Sierra Instruments 

• Natural Gas Measurement & Control

  High accuracy, low pressure drop, 100:1 turndown, no moving parts, direct mass flow reading, robust mass flow control solutions...

• Mass Flow Measurement & Control

  We manufacture a variety of mass flow technologies for precision measurement of gases, liquids, and steam.

Sierra Medıum Flow Massflow Controller  dowland

• Digital Flowmeters & Controllers

  Featuring a wide variety of digital output communications protocols.

• Compressed Air Measurement & Control

  Compressed air isn't free, so more and more companies carefully monitor its usage. Thermal flow meters are ideal for this...

• Flare Gas Measurement

  Mass flow meters with high accuracy and gas composition flexibility for gases flared in the field

• Waste Water Treatment

  We are focussed giving our customer precision measurement or water flow and the many flows associated with waste water treatment and now have an answer for all common applications.

• Liquid Flow Measurement

  Solve accurate water and industrial liquid flow measurement requirements with multivariable mass vortex flow meters and clamp-on or insertion ultrasonic flow meters.

• Steam Flow Measurement

  As an innovative steam flow meter manufacturer, Sierras InnovaMass brand was the first multivariable mass vortex flow meter...

• Fuel Flow Measurement

  Sierra has a complete line of fuel instrumentation to cover both steady-state gravimetric and transient consumption measurement. ...

• Argon Mass Flow Meters

  Sierra thermal mass flow meters are specialized for accurate mass flow measurement and/or control of Argon gas across numerous industry applications.

• Carbon Dioxide Mass Flow Meters

  Sierra thermal mass flow meters are specialized for accurate mass flow measurement and/or control of CO2 gas across numerous industry applications.

• Nitrogen Mass Flow Meters

  Sierra specializes in accurate mass flow measurement and/or control of Nitorgen gas. One of the most commonly measured gases,...

• Gas Mixing & Blending

  Gas mixing and blending is one of the most common applications for mass flow controllers.

• Ultra Low Pressure Drop MFC

  Precision mass flow control with industry leading pressure drop of 4.5 psid (310 mBard) up to flows of 500 slpm (nlpm); Accuracy...

• High Pressure Flow

  Precision high pressure mass flow control is very difficult. Sierra has met this challenge with a patented high pressure mass...

• Low Flow Control (Down to 0.1 sccm)

  Low flow measurement and control is a difficult application. Ultra low flow mass flow controllers can accurately control flows...

• High Flow Control (Gas flow to 1000 slpm)

  Sierra is an expert in the control of high flows of gases. With our large and powerful control valves and PID valve control,...

• Large Pipes & Ducts, Hot Tapping, Purging

  We have optimized our gas mass flow meters to address precision measurement challenges in large ducts and pipes. 

 

Sierra C100m Medıum Flow Massflow Controller C100L-DD-2-OV1-SV1-PV2-V2-S0-O2C-100-C0-100-CRN-100-T8D( )

Sierra Instruments  products

241 VTP Innova Mass (Multivariable Vortex Meter)

241-V-LC-E4-DD-PS-V4H-ST-MP0-CG  SERİ : 102040-5923 K-FACTOR : 9,658 pulses/ft FLUİD : WATER RANGE : 72,490.40-2,165,151.28 kg/hr MAX. TEMP : 500 F MAX. PRESS. : 515 psig ELEKTRICAL : 100-240VAC / .25 AMP AMBIENT TEMP. : -40° F (-40° C) TO 140° F (60° C)

241-VTP-LC-E2-DD-PV1-V4H-ST-MP3-CM Vortex flow meter

241-VTP-LC-E4-NR-PS-V4H-HT-MP2-CM  Vortex flow meter Measuring point data (please complete): Medium: Measuring range: Nm³/h (operating) pressure: bar (operating) temperature: °C Density: g/l Viscosity: mPas Nominal pipe diameter: Exact pipe i.d.: mm If these data are not complete when ordering available , the order can not be executed ! SIERRA mass flow meter, vortex measuring principle model 241 "Innova-Mass®"

