SHOWA CORPORATION

SHOWA CORPORATION

Showa Automatic lubricators and cyclic lubricators.,
Showa Manual and pneumatic pumps.,
Showa Volumetric lubrication systems.,
Showa Resistance lubrication systems.,
Showa Progressive lubrication systems.,
Showa Lubrication injectors for oils and greases.,
Showa Oil-Air lubrication systems.,
Showa Spray systems.,

Oil lubrication system

Showa Corporation
Volumetric-motorized pump units

MLA※W Pressure Displacing Motor Pump

  • Volumetric type gear pump featuring a pressure displacement mechanism
  • Highly efficient and durable.  Various types / specifications available
  • Utilized in various volumetric type lubrication units

The “LW” pumps, MLA※W and MLB※W models, designed for centralized lubrication system units utilizing  the  volumetric  type  system,  are  small  gear  pumps  featuring  a  pressure  displacement mechanism.

The body and casing of the MLB※W model have been produced from die-cast aluminum and the functioning components have been designed to consume less space, allowing a significant reduction in product weight.

Manufacturer

MODEL CODE

Discharge
Pressure
(MPa)

Discharge Volume
(L/min)

Theoretical
Discharge
(c㎥/R)

Viscosity
Range
(m㎡/S)

Motor
Output × Pole
(W) × (P)

Current (A)

50Hz

60Hz

200V
(50Hz)

200V
(60Hz)

220V
(60Hz)

Showa

MLA015W

1.5

0.16

0.19

0.12

20~2000

25×4

0.26

0.27

0.27

Showa

MLA03W

0.28

0.33

0.2

20~1000

Showa

MLA03WT

2.0

0.3

0.36

0.12

20~2000

60×2

0.4

0.4

0.4

Showa

MLA05W

0.5

0.6

0.2

20~1000

※25W motor’s rating are 200, 220, 230Volts (50Hz – 0.26A) or 200, 220, 230, 240Volts (60Hz – 0.27A)

※Three phase 200 / 220V is standard, however, models can be made available to meet different power specifications.

※The MLB015W2, MLB015W3 and MLB03W2 are limited to single phase 100 / 200V power supplies.

※The ” ※ ” in the Specification table above, indicates a current level (A) utilizing a 200V single phase power supply.

※Class E insulation

※Pressure: 1kgf/c㎡ = 0.1MPa
Discharge Volume: 1cc/min = 1c㎥/min
Viscosity: 1cSt = 1m㎡/s

 

Showa Corporation
MLB※W Pressure Displacing Motor Pump

  • Volumetric type gear pump featuring a pressure displacement mechanism
  • Highly efficient and durable.  Various types / specifications available
  • Utilized in various volumetric type lubrication units

The “LW” pumps, MLA※W and MLB※W models, designed for centralized lubrication system units utilizing  the  volumetric  type  system,  are  small  gear  pumps  featuring  a  pressure  displacement mechanism.

The body and casing of the MLB※W model have been produced from die-cast aluminum and the functioning components have been designed to consume less space, allowing a significant reduction in product weight.

Manufacturer

MODEL CODE

Discharge
Pressure
(MPa)

Discharge Volume
(L/min)

Theoretical
Discharge
(c㎥/R)

Viscosity
Range
(m㎡/S)

Motor
Output × Pole
(W) × (P)

Current (A)

50Hz

60Hz

200V
(50Hz)

200V
(60Hz)

220V
(60Hz)

Showa

MLB015W

2.0

0.16

0.19

0.12

20~2000

25×4

0.26

0.27

0.27

Showa

MLB015W2

0.16

0.19

0.12

20~2000

※0.35

※0.35

Showa

MLB015W3

0.16

0.19

0.12

20~2000

20×4

※0.25

※0.25

Showa

MLB03W

0.28

0.33

0.2

20~1000

25×4

0.26

0.27

0.27

Showa

MLB03W2

0.28

0.33

0.2

20~1000

※0.35

0.35

※25W motor’s rating are 200, 220, 230Volts (50Hz – 0.26A) or 200, 220, 230, 240Volts (60Hz – 0.27A)

※Three phase 200 / 220V is standard, however, models can be made available to meet different power specifications.

※The MLB015W2, MLB015W3 and MLB03W2 are limited to single phase 100 / 200V power supplies.

※The ” ※ ” in the Specification table above, indicates a current level (A) utilizing a 200V single phase power supply.

※Class E insulation

※Pressure: 1kgf/c㎡ = 0.1MPa
Discharge Volume: 1cc/min = 1c㎥/min
Viscosity: 1cSt = 1m㎡/s

 

Showa Corporation
LCB3 Lubrication Unit

  • Motorized pump unit for the volumetric type system
  • Discharge timer option available (10 settings between 2 to 192 minutes)
  • General purpose pump unit

The LCB3 units are fitted with a die-cast aluminum 3.4L tank, cover, and flange.    IC timer (control board) fitted units can be adjusted to operate between 2 to 192 minutes.

These units are also fited with indicator lamps, enabling verification of operational status and errors.
Immediate oil distribution can be intiated manually, by pressing the “Instant Button”.

Manufacturer

MODEL
CODE

Pump
Utilized

Intermittence
(YT Timer Option)

Discharge Vol.
(L / minute)

Discharge
Pressure

Tank Capacity
(L)

Effective
Tank
Capacity  (L)

Viscosity
Range

Showa

LCB3

MLB01W1

2, 4, 6, 8, 16, 24, 32,
48, 64, 128, 192mins

0.1L – 50Hz
0.12L – 60Hz

1.2MPa

3.4

2

50~800
m㎡/s

※lubricant can be discharged by pressing the “Instant button”.   The pump will continue to operate until the button is released.

 

Showa Corporation
LCB3 (TMS) Lubrication Unit

  • TMS compliant – volumetric type automatic pump unit
  • Discharge frequency can be controlled by timer or impulse
  • Array of functions and features to suit various lubrication system requirements

The LCB3 TMS model lubrication unit possesses a controller which complies to the TMS standards.
The  unit’s  operation  (discharge  frequency  or  intermittence)  can  be  controlled  by  either  an
intermittence timer or an impulse count timer and may also be controlled from an external source.
Possessing a pressure switch & float switch, effective lubrication management can be undertaken

Manufacturer

MODEL CODE

Intermittence
(Impulse or mins)

Discharge Vol.
(L / minute)

Discharge
Pressure

Tank
Capacity
(L)

Effective
Tank
Capacity  (L)

Viscosity
Range

Warning
Triggers

Showa

LCB301

2, 4, 6, 8, 16, 24,
32, 48, 64, 128
(Can be modified)

0.1L – 50Hz
0.12L – 60Hz

1.5MPa

3.4

2

50~800
m㎡/s

Pressure surge,
pressure loss,
low oil levels

Showa

LCB302

5.5

4.4

Showa

LCB303

14.4

10.9

※Oil can be discharged by pressing the “Instant button”.   The pump will continue to operate until the button is released.

