
|
|
TB0250P
|
ø 250
|
PVC
|
3 m
|
12 Kg
|
|
TB0315P
|
ø 315
|
PVC
|
3 m
|
20 Kg
|
|
TB0400P
|
ø 400
|
PVC
|
3 m
|
28 Kg
|
|
TB0500P
|
ø 500
|
PVC
|
3 m
|
38 Kg
|
|
TB0630P
|
ø 630
|
PVC
|
3 m
|
63 Kg
|
MANUAL VOLUME CONTROL DUMPER
Used to manually regulate airflow in fume extraction duct systems optimising system performance and efficiency. Manufactured from chemical resistant rigid PVC. Connections are female socket one end and male spigot the other end.
|
Cod. Art.
Art. Code
|
Diametro
Diameter
|
Materiale
Material
|
Altezza
Height
|
Peso*
Weight
|
|
SRF100P
|
ø 100
|
PVC
|
190 mm
|
0,3 Kg
|
|
SRF125P
|
ø 125
|
PVC
|
190 mm
|
0,5 Kg
|
|
SRF160P
|
ø 160
|
PVC
|
240 mm
|
0,7 Kg
|
|
SRF200P
|
ø 200
|
PVC
|
240 mm
|
1 Kg
|
|
SRF250P
|
ø 250
|
PVC
|
300 mm
|
2 Kg
|
|
SRF315P
|
ø 315
|
PVC
|
400 mm
|
3,5 Kg
|
|
SRF400P
|
ø 400
|
PVC
|
450 mm
|
6 Kg
|
|
SRF500P
|
ø 500
|
PVC
|
550 mm
|
|
|
SRF630P
|
ø 630
|
PVC
|
680 mm
|
|
GRAVITY BACK DRAFT DAMPER
Manufactured from chemical resistant rigid PVC. It allows air only to flow in one direction through the duct system. When the fan is switched off the gravity non return flaps prevent air from re-entering the fan system and contribute to reducing heat loss. Connections are female socket one end and male spigot the other end.
|
Cod. Art.
Art. Code
|
Diametro
Diameter
|
Materiale
Material
|
Altezza
Height
|
Peso
Weight
|
|
SRV100P
|
ø 100
|
PVC
|
260 mm
|
|
|
SRV125P
|
ø 125
|
PVC
|
280 mm
|
0,5 Kg
|
|
SRV160P
|
ø 160
|
PVC
|
330 mm
|
0,7 Kg
|
|
SRV200P
|
ø 200
|
PVC
|
350 mm
|
1 Kg
|
|
SRV250P
|
ø 250
|
PVC
|
380 mm
|
2 Kg
|
|
SRV315P
|
ø 315
|
PVC
|
420 mm
|
3 Kg
|
|
SRV400P
|
ø 400
|
PVC
|
540 mm
|
3,5 Kg
|
|
SRV500P
|
ø 500
|
PVC
|
550 mm
|
|
MOTORISED VOLUME CONTROL DUMPER
Used to electrically/mechanically regulate airflow in fume extraction duct systems optimising system performance and efficiency. Manufactured from chemical resistant rigid PVC. Connections are female socket one end and male spigot the other end.
|
Cod. Art.