620S-L06-M1-EN2-V4-DD-0

620S-L06-M1-EN2-V4-DD-10-CC

640S-FM-L06-M1-M2(4")-E2-P2-V4-DD-0-PULSE Flow=1000 SCMH Gas=Air Pressure=65 milibar

780S-FM-D6-E2-P2-V4-PULSE-DD-8 Flow=100 SCMH Gas=CH4 Pressure=100 milibar

C100L-CMDD 13 ONI SKI PV2 V1 S1 C- GS Sierra Instruments 100 Series Mass Flow Controller Low Flow Controller 0-10 sccm up to 0-50 slpm Compod with RS-485 Modbus communication and display ¼-FNPT adapter bushing Neoprene Elastomers Kalrez Valve Seat 24 VDC Input power 0-5 VDC and 4-20mA Linear Output Signals 0-5 VDC linear standard for analog operation 15-pin mating connector with no cable Gas substitution

C100L-DD 13 ONI SKI PV2 V1 S1 C- GS Sierra Instruments 100 Series Mass Flow Controller Low Flow Controller 0-10 sccm up to 0-50 slpm Pilot Module Display ¼-FNPT adapter bushing Neoprene Elastomers Kalrez Valve Seat 24 VDC Input power 0-5 VDC and 4-20mA Linear Output Signals 0-5 VDC linear standard for analog operation 15-pin mating connector with no cable Gas substitution

CAL-TRAK ,MODELL 350 , STANDARD PRIMARY STANDARD Calibration System

CAL-TRAK ,MODELL SL-800-B , BASE UNIT Calibration unit for thermal gas mass flow meters and other volumetric flow meters for gases; Calibration accuracy 0.2% of reading;The base unit requires one or more calibration cells to form a functional unit; SERIES 100 SMART TRAK™

SIERRA MODELL 822 „TOP-TRAK“ TYPCODE 822 - 13-OV1-PV1-V1-MP  thermal Mass flow meter for gases

SL 800-24  Medium work area cell type for use with SL 800-B base unit; Flow range 50 Ncm3 /min -5 Nl/min; Accuracy volume: 0.15% f.s. reading ; Accuracy mass: 0.15% f.s. reading

SL 800-10 Cell type for the lower working range for use with the base unit

SL 800-B ;Flow range 5 Ncm3/min-500Ncm3/min;Accuracy volume:0.15% of measured value; Accuracy mass: 0.15% f.s. reading

SL 800-44 cell type for the upper work area for use with the base unit

SL 800-B; Flow range 500 Ncm3/min -50NI/min; Accuracy volume: 0.15% of measured value; Accuracy mass: 0.15% f.s.

822 TOP-TRAK Type Code: 822S-L-2-OK1-PV1-V4-T Mass Flow Meter for Gases

Application data : Gas: Turkish Gas Calibrated range: 0-10,5 SLPM Pressure in: 1 ATM Oper. temperature: 20°C °C Density: ?? Viscosity: 0,02 mPas Materials: Flow body and sensor con structed of 316 (1.4404) stainless steel. Calibration: All meters individually calibrated for the desired gas flow ranges: relative to Nitrogen flow. For other gases K-factors are used. Display: LCD display included Flow range: see flow body size Calibrated range: to be specified by the user! Accuracy: ± 1,5 % f.s. max. temperature: 50°C (122°F) max. pressure: horizontal mount 500 psig (34 barg). vertical mount 150 psig L Flow body low flow body with flow rangeability 0-10 sccm up to 0-15 slpm 2 Fittings: 1/4" compression for low and medium flow bodies (max. 50 slpm) OK1 Elastomers: Kalrez® (for low flow bodies) PV1 Input power: 12 - 15 VDC V4 Output signal: 4 - 20 mA, linear T Option: Totalizer integrated in display