 

Showa Corporation
LCB4 Lubrication Unit

  • Motorized pump unit for the volumetric type system
  • Combines a MLB01W2 pump with a 2L tank
  • Lubrication unit without an IC timer (control board)

The LCB4 are a compact centralized lubrication unit supplied without an IC timer (control board).
LCB4 pump units are available with varying combinations of a pressure switch, pressure gauge or a float switch.   Requires connection to a timer system to enable intermittent operation.

Manufacturer

MODEL
CODE

Pump
Utilized

Discharge Vol.
(L / minute)

Discharge
Pressure

Tank Capacity
(L)

Effective Tank
Capacity  (L)

Viscosity
Range

Showa

LCB4

MLB01W2

0.1L / 0.12L
50Hz / 60Hz

1.2MPa

2

1.3

50~800
m㎡/s

※Lubricant can be discharged by pressing the “Instant button”.   The pump will continue to operate until the button is released.

 

Showa Corporation
LCB5 Lubrication Unit
  • Motorized pump unit for the volumetric type system
  • Combines the LCB4 unit with an IC timer, preddure gauge and float switch
  • A 2L plastic or die-cast aluminum tank and a 4L extended plastic tank are available

Based upon the LCB4 lubrication unit, the LCB5 are equipped with an IC timer (control board), a pressure switch, a float switch an Instant discharge button and an option to select a 4L extended plastic tank and / pressure gauge.
The intermittence time between discharges can be adjusted from a range of 2~180 minutes by simply altering the dip switch settings on the timer.

Manufacturer

MODEL
CODE

Intermittence
(Rest time in mins.)

Discharge Vol.
(L / minute)

Discharge
Pressure

Tank
Capacity
(L)

Effective Tank
Capacity  (L)

Viscosity
Range

Warning
Triggers

Showa

LCB50

2, 4, 6, 8, 10, 15, 20,
25, 30, 40, 50, 60,
90, 120, 150, 180

0.1L / 0.12L
50Hz / 60Hz

1.2MPa

2

1.3

50~800
m㎡/s

Pressure surge,
pressure loss,
low oil levels

Showa

LCB51

2

1.3

Showa

LCB52

4

1.9

※Lubricant can be discharged by pressing the “Instant button”.   The pump will continue to operate until the button is released.

 

Showa Corporation
LAW Hand Pump

  • Manually operated volumetric type pump
  • 2 types available, dispensing either 6cm3/stroke or 8cm3/stroke
  • Minimize wasted oil by dispensing fixed and measured quantities

The LAW hand pump is designed for use in a volumetric type system.   As oil can be dispensed by pulling upon the lever, installation and operation is simple.
2 sizes of LAW volumetric type hand pumps are available, which can dispense either 6cm3/stroke or 8cm3/stroke of oil.

Manufacturer

MODEL
CODE

Discharge Vol.
(c㎥/st)

Max. Discharge
Pressure  (MPa)

Discharge
Port Size

Tank
Capacity(L)

Effective Tank Capacity  (L)

Showa

LAW6

6

M10×1.0

0.35

0.25

Showa

LAW8DR(L)

8

4.0

Rc1/8

0.6

0.4

 

Showa Corporation
Volumetric-distributors

DPB Dester Plunger

  • Piston distributors for the volumetric type system
  • Distributes pre-measured volumes of oil utilizing the pump’s direct pressure

Utilizing the pump’s discharge pressure, the DPB model Dester Plunger distributes a pre-measured amount of oil from each port.
According to the Dester Plunger’s body size, model numbers of 0, 10, 20 and 30 are allocated.
Each model / size are available with various number of ports and discharge volumes.

 

Manufacturer

MODEL
CODE

Supply Connection

Outlet Connection

Supply
Nipple

Copper
Gasket

Rubber
Packing

Bushing

Sleeve

Sealing
Plugs

Bushing

Sleeve

Sealing
Plugs

Showa

DPB0Type

PA6

PB6

PG10C, PG10N
or PG006

φ3.2
PA3.2

φ3.2
PB3.2

PG8C

Showa

DPB10Type

PA6

PB6

PG10C, PG10N
or PG006

PA4

PB4

PG8C, PG004
or PG104

Showa

DPB20Type

φ6

PD612

311-0394

3-5885

PA6

PB6

PG12C or
PG12N

PA4

PB4

PG8C, PG004
or PG104

φ8

PD812

311-0394

3-5885

PA8

PB8

Showa

DPB30Type

φ6

PD612

311-0394

3-5885

PA6

PB6

PG12C or
PG12N

PA4

PB4

PG8C, PG004
or PG104

φ8

PD812

311-0394

3-5885

PA8

PB8

 

Showa Corporation
DSA, DSB Dester Block
  • Piston distributors for the volumetric type system
  • Distributes pre-measured volume of oil utilizing the piston’s spring pressure

Utilizing the internal spring’s decompressing force, the DSA & DSB model Dester Blocks distributes a pre-measured amount of oil from each port.
Dester Blocks with outlets on both sides of the supply chamber (DSA) and Dester Blocks with outlet ports only on one side (DSB) are available to accommodate various installation requirements.
Various number of ports, discharge volumes and an optional indicator pin to confirm oil discharge, are available with these distributors

Manufacturer

MODEL
CODE

Supply Connection φ6

Outlet Connection φ4

Bushing

Sleeve

Sealing
Plugs

Bushing

Sleeve

Sealing
Plugs

Showa

DSA Type

PA6

PB6

PA4

PB4

PG8 or
PG004

Showa

DSB Type

PA6

PB6

PG10 or
PG006

PA4

PB4

PG8 or
PG004

※Where ever possible, install Dester Plungers with the outlet ports facing upwards, as this will help remove air during installation.

※Minimize piping structures and equipment the distribution systemt which would apply substantial flow resistance.

※Ensure all plugs and connectors are tightly affixed and secured to prevent oil and pressure loss.