Art. Code
|
Diametro
Diameter
|
Materiale
Material
|
Altezza
Height
|
Motore
Motor
|
Peso
Weight
|
|
SRM160P024M
|
ø 160
|
PVC
|
240 mm
|
AC/DC 24 V
|
1,5 Kg
|
|
SRM200P024M
|
ø 200
|
PVC
|
240 mm
|
AC/DC 24 V
|
2 Kg
|
|
SRM250P024M
|
ø 250
|
PVC
|
300 mm
|
AC/DC 24 V
|
2,5 Kg
|
|
SRM315P024M
|
ø 315
|
PVC
|
400 mm
|
AC/DC 24 V
|
4,5 Kg
|
|
SRM400P024M
|
ø 400
|
PVC
|
450 mm
|
AC/DC 24 V
|
7,5 Kg
|
|
|
|
SRM160P230M
|
ø 160
|
PVC
|
240 mm
|
AC 230 V
|
2 Kg
|
|
SRM200P230M
|
ø 200
|
PVC
|
240 mm
|
AC 230 V
|
2,5 Kg
|
|
SRM250P230M
|
ø 250
|
PVC
|
300 mm
|
AC 230 V
|
3 Kg
|
|
SRM315P230M
|
ø 315
|
PVC
|
400 mm
|
AC 230 V
|
5 Kg
|
|
SRM400P230M
|
ø 400
|
PVC
|
450 mm
|
AC 230 V
|
8 Kg
|
MOTORISED OPEN/CLOSED CONTROL DAMPER
Used to electrically/mechanically open and close a fume extraction duct section to airflow. Manufactured from chemical resistant rigid PVC. Connections are female socket one end and male spigot the other end.
|
Cod. Art.
Art. Code
|
Diametro
Diameter
|
Materiale
Material
|
Altezza
Height
|
Motore
Motor
|
Peso
Weight
|
|
Apri/chiudi con apertura veloce - Open/closed with fast open
|
|
SRM160P230V25
|
ø 160
|
PVC
|
240 mm
|
AC 230 V
|
1,5 Kg
|
|
SRM200P230V25
|
ø 200
|
PVC
|
240 mm
|
AC 230 V
|
2 Kg
|
|
SRM250P230V25
|
ø 250
|
PVC
|
300 mm
|
AC 230 V
|
2,5 Kg
|
|
SRM315P230V25
|
ø 315
|
PVC
|
400 mm
|
AC 230 V
|
4 Kg
|
|
SRM400P230V25
|
ø 400
|
PVC
|
450 mm
|
AC 230 V
|
7 Kg
|
|
Apri/chiudi con ritorno a molla - Open/closed with return by spring
|
|
SRM160P230R
|
ø 160
|
PVC
|
240 mm
|
AC 230 V
|
2 Kg
|
|
SRM200P230R
|
ø 200
|
PVC
|
240 mm
|
AC 230 V
|
2,5 Kg
|
|
SRM250P230R
|
ø 250
|
PVC
|
300 mm
|
AC 230 V
|
3,5 Kg
|
|
SRM315P230R
|
ø 315
|
PVC
|
400 mm
|
AC 230 V
|
5 Kg
|
|
SRM400P230R
|
ø 400
|
PVC
|
450 mm
|
AC 230 V
|
8 Kg
|
DISCHARGE TERMINAL WITH RAIN SLEEVE
Vertical discharge with rain cowl to prevent rainwater from getting into the piping system. Completely manufactured in acid-proof PVC, it has a socket in one end.
|
Cod. Art.
Art. Code
|
Diametro
Diameter
|
Materiale
Material
|
Altezza
Height
|
Peso
Weight
|
|
CMN100P
|
ø 100
|
PVC
|
300 mm
|
0,5 Kg
|
|
CMN125P
|
ø 125
|
PVC
|
300 mm
|
0,5 Kg
|
|
CMN160P
|
ø 160
|
PVC
|
310 mm
|
1,5 Kg
|
|
CMN200P
|
ø 200
|
PVC
|
335 mm
|
2 Kg
|
|
CMN250P
|
ø 250
|
PVC
|
420 mm
|
2,5 Kg
|
|
CMN315P
|
ø 315
|
PVC
|
415 mm
|
4,5 Kg
|
|
CMN400P
|
ø 400
|
PVC
|
565 mm
|
-
|
|
CMN500P
|
ø 500
|
PVC
|
735 mm
|
-
|
ANTI-DOWNDRAFT AND ANTI-SAND CHIMNEY STACK
Vertical air discharge with protection structure to prevent sand from getting into the piping system. Its special shape provides protection against strong air gusts, facilitating the discharge of fumes. Manufactured in acid-proof PVC, it has a socket in one end.
|
Cod. Art.