810C-NR-8-V1-S1-LF  Gases Thermal Mass Flow Controller

Model 810C - Mass-Trak TM Standard configuration includes: Flow ranges: Calibrated for from 0 - 9 Ncm³/min to 0 - 46 Nl/min equivalent Nitrogen flow rate; Calibration: each instrument is individually calibrated refered top Nitrogen, For other gasses didcated K-Factors are applied Materials: flow body made of 10 % glassfilled Nylon 6/6 Sensor: made of 316 stainless steel (1.4404) Control valve: electromagnetic proportional valve, integrated Display: 3.5 digit LCD display Accuracy: ± 1,5 % f.s. Operating temperature: max. 50°C (Standard) Operating pressure: max. 10.3 barg (150 psig). Power supply: 24 VDC NR Display: none 8 Process fitting: 1/4“ VCR Fitting, for max. Flow rate 50 Nl/min, V1 Output signal: 0 - 5 VDC - linear S1 Preset input: 0 - 5 VDC - linear LF Calibration: for low flow rate (20 Ncm³/min full scale or less)

936-0066 Obsolete, replaced by 944-0024 solenoit 24V DC 100% ID 1,29A, 0604/10

Typ: C22B-02400E1-18.6NA NG6 directional control valve 24 VDC solenoid

780S-FM-FD7-E2-P2-V4-DD-11 Gases Thermal Mass Flow Meter

TAG Informations ( pls . complete ): Gas: Oxygen Flow range: 1000 Nm³/h Density: 1,25 g/Nl Viscosity: 0,02 mPas Operating pressure: 12 bar g Operating temperature: 20 °C If any of these data are missing in case of an order there will be problems in processing this order ! SIERRA Model 780S „Flat-Trak“ Typcode: 780S-FM-FD7-E2-P2-V4-DD-11 Flat-Trak™ In-line Mass Flow Meter with Flow Conditioner. All 316 stainless steel construction. 18-30 VDC or 100-240VAC input power with 3/4-inch diam. 316SS probe. Includes "Smart Electronics" with PC configuration software. Calibration temperatures up to 350°F (176°C) and pressure to 500 psig (34.5 barg). CE, FM, CSA, ATEX approvals. Linear 0-5 VDC or 4-20 mA output signals. Lifetime warranty on Fast Response (FR) sensor FM Ex-approval: with FM approval, requires E2 or E4 enclosure. FD7 Body size: Stainless steel 316 (1.4401), Size 3" (DN 80), with Flange Connection DIN, DN 80/PN16 E2 Enclosure: Hazardous-Area Location,(IP67), mounted directly onprobe. P2 Input power: 18 - 30 VDC V4 Output: 4 - 20 mA, linear Pulse Output: Totalizer pulse output (Onlyavailable with E2/E3/E4 enclosures WITH DD. Available onALL EN2 Enclosures) DD Display Digital display, 2 x 12 digit,backlit, LCD display indicatesflow rate and totalized mass inengineering units. Simplifiesconfiguration settings and provides system status informations11 Calibration: Calibrated for oxygen, max. cal. pressure 8,4 bar ü,max. calibration temp. 120°C.Correlated calibration with 4%accuracy. Consult datasheets for flowrate, pressure and tem perature limits

780S-O2C1 Oxygen service  For meters up to 4“ (DN100)cleaned for oxygen service, inspected with UV light, incl. certificate. (Consult factory for larger sizes)

Innova mass 240  Multivariable Mass Vortex Flowmeter

Modell 241, Typecode: 241-V-LS-E2-DD-PV1L-V4LH-ST-MP0-CF Akış ölçer Vortex Flow Meter TAG data ( M 3 - 3 - 2 ): Fluid: Water installed Pipe size: 54 inch Exact Pipe i.d.: 52,5 Inch Pressure: 0,1-1 bar g Temperature: 19-50 °C Density: 998,5 kg/m³ Viscosity: 1,03 mPas Flow range: 8100-9000 Acm³/h 1,28-1,42 m/sec Cal. Range: 0-12000 Acm³/h Insertion Vortex Mass Flow Meter - Modell 241 Typecode: 241-V-LS-E2-DD-PV1L-V4LH-ST-MP0-CF Industrial Insertion Vortex Flow Meter. For Mass flow Measurement of Liquids, Gases and Steam Please insure that at the point of installation an evenly distributed flow profile exists (long enough up and downstream piping). This requirement is essential to establish best possible metering results! 4-wire electronics standard. (2-wire optional). Hazardous Area version, FM or ATEX approved. The insertion vortex meter is available (optional) with a retraction tool and can be installed or deinstalled on pressurized pipe lines. Base version with following limitations: Operating temperature: -40 to +260°C (higher-optional) Operating pressure: up to 100 bar (depending on version) (Other temperatures and pressures available optional!) Equipped as follows: V Version: Velocity and / or volumetric flow sensor LS Probe: Standard length probe E2 Enclosure: NEMA 4 x (IP 65) enclosure, mounted directly on the probe. DD Display: Digital Display with push but tons PV1L Power supply: 18 - 36 VDC in connection with 2-wire operation V4LH Outputs: 1 Analog output (4-20 mA), HART Communication, two wire System, 1 Pulse output ST Temp. range: operating range -40°C to 260°C. MP0 Process pressure: Without pressure transducer (when application VT is required ) CF Process connect.: Compression Fitting on 2-inch 150 lb Flange.