 
Showa Corporation
DPB20L Dester Plunger (Visual Indicator)
  • Dester Plunger with visual indicators to confirm operation
  • Discharge volumes of 0.1c㎥, 0.2c㎥, 0.4c㎥ and 0.6c㎥ per stroke are available

The DPB20L is a volumetric type piston distributor, utilizing the pump’s direct pressure to distribute a pre-measured amount of oil from each port.
This model possesses visual indicators to confirm operation.   As the pistons are pushed upwards by the stored oil within the cylinders, indicator pins protrude from atop of the Plunger.

Manufacturer

MODEL
CODE

Number of
Outlet Ports

Dimension

Operating
Pressure

Viscosity
Range

Connection Size

A

B

Inlet Port

Outlet Ports

Showa

DPB22L

2

46

0.8~3MPa

20~500
m㎡/S

M12×1.0

M8×1.0

Showa

DPB23L

3

17

63

Showa

DPB25L

5

51

97

Showa

DPB26L

6

68

114

Showa

DPB28L

8

102

148

Showa

DPB210L

10

136

182

※Recommended Viscosity: 20 to 500m㎡/S

 
Showa Corporation
DS Dester Block (Compact + Indicator)
  • Dester Block with visual indicators to confirm operation
  • Discharge volumes of 0.03c㎥, 0.05c㎥, 0.08c㎥ and 0.1c㎥ per stroke availablestroke are available

The DS models are a volumetric type piston distributor, utilizing the piston’s internal spring pressure to distribute a pre-measured amount of oil from each port.
Although the DS are based upon the DSB & DSA Dester Blocks, the DS are far more compact and are able to distribute smaller quantities of oil at higher levels of precision.

Manufacturer

MODEL
CODE

Number of
Outlet Ports

Dimension

Operating
Pressure

Applicable
Piping (Out)

Connection Size

A

B

Inlet Port

Outlet Port

Showa

DS2Z

2

34

47

1~3MPa

φ4

M10×1.0

M8×1.0

Showa

DS3Z

3

48

61

Showa

DS5Z

5

76

89

Showa

DS8Z

8

118

131

※Recommended Viscosity: 30 to 500m㎡/s

 


Resistance-motorized pump units

Showa Corporation
MLA Continuous Motor Pump

  • Gear pumps for continuous oil distribution systems
  • High levels of performance, safety and durability
  • Various types and specifications available to meet a wide variety of needs

The MLA pumps are designed for continuous / circulating oil distribution in resistance type systems, which have the added benefit of a cooling effect.
The compact automatic gear pump, featuring a relief valve, achieves high levels of performance, durability and safety.
10 flow-rate models (0.06L/min~10L/min) are available, enabling the MLA series to cover a very broad flow-rate spectrum.

Manufacturer

MODEL
CODE

Discharge
Pressure
(MPa)

Discharge Volume
(L/min)

Theoretical
Discharge
(cm3/R)

Viscosity
Range
(mm2/s)

Motor
Output × Pole
(W) × (P)

Current (A)

50Hz

60Hz

200V
(50Hz)

200V
(60Hz)

220V
(60Hz)

Showa

MLA006

0.3~1

0.05

0.06

0.038

20~2000

25×4

0.26

0.27

0.27

Showa

MLA015

0.16

0.19

0.12

20~2000

25×4

0.26

0.27

0.27

Showa

MLA03

0.28

0.32

0.2

20~1000

25×4

0.26

0.27

0.27

Showa

MLA05

0.3~1.5

0.5

0.6

0.2

20~1000

60×2

0.4

0.4

0.4

Showa

MLA05-5

0.3~0.5

0.5

0.57

0.36

20~500

25×4

0.26

0.27

0.27

Showa

MLA10

0.3~1.5

0.96

1.16

0.662

20~1000

200×4

1.34

1.12

1.17

Showa

MLA15

1.43

1.72

0.984

20~1000

Showa

MLA30

3.18

3.83

2.19

20~1000

400×4

2.2

1.93

1.95

Showa

MLA50

5.28

6.37

3.64

20~1000

Showa

MLA70

7.29

8.80

5.03

20~1000

750×4

3.6

3.3

3.2

Showa

MLA100

10.51

12.69

7.25

20~1000

※The  25W  motors  can  operate  using  200,  220,  230Volts
(50Hz – 0.26A) or 200, 220, 230, 240Volts (60Hz – 0.27A).

※3 phase 200V 50Hz, 200V 60Hz and 220V 60Hz are the standard.    Different power specifications also available.

※Class E insulation

※Ensure the motor rotates in the correct direction.

※Current (A) values conform to NIDEC (200W+ motors).

 
 
Showa Corporation
MLC Continuous Motor Pump
  • Simplified version of the MLA type gear pump for continuous oil distribution
  • Light weight and compact design, with high discharge rates of varying volumes

Manufacturer

MODEL
CODE

Discharge
Pressure(MPa)

Discharge
Vol. (L/min)

Outlet
Size (Rc)

Motor
Output × Pole

Current (A)

50Hz

60Hz

200V
(50Hz)

200V
(60Hz)

220V
(60Hz)

Showa

MLC051

0.5

0.51

0.59

1/4

25W × 4P

0.26

0.27

0.27

Showa

MLC101

0.5

0.93

1.06

1/4

25W × 4P

0.26

0.27

0.27

※The  25W  motors  can  operate  using  200,  220,  230Volts
(50Hz – 0.26A) or 200, 220, 230, 240Volts (60Hz – 0.27A).

※3 phase 200V 50Hz, 200V 60Hz and 220V 60Hz are the standard.    Different power specifications also available.

※Class E insulation

※After wiring, ensure the motor rotates in the correct direction.

※Current (A) values conform to NIDEC (motors above 200W).

 

Showa Corporation
MLD Continuous Motor Pump

  • Simplified version of the MLA type gear pump for continuous oil distribution
  • Light weight and compact design, with high discharge rates of varying volumes
  •  
Manufacturer

MODEL
CODE

Discharge
Pressure(MPa)

Discharge
Vol. (L/min)

Outlet
Size (Rc)

Motor
Output × Pole

Current (A)

50Hz

60Hz

200V
(50Hz)

200V
(60Hz)

220V
(60Hz)

Showa

MLD052

1.5

0.51

0.59

1/4

70W×4P

0.65

0.65

0.65

Showa

MLD102

1.5

0.93

1.06

1/4

70W×4P

0.65

0.65

0.65

Showa

MLD302

0.5

3.1

3.5

3/8

70W×4P

0.65

0.65

0.65

Showa

MLD304

1.5

3.2

3.8

3/8

200W×4P

1.34

1.12

1.17

Showa

MLD503

0.5

5.1

5.8

3/8

80W×4P

0.65

0.6

0.6

Showa

MLD505

1.5

5.3

6.4

3/8

400W×4P

2.2

1.93

1.95

Showa

MLD704

0.5

7.3

8.8

3/8

200W×4P

1.34

1.12

1.17

Showa

MLD705

1.5

7.3

8.8

3/8

400W×4P

2.2

1.93

1.95

Showa

MLD1004

0.5

10.5

12.7

3/8

200W×4P

1.34

1.12

1.17

Showa

MLD1005

1.5

10.5

12.7

3/8

400W×4P

2.2

1.93

1.95

※The  25W  motors  can  operate  using  200,  220,  230Volts
(50Hz – 0.26A) or 200, 220, 230, 240Volts (60Hz – 0.27A).

