Sapcon VITAL- Vibrating Fork Level Sensor/Switch for Solids

 Compact vibrating fork level switch for free-flowing solids, granules and powders

• Application Temperature Range : up to 200° C

• Fast Switching: 0.5s , 0.8s options available

• Calibration Free, independent of material's dielectric properties

• No moving parts, longer running life

• Outputs: DPDT Relay, Open Collector PNP Output

• Certifications: Flame Proof Housing IIC, IP-68 Housing

Sapcon ELIXIR- Tuning Fork Level Sensor/Switch for Liquids

Elixir-Liquid Level Switch for sticky, corrosive, agitated, splashing, foaming liquids, suitable for liquids with viscosity up to 10,000 cp

• Application Temperature Range : up to 200° C

• Calibration Free, independent of material's dielectric properties

• Output: 8.2V Namur, SPDT & DPDT Relay type current output

• ECTFE coated, polished & hygienic fork

• Threads, flanges and hygienic connection (Tri-Clamp)

• Extendable probe length from 68 to 3000 mm

• Certifications: Flame Proof Housing IIC, PESO, BIS, CCOE, EIL

Sapcon Elixir-T-Uni: Vibrating Fork Type Level Sensor for Liquids in Hygienic Applications

Elixir-T-Uni-Compact Tubular Vibrating Fork Level Limit Switch (suitable for all kinds of liquids having viscosity up to 10,000 cp & density greater than or equal to 0.7gm/cc)

• Application Temperature Range : Up to 150° C

• Certified EL Class I by EHEDG

• Enclosure : IP68 Weather Proof Housing

• Process connections: Threads and hygienic connection (Tri-Clamp)

• Wetted parts: SS 316, SS 316L with Hygienic finish (Ra < 0.8µ)

• Compact probe length 68 mm, 126 mm & up to 1000 mm

Sapcon Coat-Endure: RF-Admittance Level Switch/Sensor for Stick Solids and Liquids

Compact Admittance Level Limit switch for use in sticky solids, pastes and slurries where dielectric constant K > 2.5

• Application Temperature Range : up to 250° C

• Immune to application material build-up/coating

• Suitable for conductive and non-conductive application media

• Wetted Parts PTFE, SS 304 & SS 316

• Outputs: DPDT Relay, Open Collector PNP Output

• Probe length : 65 mm to 1500 mm

• Certifications : Flame Proof IIC & IP68 Housing

Sapcon CASPER : Compact Capacitive Level Switch

Compact Capacitance Level Limit switch for use in fine, coarse & bulky solids, non-sticky slurries and liquids where dielectric constant K > 2.5

• Application Temperature Range : up to 250° C

• Universal power supply: 18 - 55 V DC and 90 - 265 V AC

• Suitable for conductive and non-conductive application media

• Insulation: Part and Full PTFE

• Outputs: DPDT Relay, Open Collector PNP, Two Independent SPDT Relay, DPDT Relay with Pump Control Logic and Pump Control Logic with Single Independent Capacitance set point

• Probe length : 100 mm to 3000 mm

• Certifications : Flame Proof IIC & IP68 Housing

Sapcon Capvel-FUEL: Level Sensor/Transmitter for remote tracking of fuel

Fuel Level Sensor (use for vehicle tracking systems and DG sets)

• Application Temperature Range : 20 to 70°C

• In-built level to volume conversion

• Application guided installation and calibration

• Light in weight

• Wetted Parts: PTFE, Delrin & Aluminium

• Measurement accuracy : +/­ 1% FSL

• Response time : 1 to 5s (dynamic) 

• Process connections : SAE 5 mounting holes & 1″ BSP thread

• Probe length : 100 mm to 1500 mm, 

• Certifications : Flame Proof IIC & IP68 Housing

Sapcon SLA: RF Admittance Type Level Sensor with Buildup immunity

Admittance Level Limit Switch (Use media such as Low dielectric media e.g. cement, fly ash, clinkers, ESP hoppers)

• Application Temperature Range: Up to 1000°C

• Universal Power Supply: 18 to 55 V DC and 90 to 265 V AC at 50Hz

• Remotely mounted electronics upto 15 m

• Available in Integral & remote models

• Coating Immunity specially for sticky and viscous media

• Output: 1/2 SPDT Relay

• Available in Part & Full PTFE Insulation

• Certifications: Flame Proof IIA, IIB & IP65 Housing

• Available in rod & rope type

Sapcon SLA_B: RF Admittance Type Level Sensor for High Temperature Solids

Admittance Level Limit Switch (Use media such as cement, fly ash, ESP hoppers, powders, sand, sugar, pulverized coal, food grains)

• Application Temperature Range: Up to 1000°C

• Available in remote models

• Remotely mounted electronics for upto 50m

• Unaffected by coating specially for sticky and viscous media

• Wetted Parts: PTFE, Ceramic, Mild Steel, Galvanized Iron, SS 304, SS 310 & SS 316

• Output: 1/2 SPDT Relay with time delay

• Available in rod & rope probe type

•  Probe length: 250 mm to 10m

Sapcon SLA_S: RF Admittance Type Level Sensor with a split Sensor and Evaluation Unit

SLA Series - Admittance Level Limit Switch

• Application Temperature Range : Up to 250°C

• Available in Integral & split models

• Coating Immunity specially for sticky and viscous media

• Output: 1/2 SPDT Relay with time delay, Pump Control Logic

• Certifications: Flame Proof IIA, IIB & IP65 Housing

• Available only in full PTFE insulation

• Probe Type: Only in rod probe