Vortex Flow Meter 241-V-LS-E2-DD-PV1L-V4LH-ST-MP0-CF flow meter TAG data ( M 3 - 15 - 1 ): Fluid: Water installed Pipe size: 47 inch Exact Pipe i.d.: ?? Inch Pressure: 2,447-5,2 bar g Temperature: 19-50 °C

640S-ATEX-L06(M5)-E3(15’)-P2-V4-DD-13-HART-CC Gazlar  Thermal Mass Flow Meter

Sierra-Model 640S “Steel-Mass” TAG Informations (pls. complete): Gas: HYDROGEN(0.01WT% / 0.19WT%)+PROPYLENE (98.36%/98 .28%)+PROPANE (1.64% / 1.53%)., Flow range: 3,5 SCFM Operating pressure: 10- 18 bar g Operating temperature: 50 °C Density: ~1,8 kg/Nm³ Viscosity: 0,02 mPas Exact inner pipe diam: ?? mm Pipe direction: horizontal Orders with incomplete tag informations cannot be processed! Probe: Industrial insertion probe made of stainless steel 316L(1.4404), with flow direction marker Operating Pressure: 34 bar g (when used with compession fitting) Oper. Temperature: -40 to 177°C (High Temp. version, Option!) Ambient Temperature: Electronics -40 to 50°C (Re mote Transmitter, option!) Transmitter: SMART-Transmitter incl. max. /min. Alarms, Interface: SMART transmitter for 640S, incl. Cable and Software for configuration and Validation ATEXEx-approval: Mod. 640S with ATEX II 2 GD approval for EEx d IIC T2-T6, requires E2 or E3 enclosure. E3 enclosure must be specified when ordering display option (DD). (Attention! ATEX specified probes have limited flow ranges (50% only!)! E3 required also for probe lengths > 13" (330 mm). Max. probe length 36" (920 mm) RC2 must be specified. L(06)M5 Probe length: Special, with process flange 1"- ASA, 150 lbs,Pls. specify required probe length (6”) E3(15’) Enclosure: For remote Hazardous Area Locations, NEMA 4x (IP67) housing, mounted in a distance up to 200 ft (61 m) from flow body, specify cable length in brackets (15’), includes strain relief on probe end and mount ing bracket. P2 Input power: 18 - 30 VDC V4 Output: 4 - 20 mA, linear DD Display: Digital display, 2 x 12 digit, backlit, LCD display indicates flow rate and totalized mass in engineering units. For simplified configuration settings, provides system status information 13 Calibration: Calibrated for propane, max. cal. pressure 8,4 bar ü, max. calibration temp. 120°C. Correlated calibration with 4% accuracy. Consult datasheets for flowrate, pressure and temperature limits HART Option: HART universal variables; flow totalizer, K-factor, user full scale, and instantaneous flow (available E2-P2/E4-P2) config. only). FM approval available. CC Certificate: certificate of conformity