Art. Code
|
Diametro
Diameter
|
Materiale
Material
|
Altezza
Height
|
Peso
Weight
|
|
CMN125PA
|
ø 125
|
PVC
|
335 mm
|
3,5 Kg
|
|
CMN160PA
|
ø 160
|
PVC
|
335 mm
|
4 Kg
|
|
CMN200PA
|
ø 200
|
PVC
|
335 mm
|
4,5 Kg
|
|
CMN250PA
|
ø 250
|
PVC
|
420 mm
|
5,5 Kg
|
|
CMN315PA
|
ø 315
|
PVC
|
415 mm
|
10 Kg
|
|
CMN400PA
|
ø 400
|
PVC
|
565 mm
|
-
|
|
CMN500PA
|
ø 500
|
PVC
|
735 mm
|
-
|
UPRIGHT CHIMNEY STACK
Upright air discharge with protective net to prevent foreign bodies from getting into piping system. With this chimney stacks fans can be assembled in groups. Manufactured in acid-proof PVC, it has a socket in one end
|
Cod. Art.
Art. Code
|
Diametro
Diameter
|
Materiale
Material
|
|
CMN100PW
|
ø 100
|
PVC
|
|
CMN125PW
|
ø 125
|
PVC
|
|
CMN160PW
|
ø 160
|
PVC
|
|
CMN200PW
|
ø 200
|
PVC
|
|
CMN250PW
|
ø 250
|
PVC
|
|
CMN315PW
|
ø 315
|
PVC
|
|
CMN400PW
|
ø 400
|
PVC
|
|
CMN500PW
|
ø 500
|
PVC
|
|
CMN630PW
|
ø 630
|
PVC
|
UPRIGHT CHIMNEY STACK WITH EXTENSION
Upright air discharge with extension to facilitate fume discharge, supplied with protective net. Fans can be assembled in groups. Manufactured in acid-proof PVC, it has a socket in one end.
|
Cod. Art.
Art. Code
|
Diametro
Diameter
|
Materiale
Material
|
|
CMN100PY
|
ø 100
|
PVC
|
|
CMN125PY
|
ø 125
|
PVC
|
|
CMN160PY
|
ø 160
|
PVC
|
|
CMN200PY
|
ø 200
|
PVC
|
|
CMN250PY
|
ø 250
|
PVC
|
|
CMN315PY
|
ø 315
|
PVC
|
|
CMN400PY
|
ø 400
|
PVC
|
|
CMN500PY
|
ø 500
|
PVC
|
|
CMN630PY
|
ø 630
|
PVC
|
SILENCER
Due to its acoustic insulation material the silencer reduces the noise produced by the fan. The “direct passage” manufacturing system guarantees substantial acoustic level damping without considerably increasing pressure losses. Manufactured in acid-proof PVC, it has a a socket in one end.
Installation
The silencer can be installed either in the aspiration or the discharge section, or in both positions, if needed. The installation examples below indicate that the silencer can be installed indoors or outdoors, either in horizontal or vertical position.
|
Cod. Art.
Art. Code
|
Ø
D
|
Ø
DE
|
LI
mm
|
LE
mm
|
Materiale
Material
|
Attenuaz. acustica dBA/ dBA Noise reduction
|
Peso
Weight
Kg
|
|
63
Hz
|
125
Hz
|
250
Hz
|
500
Hz
|
1K
Hz
|
2K
Hz
|
4K
Hz
|
8K
Hz
|
|
SLZ160P
|
160
|
315
|
500
|
700
|
PVC
|
-
|
1
|
4
|
8
|
13
|
12
|
7
|
4
|
-
|
|
SLZ180P
|
180
|
315
|
500
|
700
|
PVC
|
1
|
1
|
5
|
9
|
12
|
12
|
7
|
4
|
-
|
|
SLZ200P
|
200
|
355
|
500
|
700
|
PVC
|
1
|
2
|
5
|
9
|
13
|
12
|
7
|
5
|
9
|
|
SLZ250P
|
250
|
400
|
500
|
700
|
PVC
|
3
|
2
|
6
|
10
|
13
|
12
|
8
|
6
|
9,5
|
|
SLZ315P
|
315
|
500
|
750
|
950
|
PVC
|
2
|
3
|
7
|
10
|
13
|
12
|
9
|
9
|
18,5
|
|
SLZ355P
|
355
|
600
|
750
|
950
|
PVC
|
2
|
3
|
8
|
11
|
14
|
11
|
7
|
8
|
-
|
|
SLZ400P
|
400
|
700
|
1000
|
1200
|
PVC
|
3
|
3
|
8
|
11
|
14
|
11
|
7
|
7
|
-
|
|
SLZ500P
|
500
|
800
|
1000
|
1200
|
PVC
|
2
|
4
|
9
|
12
|
18
|
13
|
7
|
7
|
-
|
POLYSINK
Worktops, sinks and basins in anti-corrosion Polypropylene.
