Electro-hydraulic actuator system
In compliace with customers specifications and international standards designed system for all requierements of control applications.
Simultaneous actuating of several, independent control valves with one hydraulic system.
Linear actuator force up to: 3.000.000 N
Rotary actuator torques up to: 700.000 Nm
Hydraulic actuators (self contained design)
The Reineke RKA electro hydraulic actuator is a self contained actuators type. All relevant components as motor-pump unit,piston, servo valve or proportional control valve and mechanical feedback are mounted inside the container.All pipings between those components are inside the container and therefore a total sealed system
Type RKAH: linear actuator
Type RKAD: rotary actuator
Self-Adapting-Control-Actuator Type:SARA
The last development of Reineke is represented by the Self-Adapting-Control-Actuator
Type:SARA, a field device which takes on the function of process engineering.
Product development has reached first field test
Linear actuator
Quarter Turn (Scotch-Yoke) actuator with control
The actuators work according to the scotch-Yoke Principle.
Due to the different output-torque curves each recommended torque can be ideally adjusted to suit the optimal working preformance.
The cage and fork is a welded steel construction and allows the use of all known actuator systems,
such as a manual drive, gas over oil system, hydraulic drive and solar drive.
Hydraulic cylinder
Construction and interpretation of special hydraulic cylinders for prevailing application.
The cylinders fulfil all requirements of control appliaction.
Linear actuator force up to: 3.000.000 N
Electronic pressure measuring
system DESY-3
DESY-3, the 3-channel pressure recording system replaces mechanical pressure switches in electro-hydraulic
actuator systems for activation of protection valves and fittings in accordance with TRD 421.
monitors independently all measurement circuits using 3-chanel construction
guarantees high operational safety and availability
Controled valves
The control valves are used when pressure and temperature must be precisely controlled.
For this function, we produce high quality control valves for power plant engineering and cyclical heat
production applications as nentioned below:
- Fossil fired conventional Power Plants
- Supercritical Power Plants
- Combined Cycle Power Plants
- Waste Incineration Plants
- Destalinization Plants
- Steam Processing Plants
- Applications in Pulp-and Paper Industry
Gas analyser: RBM 2000
The Reineke gas analyser RBM 2000 can be used to determine and output up tp 4 measurement.
Net or gross calorific value, wobbe-index, as well as density and minimum air requirement for all flammable gases that are used in industry.
The gas analyser RBM 2000 can be found in many applications:
· Gas turbines
· Blast furnaces plants
· Power plants
· Coke oven plants
· Steel-, glas- and procelaine industries
Gas analyser for Wobbe-Index, net calorific value and heat flow
The gas analyser for the wobbe-index can determine and output through a mechanical process one of three measurement:
· Net calorific value
· Wobbe-index
· Heat flow
This appliance is easy to use and will be fit in, if straghtforward mechanical measurements are desirable.