※3 phase 200V 50Hz, 200V 60Hz and 220V 60Hz are the standard.    Different power specifications also available.

※Class E insulation

※After wiring, ensure the motor rotates in the correct direction.

※Current (A) values conform to NIDEC (motors above 200W).

 

Showa Corporation
LITER UNIT (MLA, MLC, MLD) Continuous Lubrication Unit
  • Continuous distribution pump unit for the resistance type system

  • Lubrication unit with a combination of various attachments

  • Customizable design constructed to suit various lubrication requirements

Utilizing a high performance L series pump, an option to select the type of tank, float switch and pressure gauge have been provided to meet various lubrication requirements.    These units, used for  centralized  lubrication,  also  possess  an  added  benefit  of  a  cooling  effect  by  continuously supplying lubricants to the point of application.
Further options such as an outgoing check valve, line filter, magnet filter and micro-separators, can be attached to the unit.

 

Showa Corporation
YMAS Cycle Pump

  • An intermittent / cyclic pump unit for resistance type systems
  • 2 discharge volume types available, dispensing 1~3c㎥/cy or 3~㎥/cy
  • 7 cycle time types are available with cycle times of  1, 5, 10, 15, 30, 60 or 120 mins

Resistance type motorized pump unit, available in various cycle times with adjustable output volumes. 2 discharge volume types available, dispensing an adjustable discharge amount of either 1c㎥3~3c㎥ or 3c㎥~6c㎥ of oil.   The adjustable discharge volume further improves the pump’s efficiency.

Manufacturer

MODEL
CODE

Cycle Time
(minutes)

Discharge Vol.
(c㎥/cycle)

Max. Discharge
Pressure  (MPa)

Tank Capacity
(L)

Effective
Tank Capacity  (L)

Showa

YMAS3

1, 5, 10, 15,
30, 60 or 120

1~3 (Adjustable)

0.5

2

1.5

Showa

YMAS6

3~6 (Adjustable)

0.45

2

1.5

 

Showa Corporation
SMD Semi-Cycle Pump

  • A new model cyclic pump with a quick attaching / detaching tank
  • 2 discharge volume types available, dispensing 1~3c㎥/cy or 3~6c㎥/cy
  • 6 cycle time types are available with cycle times of  5, 10, 15, 30, 60 or 120 mins

The SMD model is a resistance type cyclic pump possessing a quick attaching / detaching tank, terminal board and a supply strainer as standard options.
Discharge volumes can be adjusted in 0.5c㎥ increments to suit lubrication requirements. Due to the flexibility and its ease of use, the SMD pumps are highly popular in many industries.

Manufacturer

MODEL
CODE

Cycle Time
(minutes)

Discharge Vol.
(c㎥/cycle)

Max. Discharge
Pressure  (MPa)

Tank Capacity
(L)

Effective
Tank Capacity  (L)

Showa

SMD3

5, 10, 15, 30,
60 or 120

1~3 (Adjustable)

0.3

2

1.5

Showa

SMD6

3~6 (Adjustable)

0.3

2

1.5

※The discharge volume can be adjusted in 0.5c㎥ increments.    Initial discharge settings are set to max. output levels.

※A Float Switch and an Instant Button cover are available as options.

 
 
Showa Corporation
SSMA Mini Semi-Cycle Pump
  • 2 discharge volume types available, dispensing 2c㎥/cy or 3c㎥/cy (fixed)
  • 6 cycle time types are available with cycle times of  5, 10, 15, 30, 60 or 120 mins
  • Compact unit with a 1L tank

The SSMA model is a cyclic pump based upon the SMD model, possessing the same motor and mechanisms.   However, the SSMA is far more compact with a 1L plastic tank, allowing the unit to be installed in areas where space is limited.
2 fixed discharge volume types are available, dispensing either a set volume of 2c㎥ or 3c㎥.

Manufacturer

MODEL
CODE

Cycle Time
(minutes)

Discharge Vol.
(c㎥/cycle)

Max. Discharge
Pressure  (MPa)

Tank Capacity
(L)

Effective
Tank Capacity  (L)

Showa

SSMA2

5, 10, 15, 30,
60 or 120

2

0.3

1

0.8

Showa

SSMA3

3

0.3

1

0.8

※Cycle times and discharge volumes are fixed and cannot be adjusted.

※An oil level detecting Float Switch can be attached to the unit.

 

Showa Corporation
MY6 Accumulator Pump

  • Accumulator pump dispensing an adjustable volume of oil up to 6c㎥ per cycle
  • Possesses an IC timer (control board) for intermittent lubrication (adjustable)
  • 3 types of tanks and the inclusion of a float switch is selectable

Utilizing an IC timer, the MY6 can be set to discharge oil from a range of selectable interval times. Possessing an “adjustment nut”, the discharge volume per cycle can be set between 1~6c㎥.
The maximum discharge pressure for any discharge volume setting is 0.5MPa.
The MY6 also possesses an “Instant Button”, enabling immediate discharge of oil when required.

Manufacturer

MODEL
CODE

Discharge
Pressure
(MPa)

Discharge
Volume
(c㎥/cy)

Intermittence Times
Selectable (mins)

Outlet
Port Size

Tank
Type &Capacity

Effective
Tank Cap.
(L)

Temp.
Range(℃)

Viscosity
Range
(m㎡/s)

× 1 Setting

× 10 Setting

Showa

MY60

0.5
Max

1~6
Adjustable

2, 4, 6, 8,
10, 12, 14,
16, 18

20, 40, 60,
80, 100, 120,
140, 160, 180

2 – Rc1/8
(One on each side)

2L Plast.

1.3

-10~+40

50~800

Showa

MY61

2L Alumi.

