Rotary Systems, Inc

ROTARY SYSTEMS SEPARATES

Rotary Systems offers a standard range of Separates for customer built assemblies with their own

bearing arrangement or applications where a fully enclosed Capsule or Package Unit is impractical.

Our range of Separates is flexible enough to offer a solution for any application,

capable of transferring low level signals or low power up to 10 Amps. The entire line of separate

Slip Rings and Brush Blocks features a through bore for shaft mounting.

 

ROTARY SYSTEMS

SR001 12 RINGS SIGNAL

TO 3 AMPS

Part #

Rings

A Length

B Length

SR001-01004

4

      0.88 +/- .02

            0.75 +/- .02

SR001-01006          

6

      1.14 +/- .02

           1.03 +/- .02

SR001-01008

8

     1.40 +/- .02

           1.30 +/- .02

SR001-01012

12

     1.92 +/- .02

           1.85 +/- .02

Description

SR001 type separate slip ring & brush block sets were designed primarily for low voltage,

signal carrying applications making them ideal for use in test rigs or production equipment.

Electrical

  • No. of Rings: 4, 6, 8 or 12 standard.

  • Current: Signal level to 3 Amps per ring standard.

  • Voltage: up to 150 VDC standard.

  • Insulation Resistance: >200MΩ at 500 VDC.

  • Hipot: 500 VAC for 15 seconds (all combinations).

  • Electrical Noise: Less than 10 mΩ peak at 5 rpm.

Modificastions

  • Different numbers of rings to those shown.

  • Slipring can be bored/sleeved to suit shaft diameter.

  • Increased barrier heights for applications to 240 VAC.

  • Termination type & length to customers requirements.

  • Silver connections to minimise thermal errors.

  • Alternative contact materials for specific applications.

ROTARY SYSTEMS

SR002 20 RINGS SIGNAL

TO 7 AMPS

Part #

Rings

A Length

B Length

SR002-01004

4

1.25 +/- .02

1.00 +/- .02

SR002-01006

6

1.63 +/- .02

1.38 +/- .02

SR002-01008

8

2.00 +/- .02

1.75 +/- .02

SR002-01012

12

2.75 +/- .02

2.50 +/- .02

SR002-01018

18

3.88 +/- .02

3.63 +/- .02

SR002-01024

24

4.99 +/- .02

4.74 +/- .02

Description

SR002 type separate slip ring & brush block sets were designed primarily for low voltage,

signal carrying applications making them ideal for use in test rigs or production equipment.

Electrical

  • No. of Rings: 4, 6, 8, 12, 18 or 20 standard.

  • Current: Signal level to 7 Amps per ring standard.

  • Voltage: up to 150 VDC standard.

  • Insulation Resistance: >200MΩ at 500 VDC.

  • Hipot: 500 VAC for 15 seconds (all combinations).

  • Electrical Noise: Less than 10 mΩ peak at 5 rpm.

Modificastions

  • Different numbers of rings to those shown.

  • Slipring can be bored/sleeved to suit shaft diameter.

  • Increased barrier heights for applications to 240 VAC.

  • Termination type & length to customer requirements.

  • Silver connections to minimise thermal errors.

  • Alternative contact materials for specific applications.

ROTARY SYSTEMS

SR005 24 RINGS SIGNAL

TO 10 AMPS

Part #

Rings

A Length

B Length

SR005-01004

4

1.58 +/- .02

1.34 +/- .02

SR005-01006

6

2.05 +/- .02

1.81 +/- .02

SR005-01008

8

2.52 +/- .02

2.28 +/- .02

SR005-01012

12

3.46 +/- .02

3.23 +/- .02

SR005-01018

18

4.88 +/- .02

4.64 +/- .02

SR005-01024

24

6.30 +/- .02

6.06 +/- .02

Description

SR005 type slip rings are an extension of the smaller SR001 & SR002 type separate slip ring & brush block sets.

Designed for low voltage, signal and low power applications makes them ideal for use in test rigs or production equipment.

Electrical

  • No. of Rings: 4, 6, 8, 12, 18, 20 & 24 standard.