Polysink includes a vast range of models and sizes to make up worktops entirely of Polypropylene PP used in the chemical laboratories of Universities, Research Institutes, Schools, Industries, Hospitals and Pharmacies.
|
P3:
POLYSINK
PROFESSIONAL
POLIPROPILENE
THE GREATEST RANGE WORLDWIDE OF LABORATORY WORKTOPS AND SINKS IN POLYPROPYLENE
|
Polysink: corrosion-resistant worktops, sinks and basins:
Polysink is a new line of worktops, sinks and basins in polypropylene manufactured by Plastifer, a company with more than 50 years of experience working with anti-corrosion materials.
After significant investment in the research and development field, Plastifer has managed to develop a complete range of technologically state of the art moulded products.
Polysink includes a vast range of models and sizes to make up worktops entirely of Polypropylene PP used in the chemical laboratories of Universities, Research Institutes, Schools, Industries, Hospitals and Pharmacies.
|
Characteristics
-
Polypropylene PP is the ideal material to resolve corrosion problems thanks to its excellent resistance to acids, alkalines and base chemicals.
-
There is a range of worktop, sink, basin, bin and siphon modules such as to satisfy whatever need the customer may have.
-
The elegant Italian design makes for an excellent aesthetic effect.
-
The Polysink line is noted for lightness, ease of installation and anti-knock resistance.
-
Personalised worktops can be manufactured to suit customer requirements.
|
FILTERBOX
Anti-corrosion PVC filters with an active carbon system for air filtration and purification in aspiration plant.
Respect for the environment, the EEC directives, and the well-being of the people who work in laboratories are all factors that require the use of systems which hold back acids or solvents present in chemical processing discharges, with a resulting air purification. The FilterBox PVC activated carbon filters are the answer provided by Plastifer to the problem of air filtering.
|
The control of atmospheric emissions involves both the comfort and the ecological aspect of working environments. Respect for the environment, the EEC directives, and the well-being of the people who work in laboratories are all factors that require the use of systems which hold back acids or solvents present in chemical processing discharges, with a resulting air purification. The FilterBox PVC activated carbon filters are the answer provided by Plastifer to the problem of air filtering.
What is Activated Carbon
Activated carbon is a microporous granular carbon that can be produced with different raw material such as peat, wood or fossil coal. The activation process, carried out with vapour or chemical agents, produces millions of pores of molecular dimension that make up a great surface area with a ratio probably larger than 2,000 m2 per gram of activated carbon. Due to the Van Der Waals force, the carbon atoms present on the internal surface of the activated carbon attract the neighbouring gas molecules.
|
Theintensity of such phenomenon is related to the molecular structure of the suctioned substances; some molecules are strongly attracted whereas others are not. Due to this mechanism, activated carbon can be used to eliminate one or more components of a mixture.
Data to consider when choosing a filter:
Causes that reduce Carbon performance:
-
TEMPERATURE reduces the carbon adsorption capacity.The lower the temperature, the higher the Carbon adsorption capacity.
-
HUMIDITY has a negative influence on the carbon adsorption capacity since it can withstand a maximum relative humidity equal to 70%.
|
Useful recommendation:
-
The CONCTAT TIME between the air and the activated carbon is an important factor to consider; on the basis of the required result we suggest values that range between 0,05 sec. and 0,2 sec.