Model: 241-V-LS-E2-DD-PV1L-V4LH-ST-MP0-PF flow meter  Ser. No: 138706-9072

Model: 780S-ATEX-D6-E2-P2-V4-MODBUS-DD-SCR# 2002  flow meter

GAZ= LNG = 54% BUTANE+ 17 % PROPANE+ 29 % AIR = 181 STM3/H 2002 Serial no.: 106706 Range: 181 Sm3/hr Process gas: Mixture (specify) Reference conditions: 21.1°C/760 mmHg Process pressure: 1.6 Barg Process temperature: 35°C Body size: DN50 Output: 4-20 mA

240i - VTP-3-GD4-E2-DD-P2-V6-ST-MP3

VTP-3-LC-E2-DD-P2-V6-ST-MP4-CM-O2C-241-MA

VTP-3-LS-E2-DD-P2-V6-ST-MP4-CM-O2C-241-MA

620S-L06-M1-M2()-EN2-V4-DD-0

Side-Trak 830/840 AKIŞ ÖLÇER

840L-2-0V1-SV1-D-V1-S1

Top-Trak 822/824 Sierra FLOWMETRE  822-2-0V1-PV1-V1

fxt009  wireless modem

944 0024 (obsolete - successor is 16211600) selenoid bobin 24VDC 100% ID1 1.29A 0604/10

241s-VTP-LS-E2-PV1L-V4LH-ST-MP1-CM

640S-FM-L(13)M5**-E2-P2-V4-DD-0  Thermal Gas Mass Flow Meter

Thermal flow meter for gases Measuring point data (please complete): Medium: Measuring range: Nm³/h (operating) pressure: (operating) temperature: °C Density: kg/Nm³ Viscosity: mPas Exact pipe id.: mm Nominal pipe diameter: DN Pipe arrangement: (vertical, horizontal)?? Flow direction: (up/down) ?? Immersion measuring probe: In industrial design made of stainless steel 316 L (material 1.4404). With centering nipple for flow direction. Operating pressure: 34 bar g (when used with compression fitting) Operating temp. Gas: -40 to 177°C (high temperature version as an option!) Operating temp. electr.: -40 to 50°C (transmitter remote from the sensor available as an option!) remote electronics: SMART version incl. max./min. Alarms, interface: SMART version for Mod. 640S, incl. Connection cable and configuration/test software. FM Ex approval: FM Ex approval (USA), electronics housing code E2 or E4 required; max. probe length 2000 mm. L(13)M5 Probe length: Special version with 1"-ASA connection flange, 150 lbs, probe length 330 mm E2 Electronics housing: IP 67, EEx-d version, mounted directly on the sensor. P2 supply voltage.: 18 - 30 VDC V4 output signal: 4 - 20 mA, linear DD display: Digital 2-line, each 12-digit LCD display, for flow rate and total in physical units. 4 calibration: for biogas, max. Calibration pressure 2.1 bar g, max. calibration temperature 120°C. Biogas consists of 60% methane, 40% carbon dioxide (percentage by mass).

640S-NAA-L06-M1-EN2-P2-V4-DD-8

(DN50) 240i-VT-1-FD6-E4( )-DD-P2-V6-ST-MP0

DN65 InnovaMass® 240i Inline Series Next Generation Flow Meters alternative 241i-VT-1-LS-E4( )-DD-P2-V6-ST-MP0-CM

(DN80) 240i-VT-1-FD7-E4( )-DD-P2-V6-ST-MP0

(DN150)240i-VT-1-FD8-E4( )-DD-P2-V6-ST-MP0

(DN100) 240i-VT-1-FD8-E4( )-DD-P2-V6-ST-MP0

241i-VT-1-LS-E4( )-DD-P2-V6-ST-MP0-CM

C100-M-NR-10-OV1-SV1-PV2-V1-SO-CO-DP

C100M-15-OV1-SV1-PV2-V1-S0-C0-DP Orta akış kontrol cihazı

C100M Medium flow controller: 1.6 - 80 NLPM Argon 15 1/2 -FNPT. For high flow bodies up to 500 slpm. OV1 Viton® (Standard) SV1 Viton® PV2 24 VDC for all instruments (standard) V1 0-5 VDC and 0/4-20 mA linear output signals S0 Pilot Module/RS-232 (standard for Pilot Module/digital operation) C015 pin mating connector with no cable DP Profibus DP (NR only)