  • Current: Signal level to 10 Amps per ring standard.

  • Voltage: up to 150 VDC standard.

  • Insulation Resistance: >200MΩ at 500 VDC.

  • Hipot: 500 VAC for 15 seconds (all combinations).

  • Electrical Noise: Less than 10 mΩ peak at 5 rpm.

Modificastions

  • Slipring can be bored/sleeved to suit shaft diameter.

  • Increased barrier heights for applications to 240 VAC.

  • Termination type & length to customer requirements.

  • Silver connections throughout to minimise thermal errors.

  • Alternative contact materials for specific applications.

  • Different numbers of rings to those shown.

ROTARY SYSTEMS

SR006 24 RINGS SIGNAL

TO 10 AMPS

Part #

Rings

A Length

B Length

SR006-01004

4

1.58 +/- .02

1.34 +/- .02

SR006-01006

6

2.05 +/- .02

1.81 +/- .02

SR006-01008

8

2.52 +/- .02

2.28 +/- .02

SR006-01012

12

3.46 +/- .02

3.23 +/- .02

SR006-01018

18

4.88 +/- .02

4.64 +/- .02

SR006-01024

24

6.30 +/- .02

6.06 +/- .02

Description

SR006 type slip rings are an extension of the smaller SR001 & SR002 type separate slip ring & brush block sets.

Designed for low voltage, signal and low power applications makes them ideal for use in test rigs or production equipment.

Electrical

  • No. of Rings: 4, 6, 8, 12, 18, 20 & 24 standard.

  • Current: Signal level to 10 Amps per ring standard.

  • Voltage: up to 150 VDC standard.

  • Insulation Resistance: >200MΩ at 500 VDC.

  • Hipot: 500 VAC for 15 seconds (all combinations).

  • Electrical Noise: Less than 10 mΩ peak at 5 rpm.

Modificastions

  • Different numbers of rings to those shown.

  • Slipring can be bored/sleeved to suit shaft diameter.

  • Increased barrier heights for applications to 240 VAC.

  • Termination type & length to customer requirements.

  • Silver connections to minimise thermal errors.

  • Alternative contact materials for specific applications

ROTARY SYSTEMS

SR007 24 RINGS SIGNAL

TO 10 AMPS

Part #

Rings

A Length

B Length

SR007-01004

4

1.58 +/- .02

1.34 +/- .02

SR007-01006

6

2.05 +/- .02

1.81 +/- .02

SR007-01008

8

2.52 +/- .02

2.28 +/- .02

SR007-01012

12

3.46 +/- .02

3.23 +/- .02

SR007-01018

18

4.88 +/- .02

4.64 +/- .02

SR007-01024

24

6.30 +/- .02

6.06 +/- .02

Description

SR007 type slip rings are also an extension of the smaller SR001 & SR002 type separate slip ring & brush block sets.

Designed for low voltage, signal and low power applications makes them ideal for use in a variety of projects.

Electrical

  • No. of Rings: 4, 6, 8, 12, 18, 20 & 24 standard.

  • Current: Signal level to 10 Amps per ring standard.

  • Voltage: up to 150 VDC standard.

  • Insulation Resistance: >200MΩ at 500 VDC.

  • Hipot: 500 VAC for 15 seconds (all combinations).

  • Electrical Noise: Less than 10 mΩ peak at 5 rpm.

Modificastions

  • Different numbers of rings to those shown.

  • Slipring can be bored/sleeved to suit shaft diameter.

  • Increased barrier heights for applications to 240 VAC.

  • Termination type & length to customer requirements.

  • Silver connections to minimise thermal errors.

  • Alternative contact materials for specific applications.

ROTARY SYSTEMS

SR012 24 RINGS SIGNAL

TO 3 AMPS

Part #

Rings

A Length

B Length

SR012-00004

4

0.60 +/- .02

0.40 +/- .02

SR012-00006

6

0.74 +/- .02

0.54 +/- .02

SR012-00008

8

0.88 +/- .02

0.68 +/- .02

SR012-00012

12

1.16 +/- .02

0.96 +/- .02

SR012-00018

18

1.58 +/- .02

1.38 +/- .02

SR012-00024

24

2.00 +/- .02

1.80 +/- .02

Description

SR012 type separate slip ring & brush block sets were designed primarily for low voltage,

signal applications for use at low to medium speeds. Because of their compact size these are

 ideal for applications where a complete package or capsule type assembly is impractical.