-
The activated carbon COMPACTNESS is a fundamental aspect that must be observed in order to achieve effective results. Plates and panels that are not compacted or that have great granulometric values cannot render good results.
-
The INSTALLATION of the activated carbon filter must enable it to work in depression.
-
The use of very small activated carbon filters should be discouraged.
|
|
Codice art.
Art. code
|
Portata
Capacity
m³/h
|
Perd.car.
Flow res.
mmH20
|
Carbone
Carbon type
|
Lastre
Plates
n°
|
Prefiltro
Prefilter
n°
|
Dimensioni
|
Peso
Weight
kg
|
|
A
|
B
|
H
|
L
|
ø
|
|
CARB001PN
|
150
|
20
|
NORMAL
|
1
|
1
|
322
|
295
|
295
|
375
|
125 M/F
|
6,1
|
|
CARB001PR
|
150
|
20
|
RBAA
|
1
|
1
|
322
|
295
|
295
|
372
|
125 M/F
|
6,3
|
|
CARB002PN
|
300
|
20
|
NORMAL
|
2
|
1
|
688
|
300
|
239
|
738
|
125 M/F
|
9
|
|
CARB002PR
|
300
|
20
|
RBAA
|
2
|
1
|
688
|
300
|
239
|
738
|
125 M/F
|
9,5
|
|
CARB004PN
|
600
|
21
|
NORMAL
|
4
|
1
|
500
|
320
|
600
|
1100
|
200 M/M
|
17,5
|
|
CARB004PR
|
600
|
21
|
RBAA
|
4
|
1
|
500
|
320
|
600
|
1100
|
200 M/M
|
18,5
|
|
CARB006PN
|
900
|
23
|
NORMAL
|
6
|
1
|
550
|
520
|
580
|
1200
|
250 M/M
|
22,5
|
|
CARB006PR
|
900
|
23
|
RBAA
|
6
|
1
|
550
|
520
|
580
|
1200
|
250 M/M
|
24
|
|
CARB008PN
|
1200
|
36
|
NORMAL
|
8
|
1
|
550
|
630
|
580
|
1200
|
250 M/M
|
28
|
|
CARB008PR
|
1200
|
36
|
RBAA
|
8
|
1
|
550
|
630
|
580
|
1200
|
250 M/M
|
30
|
|
CARB010PN
|
1500
|
30
|
NORMAL
|
10
|
1
|
550
|
780
|
580
|
1200
|
315 M/M
|
35,5
|
|
CARB010PR
|
1500
|
30
|
RBAA
|
10
|
1
|
550
|
780
|
580
|
1200
|
315 M/M
|
37,5
|
|
CARB012PN
|
1800
|
35
|
NORMAL
|
12
|
2
|
550
|
940
|
580
|
1250
|
315 F/M
|
43,5
|
|
CARB012PR
|
1800
|
35
|
RBAA
|
12
|
2
|
550
|
940
|
580
|
1250
|
315 F/M
|
46
|
|
CARB014PN
|
2100
|
38
|
NORMAL
|
14
|
2
|
550
|
1080
|
580
|
1350
|
315 F/M
|
46
|
|
CARB014PR
|
2100
|
38
|
RBAA
|
14
|
2
|
550
|
1080
|
580
|
1350
|
315 F/M
|
49
|
|
CARB016PN
|
2400
|
40
|
NORMAL
|
16
|
2
|
550
|
1200
|
580
|
1500
|
355 F/M
|
49
|
|
CARB016PR
|
2400
|
40
|
RBAA
|
16
|
2
|
550
|
1200
|
580
|
1500
|
355 F/M
|
52,5
|
|
CARB018PN
|
2700
|
40
|
NORMAL
|
18
|
3
|
550
|
1390
|
580
|
1500
|
355 F/M
|
54
|
|
CARB018PR
|
2700
|
40
|
RBAA
|
18
|
3
|
550
|
1390
|
580
|
1500
|
355 F/M
|
57,5
|
|