640S-NAA-L18-M8(4")-E4(50´)-P2-V4-DD-0-HART AKIŞ ÖLÇER IMMERSIBLE THERMAL

241s-V-LS-E4(50)-DD-PV1L-V4LH-ST-MPO-ST AKIŞ ÖLÇER MULTIVARIABLE MASS VORTEX

241S-V-LS-E2-DD-PV1L-V4LH-ST-MP0-PF Akış ölçer

241S Insertion Multiparameter Mass Vortex Flow Meter. FM, FMC, ATEX Approved (Ex-d). Two or four wire system V Volumetric flow meter for liquid, gas and steam. See 241i price tab for more economical options LS Standard probe Ex Proof Enclosure mounted on probe; includes FMC, IECEx and ATEX, CL 1 Division 1 DD Digital display with pushbuttons PV1L 12-36 VDC loop powered (only available with V4LH) V4LH One analog output (4-20 mA), one pulse, HART. Loop powered. ST Standard process temperature -40°F to 500°F (-40°C to 260°C) MP0 No pressure sensor. Used with VT option PF Packing gland* on 2-inch class 150 flange, 50 psig (3.4 barg) maximum process pressure without removable retractor. Packing gland itself rated to 600 psig (41,4 barg) process pressure. Packing gland live insertion/removal up to 600 psig (41.4 barg) must use a retractor (removable or welded on).

WP7603-G-1104248

S/N:106702 Model:780S-ATEX

241S-VTP-LS-E2-DD-PV1L-V4LH-ST-MP1-CM Sensör

SIERRA mass flow meter, vortex measuring principle Model 241 "Innova-Mass®" VTP Version: Velocity, volume and mass flow meter including temperature and pressure measurement for pressure and temperature compensation with automatic. Flow profile correction, according to the calculated Reynolds number. LS measuring probe: Standard E2 Housing: Electronics housing NEMA 4 x (IP 65) mounted directly on the measuring probe. DD Display: Integrated digital display with control panel PV1L Supply voltage: 18 - 36 VDC in connection with 2-wire operation V4LH Outputs: 1 analog output (4 - 20 mA) HART protocol, supply via 2-wire supply ST Temperature: average range. -40°C to 260°C. MP1 process pressure: Pressure sensor, measuring range 30 PSIA (2 bar a), overpressure safe up to 4 bar a. CM process connection: Compression fitting to 2" NPT adapter with external thread, pressure rating PN 100 (600 lbs)

WB3005-A2A-015  WATER BOILER

GCR

640i VT-1-L06-M0-E2-P2-V4-DD-0-10-12-99  measurer

With SCR-3408 640i VT Thermal Insertion Mass Flow Meter; all 316L stainless steel construction; linear 4-20 mA output signals for Mass Flow Velocity and Temperature, temperatures -40°F to 392°F (-40°C to 200°C); pressure to 500 psig (34.5 barg); standard accuracy (air) +/- 0.75% of reading above 50% of full scale flow and +/- 0.75% of reading plus 0.5% of full scale below 50% of full scale flow; includes qTherm™ Electronics with PC configuration software; 24 VDC +/- 10.0% or 100-240 VAC input power with a 3/4-inch (2 cm) diameter 316 SS insertion sensor probe; configurable alarm and pulse outputs; CE, cFMus, ATEX, IECEx approved 1 NAA. Non-Agency approved L06 6-inch (15 cm) M0 Customer to supply own mounting hardware E2 Hazardous-area location enclosure NEMA 4X (IP66) mounted directly on probe P2 24 VDC +/- 10.0% V4 Two linear 4-20mA outputs for mass flow velocity and temperature DD Digital Display: UltraBright LCD indicates Mass Flow Velocity, T, P, Alarms and Totalized Mass Flow in engineering units; 6-push button user interface makes selection easy: Dial-A-Gas, Dial-A-Pipe, change units, change language, set alarms and much more… 0 Air (+/- 0.75% of reading); Add three qTherm Dial-A-Gases, see Feature 11-13 below to choose additional gases (Default Gases: Nitrogen, Carbon Dioxide, Methane). You must choose qTherm calibration or actual gas calibration for each one of your three additional choices. 10 Nitrogen 12 Propane Natural gasmixture