1.3

Showa

MY62

4L Plast.

2.9

 

Showa Corporation
MV Mini Liter Unit

  • Delivers small amounts of oil continuously
  • ・2 discharge volumes available, dispensing either 1.7c㎥/cy or 3.5c㎥/cy
  • Can be connected to the target machine’s timer system (control board) for extra operational control.

The  MV  motorized  pump  units  are  designed  to  continuously  lubricate  within  a  resistance  type system.    Unit can be supplied with a 2 liter aluminum or plastic tank.
Optional attachments are also available, including a needle valve and a float switch.

Manufacturer

MODEL
CODE

Discharge
Vol.  (c㎥/min)

Motor
Rotation(rpm)

Max. Discharge
Pressure  (MPa)

Tank Capacity

50Hz

60Hz

Showa

MV1

1.7

2.0

5

0.5

2L
(1.5L effective)

Showa MV3 3.5 4.2 10

※A needle valve and a float switch can be attached to the unit, slightly altering the specifications.

※Flow-rate can be adjusted on models fitted with the needle valve option.

 

LA Hand Pump

  • Resistance type manually operated pump
  • 3 types available, dispensing either 3c㎥/stroke, 6c㎥/stroke or 8cm3/stroke
  • Direct pressure type lever pump

The LA model is a simple to use hand pump.     Distribution of oil is induced by the direct force created upon pulling the lever.
3 types of LA hand pumps are available, dispensing either 3c㎥/stroke, 6c㎥/stroke or 8cm3/stroke, and are ideal for use in conjunction with Dester Valves (Resistance type distribution junctions).
2  types  of  LA8D  models  are  available.   The  LA8DR  and  the  LA8DL have  distribution  ports  on opposing sides, broadening installation capabilities.

Manufacturer

MODEL
CODE

Discharge
Vol.(c㎥/st)

Max. Discharge
Pressure  (MPa)

Discharge Port
Size

Tank Capacity
(L)

Effective
Tank Capacity  (L)

Showa

LAW6

3

1.5

M8×1.0

0.21

0.17

Showa

LAW8DR(L)

6

1.5

LA6-4=M8×1.0
LA6-6=M10×1.0

0.35

0.25

Showa

LAW8DR(L)

8

1.5

Rc1/8

0.6

0.4

※2 types of LA6 are available.   (LA6-4 for  Ø4 piping and LA6-6 for Ø6 piping).

※2 types of LA8D are available.   (LA8DR with discharge port on the right and LA8DL with discharge port on the left).

※The LA3 possesses a plastic tank, while the LA6 and LA8D are equipped with die-cast aluminum tanks.

 
 
Showa Corporation
LD Hand Pump
  • Spring pressure induced oil discharging hand pump
  • 2 types available, dispensing either 6c㎥/stroke or 8c㎥/stroke

The LD manual pump dispenses oil after the handle has been pulled and released, utilizing the force of the compressed spring inside.
Being a low pressure type hand pump, the LD model is ideal for use in conjunction with SHOWA’s Flow Proper Units (PSS, PST, etc).

Manufacturer MODEL
CODE
Discharge
Vol.(c㎥/st)
Max. Discharge
Pressure  (MPa)
Discharge Port
Size
Tank Capacity
(L)
Effective
Tank Capacity  (L)
Showa LD6 6 0.35 M8×1.0 0.35 0.22
Showa LD8 8 0.35 M8×1.0 0.6 0.37

 

Showa Corporation
HLA7 Hand Pump

  • Push lever type manual pump
  • Adjustable dispensing volume, ranging from 1c㎥/stroke to 7c㎥/stroke

Distribution of oil is induced by simply moving the lever up and down.   The HLA7 model has an adjustable dispensing volume of 1c㎥/stroke to 7c㎥/stroke, which can be set by adjusting the adjustment nut and stopper positioned next to the lever.
The pump is supplied with a 1L plastic tank and is available with levers facing either direction to suit installation and operational requirements.

 

Manufacturer MODEL
CODE
Discharge
Vol.(c㎥/st)
Max. Discharge
Pressure  (MPa)
Discharge Port
Size
Tank Capacity
(L)
Effective
Tank Capacity  (L)
Showa HLA7L (R) 1~7 0.3 M8×1.0 1 0.8

※The HLA7 pump’s initial discharge volume is set to 7c㎥/st.

※The “R” indicates the pump is to be mounted on the RIGHT in relation to the machine. (viewing from the front) Therefore, the pump’s mounting face is positioned on it’s left when the lever is held straight.

 

Showa Corporation
EA8 Hand Pump

Simply pulling and releasing the handle once, oil is discharged from the pump

Manufacturer

MODEL
CODE

Discharge
Vol.(c㎥/st)

Max. Discharge
Pressure(Mpa)

Discharge Port
Size

Tank Capacity
(L)

Effective
Tank Capacity  (L)

Showa

EA8 U(D) R(L)

8

0.35

M8 × 1.0 (Ø4 tube)

0.6

0.5

※The “L” (In Model Code above) indicates the pump will be mounted  on  the  LEFT  in  relation  to  the  target  machine (Viewing from front).    Only available for EA8 models.

※The  “U”  (In  Model  Code  above)  indicates  the  pump’s discharge  port  will  be  pointing  UP.    “D”  types  will  have outlets facing DOWN.    Only available for EA8 models.

※EA3 are only available with discharge ports facing upwards.

※The EA3 and EA8 models are equipped with a plastic and a die-cast aluminum tank, respectively.

 

Showa Corporation
 EA3 Hand Pump

Simply pulling and releasing the handle once, oil is discharged from the pump

Manufacturer

MODEL
CODE

Discharge Vol.
(c㎥/st)

Max. Discharge
Pressure(Mpa)

Discharge Port
Size

Tank Capacity
(L)

Effective
Tank Capacity  (L)

Showa

EA3

3

0.3

Rp1/8

0.16

0.14

※The “L” (In Model Code above) indicates the pump will be mounted  on  the  LEFT  in  relation  to  the  target  machine (Viewing from front).    Only available for EA8 models.

※The  “U”  (In  Model  Code  above)  indicates  the  pump’s discharge  port  will  be  pointing  UP.    “D”  types  will  have outlets facing DOWN.    Only available for EA8 models.

※EA3 are only available with discharge ports facing upwards.

※The EA3 and EA8 models are equipped with a plastic and a die-cast aluminum tank, respectively.