CARB020PN
|
3000
|
40
|
NORMAL
|
20
|
3
|
550
|
1550
|
580
|
1500
|
355 F/M
|
56,5
|
|
CARB020PR
|
3000
|
40
|
RBAA
|
20
|
3
|
550
|
1550
|
580
|
1500
|
355 F/M
|
61
|
|
CARB024PN
|
3600
|
40
|
NORMAL
|
24
|
3
|
1150
|
1020
|
510
|
1950
|
355 F/M
|
65
|
|
CARB024PR
|
3600
|
40
|
RBAA
|
24
|
3
|
1150
|
1020
|
510
|
1950
|
355 F/M
|
70
|
|
CARB028PN
|
4200
|
45
|
NORMAL
|
28
|
3
|
1180
|
1080
|
510
|
2020
|
400 F/M
|
72
|
|
CARB028PR
|
4200
|
45
|
RBAA
|
28
|
3
|
1180
|
1080
|
510
|
2020
|
400 F/M
|
78
|
|
CARB030PN
|
4500
|
45
|
NORMAL
|
30
|
3
|
1150
|
1160
|
510
|
1910
|
400 F/M
|
77
|
|
CARB030PR
|
4500
|
45
|
RBAA
|
30
|
3
|
1150
|
1160
|
510
|
1910
|
400 F/M
|
83
|
|
CARB040PN*
|
6000
|
45
|
NORMAL
|
40
|
6
|
1150
|
1012
|
1000
|
1990
|
500 F/M
|
112
|
|
CARB040PR*
|
6000
|
45
|
RBAA
|
40
|
6
|
1150
|
1012
|
1000
|
1990
|
500 F/M
|
120
|
|
CARB048PN*
|
7200
|
45
|
NORMAL
|
48
|
6
|
1150
|
1012
|
1000
|
2070
|
500 F/M
|
124
|
|
CARB048PR*
|
7200
|
45
|
RBAA
|
48
|
6
|
1150
|
1012
|
1000
|
2070
|
500 F/M
|
134
|
|
CARB060PN*
|
9000
|
45
|
NORMAL
|
60
|
6
|
1150
|
1050
|
1160
|
2030
|
600 F/M
|
141
|
|
CARB060PR*
|
9000
|
45
|
RBAA
|
60
|
6
|
1150
|
1050
|
1160
|
2030
|
600 F/M
|
153
|
|
CARB072PN*
|
10800
|
45
|
NORMAL
|
72
|
6
|
1100
|
1050
|
1390
|
2100
|
600 F/M
|
157
|
|
CARB072PR*
|
10800
|
45
|
RBAA
|
72
|
6
|
1100
|
1050
|
1390
|
2100
|
600 F/M
|
172
|
|
Ricambi/Spare Items
|
|
LSTKCN
|
Coppia lastre carbone / Carbon plates pair
|
NORMAL (CARB001)
|
235 x 290 x 16
|
1
|
|
LSTKCR
|
Coppia lastre carbone / Carbon plates pair
|
RBAA (CARB001)
|
235 x 290 x 16
|
1,1
|
|
LSTBCN
|
Lastra carbone / Carbon plate
|
NORMAL (CARB002-72)
|
580 x 235 x 16
|
1
|
|
LSTBCR
|
Lastra carbone / Carbon plate
|
RBAA (CARB002-72)
|
580 x 235 x 16
|
1.1
|
|
LSTBDA
|
Lastra prefiltro / Prefilter plate
|
CARB001
|
282 x 288 x 10
|
0,2
|
|
LSTBDB
|
Lastra prefiltro / Prefilter plate
|
CARB002
|
233 x 287 x 10
|
0,2
|
|
LSTBD
|
Lastra prefiltro / Prefilter plate
|
CARB004
|
580 x 285 x 10
|
0.4
|
|
LSTBD2
|
Lastra prefiltro / Prefilter plate
|
CARB006-CARB0072
|
500 x 500 x 24
|
0,7
|
FILTERKIT
Aspiration systems in small dimensions, made in PVC and polypropylene, resistant to chemical action with active carbon filtration systems.