Electrical

  • No. of Rings: 4, 6, 8, 12, 16, 18, 20 & 24 standard.

  • Current: Signal level to 3 Amps per ring standard.

  • Voltage: up to 210 VDC standard.

  • Insulation Resistance: >200MΩ at 500 VDC.

  • Hipot: 500 VAC for 15 seconds (all combinations).

  • Electrical Noise: Less than 10 mΩ - speed dependant

Modificastions

  • Different numbers of rings to those shown.

  • Slipring can be bored/sleeved to suit shaft diameter.

  • Increased barrier heights for applications to 240 VAC.

  • Termination type & length to customer requirements.

ROTARY SYSTEMS

SEALED SLIP RINGS

Our Sealed Slip Rings feature our standard Packaged Slip Rings manufactured within a sealed enclosure.

The protection class is typically IP65 but Rotary Systems will be happy to supply any Slip Ring sealed to suit your specific requirement.

Contact your Rotary Systems application engineer for more information.

 ROTARY SYSTEMS

SR011 36 RINGS SIGNAL

TO 7 AMPS

  • Silver Contacts

  • Sealed to IP65

  • Anodized Aluminum Enclosure

Part #

Rings

A Length

SR011-11004

4

3.43 +/- .02

SR011-11008

8

4.17 +/- .02

SR011-11012

12

4.92 +/- .02

SR011-11018

18

6.045 +/- .02

SR011-11024

24

7.17 +/- .02

SR011-11030

30

8.29 +/- .02

SR011-11036

36

9.41 +/- .02

Description

The SR011 series offers sealing to IP65 standard for the SR003 type packaged slip ring.

These sealed slip rings can be built using the standard components of the SR003 type unit with a very minimum lead time required.

Electrical

  • No. of Rings: 4, 8, 12, 20, 24, 30 & 36 standard.

  • Current: Signal level to 7 Amps per ring standard.

  • Voltage: up to 250 VDC standard.

  • Insulation Resistance: >200MΩ at 500 VDC.

  • Hipot: 500 VAC for 15 seconds (all combinations).

  • Electrical Noise: Better than 10 mΩ - speed dependent

Modificastions

  • Different numbers of rings to those shown.

  • Changes to drive/mounting to customer requirements.

  • Higher current & voltage capacity per ring.

  • Higher IP ratings available.

  • Termination type & length to customer requirements.

  • Alternative contact materials for specific applications

Rotary Systems, Inc

Rotary Systems' line of Packaged Slip Rings feature precious metal contacts for long reliability requiring little or no maintenance.

The entire range features a through bore for the routing of hydraulics,

pneumatics or shaft mounting and is capable of transferring low level control and data signals as well as low power with very low electrical noise.

Part #

Rings

A Length

SR003-11004

4

2.50 +/- .03

SR003-11006

6

2.88 +/- .03

SR003-11008

8

3.25 +/- .03

SR003-11012

12

4.00 +/- .03

SR003-11018

18

5.12 +/- .03

SR003-11024

24

6.24 +/- .03

SR003-11030

30

7.37 +/- .03

SR003-11036

36

8.49 +/- .03

SR003-11040

40

9.24 +/- .03

SR003-11050

50

11.11 +/- .03

Description

The SR003 type slip ring package unit has been designed specifically for

instrumentation purposes and is very popular for applications requiring long life

and low noise along with the ability to operate over a wide range of speeds.

Electrical

  • No.of Rings: 4,6,8,12,18,20,24,30,36,40&50 standard.

  • Current: Signal level to 7 Amps per ring standard.

  • Voltage: up to 250 VDC standard.

  • Insulation Resistance: >200MΩ at 500 VDC.