 

Resistance-distributors

Showa Corporation
FLOW PROPER UNITS

  • Resistance type distribution equipment for intermittent distribution systems

  • Various flow-rates available.    Flow-rate determined by flow numbers (00 to 5)

  • Various types available to cover a variety of connection possibilities

Flow Proper Units are to be installed within a resistant type system utilizing the intermittent / cyclic distribution method.    Flow Proper Units enable delivery of oil at a required flow rate and can be attached to Dester Units (Distribution Block) or individual lubrication points.
6 types of connector combinations are available, each with a selection of 7 oil flow rates.    As the classification number increases a step, the flow rate doubles, allowing flow manipulation.
These units are to be used in conjunction with accumulative pressure type pumps (ref. page 3). Flow Proper Units are not to be utilized with volumetric type pumps, grease pumps or LA type hand pumps.

 

Manufacturer

MODEL
CODE

Connection Size

Flow
Class

Flow
Value

Operating
Pressure  (MPa)

Recommended
Viscosity (m㎡/s)

Compatible Connectors

IN

OUT

IN

OUT

Showa

PSS Type

M8×1.0
(5/16 – 24NF)

M8×1.0
(5/16 – 24NF)

00

0.5

0.15~2

20~500

PAN4
(PAN4H)

PAN4
(PAN4H)

0

2

Showa

PST Type

M8×1.0
(5/16 – 24NF)

R1/8
(NPT1/8)

PAN4
(PAN4H)

#

1

4

Showa

PTS Type

R1/8
(NPT1/8)

M8×1.0
(5/16 – 24NF)

#

PAN4
(PAN4H)

2

8

Showa

PTT Type

R1/8
(NPT1/8)

R1/8
(NPT1/8)

#

#

3

16

Showa

KPB Type

R1/8
(NPT1/8)

4

32

Showa

KPF Type

R1/8
(NPT1/8)

5

64

※Flow-rate doubles every increment in the unit’s flow classification number from 0 onwards.  (Flow-rate of 00 is 1/4 of 0)

※Flow Proper Units are available in inch sizes.   Size displayed in (  ), a “H” will be added to the end of the model code.

※The “#” displayed in the “Compatible Connectors / Parts” column indicates that any piping connector that can connect to Rc1/8 and Rp1/8 connections can be used.

※PSS Flow Proper Units for Ø3.2 pipe size are available. (PSS※K)

 

Showa Corporation
CONTINUOUS UNITS (Grease System Compatible)

  • Resistance type distribution equipment for continuous distribution systems

  • Various flow-rates available.    Flow-rate determined by flow numbers (1 to 5)

Continuous  Units  can  be  used  for  either;    the  resistant  type  system  utilizing  the  continuous distribution method or in grease distribution systems.   Continuous Units allow a controlled delivery of oil or grease and can be attached to Dester Units (DA / DB distribution blocks) or individual lubrication points.
3 types of connector combinations are available (CSS, CST and CTT), each with a selection of 5 oil / grease flow rates.     As the classification number increases a step, the flow rate doubles, enabling flow manipulation to the desired effect.
Continuous Units are not to be utilized in conjunction with volumetric type pump (pressure displacement mechanisms).

Manufacturer

MODEL
CODE

Connection Size

Flow
Class

Flow
Value

Operating
Pressure  (MPa)

Recommended
Viscosity(m㎡/s)

Compatible Connectors

IN

OUT

IN

OUT

Showa

CSS Type

M8×1.0
(5/16 – 24NF)

M8×1.0
(5/16 – 24NF)

1

1.2

0.15~2

20~500

PAN4
(PAN4H)

PAN4
(PAN4H)

2

2.5

Showa

PST Type

M8×1.0
(5/16 – 24NF)

R1/8
(NPT1/8)

PAN4
(PAN4H)

3

5.0

Showa

PTS Type

R1/8
(NPT1/8)

R1/8
(NPT1/8)

4

10.0

PAN4
(PAN4H)

5

20.0

※Flow-rate doubles every increment in the unit’s flow classification number.

※Continuous Units are available in inch sizes.  Size displayed in (  ), a “H” will be added to the end of the model code.

※The “#” displayed in the “Compatible Connectors / Parts” column indicates that any piping connector that can connect to Rc1/8 and Rp1/8 connections can be used.

※In situations where Continuous Units are to be used for grease lubrication systems, CSS models should be selected.

 

Showa Corporation
VA, VB Dester Valve

  • Resistance type distribution junctions with flow adjustable valves

  • Each port can be adjusted to produce varying flow rates

  • VA possess outlets on both sides, VB possess outlets on a single side

Dester Valves are flow adjustable resistance type distribution junctions, compatible with intermittent / cycle or continuous oil distribution systems.
The VA type have outlets on each side of the main chamber (total of 4 to 16 ports) and the VB type have outlets on one side (total of 2 to 8 ports). “BO” Body Only versions without check vales on outlet ports are also available

Manufacturer

MODEL
CODE

Number of
Outlet Ports

Distribution Type
(Outlet Position)

Operating
Pressure(MPa)

Connection Size

Inlet Port

Outlet Ports

Showa

VA4-4(6)

4

Dual Sided

0.1~1.5

M8 × 1.0
(M10 × 1.0)

M8 × 1.0
(M10 × 1.0)
“BO” Type = Rp1/8

Showa

VA6-4(6)

6

Showa

VA10-4(6)

10

Showa

VA16-4(6)

16

Showa

VB2-4(6)

2

Single Sided

Showa

VA4-4(6)

4

Showa

VA6-4(6)

6

Showa

VA8-4(6)

8

 

Piping parts

Showa Corporation
FHS, FHC, FSC Flexible Hoses

  • Ideal for use in sliding and rotating environments
  • Possessing a protective spring, the hoses are durable and can be utilized in broad temperature ranges
  • Variety of lengths available to suit installation requirements
 

Showa Corporation
PIPES & TUBES Metal & Polymer Tubes

  • Pipes and tubes for distribution channels
  • Various materials and sizes available to meet installation requirements

A wide range of pipes and tubes for distributing lubricants are available.
3 types of metal pipes (Copper, Aluminum and Steel) and 3 polymer based pipes (Nylon, Hizex and Surlyn) in various sizes are available to meet various system and installation requirements

 

Tanks

Showa Corporation
TD Bottom Mount Welded Steel Tanks

  • Floor / bottom mounting type welded steel tanks available in various sizes

  • Oil gauges and drains are fitted to promote and simplify effective maintenance

Manufacturer

MODEL
CODE

L

W

H

D

A

B

C

E

F

全容量(ℓ)

Showa

TD4

220

140

180

170

230

120

250

1/8

9.2×11

3.6

Showa

TD5

220

160

180

170

230

120

250

1/8

4.3

Showa

TD6

300

170

180

170

310

140

330

1/8

6.0

Showa

TD12

370

230

180

170

370

210

390

1/8

10.9

Showa

TD15

350

210

260

250

360

190

380

1/4

14.3

Showa

TD20

350

210

350

340

360

190

380

1/4

19.5

※Oil capacity displayed, is the amount of oil which can be held from the bottom to the top of the tank.