Supplied with centrifugal aspirator made in acid-proof polypropylene, equipped with a high-performance fan statically and dynamically balanced; with acid-proof gaskets that provide protection against fume leakage. It is supplied with a three-phase, single-phase, adjustable, EEx-d or two-speed motor, and IP55 protection.
|
Activated carbon filter canister Filterkit Series
Small-sized aspiration system made in acid-proof polypropyleneand PVC, ideal to filter emissions of solvents, acids and tin plating fumes.
Supplied with centrifugal aspirator made in acid-proof polypropylene, equipped with a high-performance fan statically and dynamically balanced; with acid-proof gaskets that provide protection against fume leakage.
It is supplied with a three-phase, single-phase, adjustable, EEx-d or two-speed motor, and IP55 protection.
|
Air is filtered when it flows through an effective activated carbon filter placed inside the unit.
It has great adsorption capacity thanks to the carbon plates designed to filter gas discharge in laboratories, and which are exclusively produced and supervised for Plastifer by the world’s leading activated carbon producer.
The adjustable discharge connection can be positioned to conduct the airflow to the outside. The carbon plates can be easily replaced. This system has been specifically designed to suction vapours inside safety cabinets.
|
|
Codice art.
Art. code
|
Lastre
Plates
n°
|
Portata
Capacity
m³/h
|
TF/MF
|
Tipo Carbone
Carbon type
|
Dimensioni
Dimensions
mm
|
Peso
Weight
kg
|
|
FLKCN1M
|
1
|
150
|
MF
|
NORMAL
|
295 x 295 x 641 h
|
9
|
|
FLKCN1T
|
1
|
150
|
TF
|
NORMAL
|
295 x 295 x 641 h
|
9
|
|
FLKCR1M
|
1
|
150
|
MF
|
RBAA
|
295 x 295 x 641 h
|
9
|
|
FLKCR1T
|
1
|
150
|
TF
|
RBAA
|
295 x 295 x 641 h
|
9
|
|
FLKCN2M
|
2
|
300
|
MF
|
NORMAL
|
295 x 295 x 911 h
|
13
|
|
FLKCN2T
|
2
|
300
|
TF
|
NORMAL
|
295 x 295 x 911 h
|
13
|
|
FLKCR2M
|
2
|
300
|
MF
|
RBAA
|
295 x 295 x 911 h
|
13
|
|
FLKCR2T
|
2
|
300
|
TF
|
RBAA
|
295 x 295 x 911 h
|
13
|
|
Ricambi ed Accessori / Spare Items and Accessories
|
|
LSTKCN
|
Coppia lastra carbone / Carbon plates pair
|
NORMAL (FLKCN1)
|
235 x 290 x 16
|
1
|
|
LSTKCR
|
Coppia lastra carbone / Carbon plates pair
|
RBAA (FLKCR1)
|
235 x 290 x 16
|
1,1
|
|
LSTBCN
|
Lastra carbone / Carbon plate
|
NORMAL (FLKCN2)
|
580 x 235 x 16
|
1
|
|
LSTBCR
|
Lastra carbone / Carbon plate
|
RBAA (FLKCR2)
|
580 x 235 x 16
|
1,1
|
|
TMK01F
|
TIMEK - Timer avviso sostituzione lastre carbone - T = 12 mesi
TIMEK - Duration control for activated carbon plates - T = 12 months
|
|
CPT390MK
|
Capot anti-UV per installazione esterna (completa di staffe e viti)