M100L-DD-2-0V1-PV2-V1-C0-A1

TM 820 wrong code/ new code 822S-M-2-OK2-PV1-V4-CC-T-820-T6

822S-M-2-OK2-PV1-V4-CC-T-820-T6  Mass Flow Meters

Similar in design to our popular, economical nylon mass flow meters, the 822S and 824S are ideal if you are looking for cost-efficient air flow measurements but require stainless steel construction. Both stainless steel devices are exceptional at measuring air and most clean dry gases, including mixtures, toxics, corrosives and combustibles. The 822S is equipped with a tiltable LCD display that can be mounted on the device or on a remote panel. The 824S has a compact OEM configuration that comes without the display. Accuracy of +/- 1.5% of full scale (standard) Accuracy of +/- 1.0% of full scale (optional) Direct monitoring of mass flow rate Flow ranges from 0-10 sccm to 0-500 slpm Tiltable LCD display Use with ALL inert gases and mixtures “Primary Standard” calibration for best accuracy & NIST traceability Stainless Steel Body

822-13-OV1-PV2-V4

C101-DD-1-OV1-SV1-PV2-V1-S0-C3  Thermal Mass Flow Meter/Controller

Accuracy of +/- 1% of full scale Accuracy of +/- 0.5% of full scale 316 stainless steel construction Flow ranges from 0 to 10 sccm to 0-1000 slpm. (for flows less than 10 sccm reffer to MicroTrak Model 101) Fast-response control valve True digital performance with great flexibility “Primary Standard” calibration& NIST traceability Dial-A-Gas® Technology 10 pre-programmed gases come standard Substitute up to 9 gases of your own Unique pilot module allows these control functions: Control functions also available from PC via RS-232 Traditional analog control also included • 4-20 mA • 0-5 Vdc • 0-10 Vdc • 1-5 Vdc Source code for RS-232 communication provided Small footprint makes drop-in replacement easy Single-sided 24 Vdc power supply CE approval Multi-drop RS-485

640IVT-1-L48-M8(55")-E2-P3-V4-DD-0

C50L-SS-NR-3-PV2-V1 Thermal flow regulator for gases

Standard version with the following equipment: Sensor: 316 stainless steel (1.4404), Digital electronics: installed directly on the device Control valve: integrated electromagnetic proportional valve Output signals: 2 linearized analog signals 1x digital for connecting the Display and control unit setpoint specification: via an RS232 or Rs485 interface or optionally via 1 analog input, optional 0-5 Vdc or 4-20 mA, see encoding Connector: 9-pin sub-D SS case: stainless steel; only for C50L (Viton seals only) NR pilot module: without 3 Process connection: 3/8" compression ring fitting PV2 supply: 24 VDC (stand. for all devices) V1 input/output sign: 0-5 VDC, linear for output (and set point for controllers), (incl. interface RS232)

SE83106

620S-L09-M1-M2 FLOW METER   (9")-EN2-V4-DD-0

640S-FRQ5612 AKIŞ ÖLÇER  4-20mA,18-30VDC

640İ-VT-1-L09-M1-M2 FLOWMETRE

Pipe: DN250 Media: O2 (Oxygen Gas) Max Flo w:20.000Nm3 Supply:24V DC Max Process Pressure: 50 0PSI g Max Temperature: 30 C°