※Tanks with over 15L capacities have 2 oil level gauges.

※Various lids for different applications available for each tank.

 

Showa Corporation
TY Side Mount Welded Steel Tanks

  • Wall / side mounting type welded steel tanks available in various sizes
  • Oil gauges and drains are fitted to promote and simplify effective maintenance
  • Robust design and structure

 

Manufacturer

MODEL
CODE

L

W

H

D

A

B

C

F

Capacity  (L)

Showa

TY3

180

130

147

140

200

110

220

137

3.1

Showa

TY12

370

230

390

410

237

11.5

Showa

TY15

350

210

220

213

370

180

390

217

15.2

Showa

TY20

290

283

250

20.0

※Oil capacity displayed, is the amount of oil which can be held from the bottom to the top of the tank.

※Tanks with over 15L capacities have 2 oil level gauges.

※Various lids for different applications available for each tank.

 

Grease lubrication system

Showa Corporation
Equipment for proceeding system

Motorized Greese Pump GPM

Manufacturer

MODEL CODE

Discharge
Volume
(c㎥/min)

Maximum
Discharge
(Mpa)

Outlet
Port
Size

Grease Capacity

Grease
Container
Type

Operating
Temp.
Range

Applicable
Grease
Grade

Nominal
(c㎥)

Effective
(c㎥)

Showa

GPM1013

10@50Hz
12@60Hz
10@DC24V

14

2 – Rc1/4
(Select
1 Port)

300

300

Grease Cup

0~40℃

NLGI
No.000~2

Showa

GPM1018

800

800

Showa

GPM1014

400

400
(368g)

Cartridge

Showa

GPM1017

700

700
(644g)

Showa

GPM1010

1000

1087
(1000g)

Showa

GPM1023

10@50Hz
12@60Hz
10@DC24V

21

2 – Rc1/4
(Select
1 Port)

300

300

Grease Cup

0~40℃

NLGI
No.000~2

Showa

GPM1028

800

800

Showa

GPM1024

400

400
(368g)

Cartridge

Showa

GPM1027

700

700
(644g)

Showa

GPM1020

1000

1087
(1000g)

※Contact SHOWA if NLGI #2 grease is to be utilized.
※Please use our recommended greases or one of SHOWA’s system specific greases.
※Avoid using different types of greases together. Do not mix different greases.
※Optional terminal board available for DC motor units. AC motor units are supplied with terminal boards installed.

 

Showa Corporation
Motorized sign Pump MHG4

Manufacturer

MODEL CODE

Discharge Vol.
(c㎥/min)

Max. Discharge
Pressure (Mpa)

Outlet
Port Size

Container & Capacity
(c㎥)

Operating
Temp. Range

Applicable
Grease

Showa

MHG41

4.5 @ 50Hz
5.5 @ 60Hz
4.5 @ DC24V

12

2 – Rc1/8
(Select 1 Port)

Cartridge 400

-5~40℃

NLGI
No.000~1

Showa

MHG42

Grease Cup 300

※Please use our recommended greases or one of SHOWA’s system specific greases.
※Avoid using different types of greases together. (Do not mix)

 

Showa Corporation
Motorized sign Pump MHG7

Manufacturer

MODEL CODE

Discharge Vol.
(c㎥/min)

Max. Discharge
Pressure (Mpa)

Outlet
Port Size

Container & Capacity
(c㎥)

Operating
Temp. Range

Applicable
Grease

Showa

MHG71

7.5 @ 50Hz
9.0 @ 60Hz

14

2 – Rc1/8
(Select 1 Port)

Cartridge 400

-5~40℃

NLGI
No.000~1

Showa

MHG72

Grease Cup 300

※Please use our recommended greases or one of SHOWA’s system specific greases.

※Avoid using different types of greases together.  (Do not mix)
 

Showa Corporation
Manual Grease Pump GPH

Manufacturer

MODEL CODE

Discharge
Volume
(c㎥/stroke)

Maximum
Discharge
(Mpa)

Outlet
Port
Size

Pressure
Displacement
Method

Grease
Capacity
(c㎥)

Grease
Container
Type

Applicable
Grease
Grade

Showa

GPH01※3

1.0

14
(GPH01R
Relief Valve
Installed)

2 – Rc1/4
(Select
1 Port)

Manually
(Lever)

300

Grease Cup

NLGI
No.000~2

Showa

GPH01※8

800

Showa

GPH01※4

400

Cartridge

Showa

GPH01※7

700

Showa

GPH01※0S

1000

※Contact SHOWA if NLGI #2 grease is to be utilized.

※Please use our recommended greases or one of SHOWA’s system specific greases.

※Avoid using different types of greases together. Do not mix greases.

※1000c㎥ cartridge can be used in the GPH01※7, as long as no supply assisting spring is installed.

 
Showa Corporation
Manual Sign Pump SHG
Manufacturer

MODEL CODE

Discharge
Volume
(c㎥/stroke)

Maximum
Discharge
(Mpa)

Outlet
Port
Size

Supply
Port
Size

Grease
Capacity
(c㎥)

Grease
Container
Type

Applicable
Grease
Grade

Showa

SHGD6

0.6

10

Rc1/8

Rp1/8

300

Grease Cup

NLGI
No.000~1

Showa

SHGD61

400

Cartridge

Showa

SHG12

1

300

Grease Cup

Showa

SHG121

400

Cartridge

※Ensure high quality lithium greases with a NLGI grade of 00, 0 or 1 are utilized with the pump unit.

※Avoid using different types of greases together.      Do not mix greases.

※Though the SHG pumps have 2 discharge ports on either side of the handle, the left port is sealed  with a plug.

※The SHG pumps have 2 return / supply ports, which can be connected to unused ports on a distribution block, allowing excess grease to return to the pump for later distribution.

※By pulling upon the lever, grease is discharged. Ensure a full motion is achieved before returning it to its original position.