  • Hipot: 500 VAC for 15 seconds (all combinations).

  • Electrical Noise: Better than 10 mΩ - speed dependent

Modificastions

  • Different numbers of rings to those shown.

  • Changes to drive/mounting to customer requirements.

  • Higher current & voltage capacity per ring.

  • Higher speeds available with air cooling.

  • Termination type & length to customer requirements.

  • Alternative contact materials for specific applications.

Part #

Rings

A Length

SR008-10004

4

1.70 +/- .03

SR008-10008

8

1.70 +/- .03

SR008-10012

12

2.26 +/- .03

SR008-10018

18

2.82 +/- .03

SR008-10024

24

2.82 +/- .03

Description

SR008 type packaged slip rings were designed primarily for low voltage,

signal applications being run at low to medium speeds. The assembly has

a small through bore for concentric shaft mounting or for the passage of fluid or gas lines.

Electrical

  • No. of Rings: 4, 8, 12, 16, 20 & 24 standard.

  • Current: Signal level to 3 Amps per ring standard.

  • Voltage: up to 210 VDC standard.

  • Insulation Resistance: >200MΩ at 500 VDC.

  • Hipot: 500 VAC for 15 seconds (all combinations).

  • Electrical Noise: Better than 10 mΩ - speed dependent

Modificastions

  • Different numbers of rings to those shown.

  • Changes of shaft mounting to customer requirements.

  • Higher current & voltage capacity per ring.

  • Internally modified to customer requirements.

  • Termination type & length to customer requirements.

If the range of standard slip rings isn't quite what you're looking for, Rotary Systems specializes in custom designs to suit your application.

Our engineering staff will draw upon over 30 years experience in electrical slip rings to come up with exactly what you need.

Our team has been responsible for the design and manufacture of slip rings for all applications and markets, from miniature

slip ring capsules to large separates & assemblies with hundreds of circuits. Contact us with your specific needs. We have the solution you’re looking for.

Capsule Slip Rings

Our standard line of Capsule Slip Rings offer a range of fully enclosed assemblies with their own bearing arrangement in a compact size.

Able to transfer low level control & data signals as well as low power up to 10 Amps these units feature precious metal contacts for high reliability requiring little or no maintenance.

ROTARY SYSTEMS

SR009 72 RINGS SIGNAL

TO 2 AMPS

Part #

Rings

A Length

SR009-10024

24

2.97 +/- .02

SR009-10048

48

4.50 +/- .02

SR009-10072

72

6.03 +/- .02

Description

The SR009 Capsule Slip Ring has become a popular multi-purpose unit due to its compact size.

Suitable for signal or low power applications (with internal modifications) it features gold alloy wire

brushes with compatible gold rings. Units can be manufactured with a thru' bore of .099" for fluid or gas.

Electrical

  • No. of Rings: 24, 48 or 72 standard.

  • Current: 2 Amps per ring standard.

  • Voltage: up to 250 VDC standard.

  • Insulation Resistance: >200MΩ at 500 VDC.

  • Hipot: 500 VAC for 15 seconds (all combinations).

  • Electrical Noise: Less than 5 mΩ peak at 5 rpm.

Modificastions

  • Different numbers of rings to those shown.

  • Changes of mounting/drive to customer requirements.

  • Higher current & voltage capacity per circuit.

  • Internally modified to customer requirements.

  • Lead type & lengths to suit customer requirements.

ROTARY SYSTEMS

SR010 30 RINGS SIGNAL

TO 1 AMP

Part #

Rings

A Length

SR010-10006

6

1.12 +/- .02

SR010-10012

12

1.48 +/- .02

SR010-10018

18

1.84 +/- .02

SR010-10024

24

2.20 +/- .02

SR010-10030

30

2.56 +/- .02

Description

The SR010 Capsule Slip Ring offers long reliable life in a compact size. It features gold rings with compatible gold alloy wire brushes.

These capsules can be built in three lengths using standard components with a very minimum lead time required.

Electrical

  • No. of Rings: up to 30 standard.

  • Current: Signal level to 1 Amps per ring maximum.