640S-FM-L06-M1-M2(4“)-E2-P3-V4-NR-0  Thermal flowmeter for gases

Immersion probe: Industrial design out 316 L stainless steel (material 1.4404). With centering nipple for the flow direction. operating pressure: 34 bar ü (when used with compression fitting) Operating temp. Gas ፦40 to 177°C (high-temperature version as option!) Operating temp. Electr. ፦40 to 50°C (transmitter disconnected from sensor available as opti- on!) deposed Electronics: SMART version incl. max. /min. alarms, interface: SMART version for mod. 640S, incl. connection cable and Configuration/testing software. FM Ex approval: FM Ex approval (USA), electronics enclosure code E2 or E4 required; max. probes length 2000 mm. L06 probe length: 150 mm M1M2 (4") Installation means: compression fitting for 3/4 “probe tube with 1" male NPT thread (clamping rings from VA), incl. threaded weld-on sleeve with 1" NPT female thread (NW the main pipeline () specify) E2 electronics box: IP 67, Eex-d version, direct on the sensor mounted. *P3 verse. -Voltage.: 85 - 265VAC 50/60 Hz * not for enclosure codes EN. V4 output signal: 4-20 mA, linear NR display: without 0 Calibration: with air, max. calibration pressure 8.4 bar above, max. calibration temperature 120°C. Please note the Manufacturer specifications for flow, pressure, temperature limits

241-VTP-LS-E4-DD-PV1L-V4LH-HT-MP3-CM  VORTEX TYPE STEAM FLOWMETER

DN:250, PN:40, PRESSURE:17BAR, TEMPERATURE:250°C, (max 50t/h will measure steam.)

241-VTP-LS-E3-DD-PV1L-VRLH-HT-MP3-CM  FLOW METER

241S-VTP-LS-E4( )-DD-PV1L-V4LH-HT-MP3-CM  FLOW METER

241S -VTP-LS-E2-DD-PV1L-V4LH-HT-MP3-CM  FLOW METER

Model 241 “Innova-Mass®” Immersion vortex flow meter into industrial design. For mass flow measurement of liquids, gases and steam. Please note that in order to achieve the most accurate measurement results create a pronounced flow profile on installation location is required! (as long as possible, straight, undisturbed entry and exit routes). Electronics in 4-wire design, (2-wire as option). Ex-protected version with FM or ATEX approval. The immersion flow meter can be adjusted using a Retractable fitting (option) under operating conditions can be installed on/off. Basic design with the following application limits: Operating temperature: -40 to 260°C (higher than option) Working pressure: up to 100 bar (depending on version) (Other temperatures and pressures available as an option! With the following equipment: VTP design: speed and volume and mass flow meters incl. temperature and pressure measurement for pressure and temperature compensation with automaton. flow profile correction, corresponds to the calculated Rey Noldszahl. LS measuring probe standard E2 housing: Electronic housing NEMA 4 x (IP 65) directly on the measuring de built up DD display: Integrated digital display with keypad PV1L vers.voltage: 18 - 36 VDC in conjunction with 2-wire operation V4LH outputs: 1 analog output (4 - 20 mA) HART protocol, 2-wire supply feeding 1 pulse output HT temperature: high temperature 120°C to 400°C. MP3 process pressure: pressure transducer, measuring range 300 PSIA (20 bar a) overpressure safe up to 41 bar a CM process connection: Compression fitting on 2" NPT adapter with external winch, pressure rating PN 100 (600 lbs)

640İ-VT-3-L09- M3-E2-P2-V4-DD-0-2-8-10 FLOWMETRE

241-VT-LC-E2-DD-PS-V4H-ST-MP0-CM ols code / 241S-VT-LC-E2-DD-PS-V4H-ST-MP0-CM new code

822S-M-2-OV1-PV1-V1

241S-VT-LC-E2-DD-PS-V4H-ST-MP0-CM

640S-ATEX-L24-M1-E3-2M-P2V4DD0

640S-FM-L09-M1-M2(8)-E2-P3-V4-NR-0 MASS FLOW METER

241-VT-LS-E2-DD-PV1-V4M-ST-MP0-CM

241S-V-LS-E2-DD-PV1L-V4LH-ST-MP0-CM

M100L LOWFLOW MASSFLOWMETER

PC Laptop connection cables and 24VDC power supply

C100L-DD-2-OV1-SV1-PV2-V2-S0-O2C-100-C0-100-CRN-100-T8D CONTROLLER

OL4/A650 - Red 5921 automotive calf changer final gasket

OL4/A650R-0000 - Aviation 650, Red LEDs, W/SWITCH Lat/Lon: Flash Code: Intensity

 

Sierra Instruments Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile  http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.