 

Showa Corporation 
Dester G SG2

 
Dester G SG6
Manufacturer

MODEL CODE

Number of
Outlets

Discharge Volume
Per Port

Connection
Sizes

Max. Operating
Pressure (Mpa)

Applicable
Grease

Showa

SG604

4

0.3㎥/st
Can be increased
using a PSG
attachment

Supply Port
Rc1/8
Outlet
M10 × 1.0

14

NLGI
No.00~1

Showa

SG606

6

Showa

SG608

8

Showa

SG610

10

Showa

SG612

12

※The SG unit will not operate if any distribution port(outlet) is sealed. Use a PSG or install a return line to the grease pump.

※A single port will discharge 0.3c㎥/st. APSG attachment can be used to combine multiple discharge ports into a single outlet.

※E.g. A PSG102 will combine 2 ports enabling 0.6c㎥/st of grease to be delivered to a single point, while using a PSG104 to combine 4 ports will allow 1.2c㎥/st of grease to be delivered to a single lubrication point.

 

Equipment for single lumen

Showa Corporation
Motorized Greese Pump GPMW

Manufacturer

MODEL CODE

Discharge
Volume
(c㎥/min)

Maximum
Discharge
(Mpa)

Outlet
Port
Size

Pressure
Displacement
Method

Grease
Capacity
(c㎥)

Grease
Container
Type

Operating
Temp.
Range

Applicable
Grease
Grade

Showa

GPMW303

30@50Hz
36@60Hz
30@DC24V

8

2 – Rc1/4
(Select
1 Port)

Solenoid
Valve
(2 Way)

300

Grease Cup

0~40℃

NLGI
No.000~2

Showa

GPMW308

800

Showa

GPMW304

400

Cartridge

Showa

GPMW307

700

Showa

GPMW300

1000


 

Showa Corporation
Manual Greese Pump GPHW

Manufacturer

MODEL CODE

Discharge
Volume
(c㎥/stroke)

Maximum
Discharge
(Mpa)

Outlet
Port
Size

Pressure
Displacement
Method

Grease
Capacity
(c㎥ )

Grease
Container
Type

Applicable
Grease
Grade

Showa

GPHW013

1.0

10

2 – Rc1/4
(Select
1 Port)

Manually
(Lever)

300

Grease Cup

NLGI
No.000~2

Showa

GPHW018

800

Showa

GPHW014

400

Cartridge

Showa

GPHW017

700

Showa

GPHW010S

1000

 

 

Showa Corporation
Piston Distributor DG

 
Manufacturer

MODEL CODE

Discharge
Volume
(c㎥/st)

Activating
Pressure
(Mpa)

Return
Pressure
(Mpa)

Connection
Size
(GD Blocks)

Connection
Size
(Outlet Port)

Recommended
Piping Size

Size
Reference
(Diagram)

Applicable
Grease
Grade

Main

Branch

Showa

DG3

0.03

Min.
2.5
Max.Usage
10 (*a)

1.2

R1/8

M8 × 1.0

φ6+
Interior

φ4
Exterior

Diag. 1

NLGI
No.000~2

Showa

DG5

0.05

Showa

DG10

0.1

Showa

DG20

0.2

Showa

DG30

0.3

Diag. 2

Showa

DG50

0.5

Showa

DG100

1.0

Diag. 3

Showa

DG150

1.5

 

 

 
Showa Corporation
Junction Block GD

 

Manufacturer

MODEL CODE

Number of
Connections

A

B

Showa

GDA4K

4

33

-

Showa

GDA6K

6

49

38

Showa

GDA8K

8

65

54

Showa

GDA10K

10

81

70

Showa

GDA12K

12

97

86

Showa

GDA14K

14

113

102

 

Manufacturer

MODEL CODE

Number of
Connections

A

B

Showa

GDB4K

4

49

38

Showa

GDB5K

5

65

54

Showa

GDB6K

6

81

70

Showa

GDB7K

7

97

86

Showa

GDB8K

8

113

102

Showa

GDB9K

9

129

118

Showa

GDB10K

10

145

134

 

Showa Corporation
Piping parts

Hose & Reusable Connectors GHA02

Hose & Reusable Connectors GH02D GH02H GH02B

 

Accessories

Showa Corporation
Showa Monitoring Accessories UT30PS

The UT30PS pressure switches are specifically designed for the use in grease lubrication systems. Install the switch on the primary lubrication ch...

 

Showa Corporation
Monitoring Accessories DGE

  • The UT30PS pressure switches are specifically designed for the use in grease lubrication systems.

  • Install the switch on the primary lubrication channel to detect pressure fluctuations. (Not to be used on branch channels / pipes)

 

Lubrication grease

Showa Corporation
Special Lithium Complex Greese SLC1

  • SLC-1 is a lithium complex high performance grease, able to perform in various environments and harsh conditions
  • Available in 2 cartridge sizes of either 400c㎥ or 700c㎥ to suit Showa’s grease lubrication system chosen

CODESizeNLGIGrease TypeCharacteristicsSLC14400c㎥1Special
Lithium ComplexHigh heat, pressure, water, wear resistance.  Durable grease possessing high shear and structural stability.SLC17700c㎥1

 

 

Showa Corporation
Multi-Purpose Lithium Greese SLI

  • The SLI is a multi-purpose lithium grease for general use, able to perform in various environments and conditions
  • Contained in a 400c㎥ size grease cartridge, the SLI lithium grease are available in two NLGI grades of either No.0 or No.1
Manufacturer

CODE

Size

NLGI

Grease Type

Characteristics

Showa

SLI04

400c㎥

0

Lithium

Heat resistant, pressure resistant, water resistant and durable lithium grease for use in multiple applications

Showa

SLI14

400c㎥

1

 

Türkiyede Showa Corporation ile uygun rekabetçi fiyatları almak için müşteri temsilcimiz ile  http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış mühendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.

SHOWA CORPORATION markasına ait tüm ürünler

    0 kayıt bulundu

      ALFABETİK MARKA LİSTESİ

      Sertifikalarımız

      Oruçreis Mah. Tekstilkent Tic. Mrk.
      G2 Blok, No:101 (10AD-Z77)
      34235 Esenler / ISTANBUL
      T: +90 212 235 95 35 / 36
      F: +90 212 235 95 37

      info@imajteknik.com

      E-Bülten Listemize üye olun !

      Gelişmelerden haberdan olmak ve ileride gerçekleştirilecek yeniliklerimizden haberdan olabilmek için e-posta adresinizi bizimle paylaşın!