Anti-UV cover for outside installation (with supports and screws)
|
1.3
|
NORMAL: for solvent
RBAA: for acid
TF: Three Phase V 380/415
MF: Single Phase V 220/240
Plastifer List of mixed products
5179000532 - FAN - VSB30 B RD 90° 1.10KW 4P M230V
FACTORY CODE:VSB30 B RD 90° 1.10KW 4P M230V
5179000792 - FAN - VSBL25 A LG 90° 2.20KW 2P T230/400V EEXDIIBT4
FACTORY CODE:VSBL25 A LG 90° 2.20KW 2P T230/400V EEXDIIBT4
BRAND :PLASTIFER
FACTORY DESIGNATION:FAN
FACTORY CODE: VSBL25 PP ATEX KW2,2/2900 3PH IP55 Ex-d IIB
BRAND :PLASTIFER
5179001280 - FAN - VSB14PP A LG 0° 0.18KW 2P M230V
FACTORY CODE:VSB14PP A LG 0° 0.18KW 2P M230V
5179001382 - FAN - VSB14PP B LG 90° 0.18KW 2P M230V
FACTORY CODE:VSB14PP B LG 90° 0.18KW 2P M230V
5179001430 - FAN - VSAL20 LG 0° 0.55KW 2P T230/400V EXII2/2GT4X
FACTORY CODE:VSAL20 LG 0° 0.55KW 2P T230/400V EXII2/2GT4X
5179002013 - FAN - VSB14PP A LG 135° 0.18KW 2P T230/400V
FACTORY CODE:VSB14PP A LG 135° 0.18KW 2P T230/400V
5179003040 - FAN - VSB20PP B LG 0° 1.10KW 2P T230/400V
FACTORY CODE:VSB20PP B LG 0° 1.10KW 2P T230/400V
5179003080 - FAN - VSB20PP LG 0° 1.10/0.18KW 2/4P T400V EEXDIIBT4
FACTORY CODE:VSB20PP LG 0° 1.10/0.18KW 2/4P T400V EEXDIIBT4
5179007160 - FAN - VSB23PP B LG 0° 0.55KW 4P T230/400V
FACTORY CODE:VSB23PP B LG 0° 0.55KW 4P T230/400V
5179007165 - FAN - VSB23PP B LG 225° 0.55KW 4P T230/400V
FACTORY CODE:VSB23PP B LG 225° 0.55KW 4P T230/400V
5179007210 - FAN - VSB23PP A RD 0° 0.18KW 6P M230V
FACTORY CODE:VSB23PP A RD 0° 0.18KW 6P M230V
5179007736 - FAN - VSB24PP B RD 270° 2.20KW 2P T230/400V
FACTORY CODE:VSB24PP B RD 270° 2.20KW 2P T230/400V
5179008062 - FAN - VSB20PP B LG 90° 0.18KW 4P M230V
FACTORY CODE:VSB20PP B LG 90° 0.18KW 4P M230V
5179009010 - TURBINE - 1VC.350X131X28RD POLYPROPYLENE VERT
FACTORY DESIGNATION:TURBINE
FACTORY CODE:1VC.350X131X28RD POLYPROPYLENE VERT
5179009012 - TURBINE - 1VC.350X131X24RD POLYPROPYLENE VERT
FACTORY DESIGNATION:TURBINE
FACTORY CODE:1VC.350X131X24RD POLYPROPYLENE VERT
5179009014 - TURBINE - 1VC.420X159X38RD POLYPROPYLENE VERT
FACTORY DESIGNATION:TURBINE
FACTORY CODE:1VC.420X159X38RD POLYPROPYLENE VERT
5179009053 - SCREW - PP TURBINE LOCK M6X30 SCREW ACC ZIN HEAD PP
FACTORY CODE:PP TURBINE LOCK M6X30 SCREW ACC ZIN HEAD PP
5179009770 - FAN VSB24PP LG 0° 2.20/0.55KW 2/4P T400V -
FACTORY DESIGNATION:FAN VSB24PP LG 0° 2.20/0.55KW 2/4P T400V
BRAND :PLASTIFER
5179009802 - TRANSFORMATION - RECTANGULAR/CIRCULAR ON VSB24/25
FACTORY DESIGNATION:TRANSFORMATION
FACTORY CODE:RECTANGULAR/CIRCULAR ON VSB24/25
Plastifer ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya http://www.imajteknik.com.tr/online-iletisim-formu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.