  • Voltage: up to 150 VDC standard.

  • Insulation Resistance: >200MΩ at 500 VDC.

  • Hipot: 500 VAC for 15 seconds (all combinations).

  • Electrical Noise: Less than 5 mΩ peak at 5 rpm.

Modificastions

  • Different numbers of rings to those shown.

  • Longer leads to suit customer requirements.

ROTARY SYSTEMS

SR013 24 RINGS SIGNAL

TO 10 AMPS

Part #

Rings

A Length

SR013-10006

6

2.14 +/- .03

SR013-10012

12

3.07 +/- .03

SR013-10018

18

4.01 +/- .03

SR013-10024

24

4.94 +/- .0

Description

The SR013 Capsule Slip Ring is a multi-purpose unit. Suitable for signal or low

power applications it features multiple gold alloy wire brushes with compatible gold rings.

The unit has a through bore for concentric shaft mounting or for the passage of fluid or gas lines.

Electrical

  • No. of Rings: 6, 12, 18 or 24 standard.

  • Current: 10 Amps per ring standard.

  • Voltage: up to 600 VAC standard.

  • Insulation Resistance: >200MΩ at 1000 VDC.

  • Hipot: 1000 VAC for 15 seconds (all combinations).

  • Electrical Noise: Less than 5 mΩ peak at 5 rpm.

Modificastions

  • Different numbers of rings to those shown.

  • Changes of shaft mounting to customer requirements.

  • 5 inch O/D flange with 4 mounting holes on housing.

  • Higher current & voltage capacity per ring.

  • Internally modified to customer requirements.

  • Lead type & lengths to suit customer requirements.

Part #

Rings

A Length

SR014-10006

6

2.14 +/- .03

SR014-10012

12

3.07 +/- .03

SR014-10018

18

4.01 +/- .03

SR014-10024

24

4.94 +/- .03

Description

The SR014 Capsule Slip Ring is a multi-purpose unit. Suitable for signal or low

power applications it features multiple gold alloy wire brushes with compatible gold rings.

The unit has a through bore for concentric shaft mounting or for the passage of fluid or gas lines.

Electrical

  • No. of Rings: 6, 12, 18 or 24 standard.

  • Current: 10 Amps per ring standard.

  • Voltage: up to 600 VAC standard.

  • Insulation Resistance: >200MΩ at 1000 VDC.

  • Hipot: 1000 VAC for 15 seconds (all combinations).

  • Electrical Noise: Less than 5 mΩ peak at 5 rpm.

Modificastions

  • Different numbers of rings to those shown.

  • Changes of shaft mounting to customer requirements.

  • 5 inch O/D flange with 4 mounting holes on housing.

  • Higher current & voltage capacity per ring.

  • Internally modified to customer requirements.

  • Lead type & lengths to suit customer requirements.

Rotary Systems Industrial Slip Rings are manufactured to meet and exceed the harsh requirements of industrial use.

 These rugged assemblies have been designed and built for industrial applications and have been installed on cable reels,

in water treatment works and in wind turbines for the transfer of power. Rotary Systems can supply you with the solution you require for your industrial needs.

ROTARY SYSTEMS

SR004-36 SLIPRINGS

30 AMPS/600 VAC

  • Anodized Aluminum Enclosure

  • Threaded Terminals

Rotary Systems, Inc markasına ait tüm ürünler

    0 kayıt bulundu

      ALFABETİK MARKA LİSTESİ

      Ürün Gruplarına Göre Filtrele

      Sertifikalarımız

      Oruçreis Mah. Tekstilkent Tic. Mrk.
      G2 Blok, No:101 (10AD-Z77)
      34235 Esenler / ISTANBUL
      T: +90 212 235 95 35 / 36
      F: +90 212 235 95 37

      info@imajteknik.com

      E-Bülten Listemize üye olun !

      Gelişmelerden haberdan olmak ve ileride gerçekleştirilecek yeniliklerimizden haberdan olabilmek için e-posta adresinizi bizimle paylaşın!

      Copyright 2014 İmaj Teknik - Tüm hakları saklıdır.