Quarity Control

Data Printers / Application Software

Quality Control Printer (LDM-100QC):
A unit to print out statistical calculating value necessary to quality control such as average, standard deviation, histogram, etc.

Counting Event Printer (AD-50):
This unit is to print out continuously distance message at the time when alarm signal is received.

Printer for LASER DIAMETER (RS-Printer):
RS-PRINTER takes through the RS-232C interface and prints the display value from Takikawa’s Laser Diameter

LASER DIAMETER MEASUREMENT SYSTEM ( LDM-PC EX )
It is application software to take the result measured with the LASER DIAMETER made of our company from the display part into PC by serial communications (RS-232C), and to file the graph print and the measurement result.

 

Type	Quality Control Printer
Model	LDM-100QC
Input	BCD data input (RS-232C or Analog deviation voltage is also available by option.)
Setting items	Center value, Upper value, Sampling method, Sampling period, No. of data, Histogram width, Date
	(Battery backuped)
Printer	Thermal type. 27-digit. 58mm wide
Print out contents	Each set item, T-graph(Real time), Histogram, No. of data, Max. value, Min. value, Range, Average, Standard deviation, Variance, Deviation, Process capability index, Bias for specification
Display	20 digits * 2 lines LCD with Back light
External input	Start/Stop, Hold(Trigger)
Power supply	AC100 - 240V Free power supply 50/60Hz, less than 10VA
Outside dimension	350(W) * 99(H) * 331(D)[mm]
Weight	3.5kg
Accessory cable	BCD cable 1pcs.
Ambient condition	Temperature: 0 - 45 degree centigrade, Humidity:35 - 85%RH(No condensation)

Alarm Unit

This unit makes alarm by both buzzer and light.

Alarm unit -- Specifications

 

Type	Alarm unit
Model	AL-03
Summary	This unit makes alarm by both buzzer and light by recieving alarm signal and memorizes number of alarms in panel counter
Input	Non-voltage contact signal(On-time:More than 0.1sec)
Output	Light and buzzer (Memorized to counter)
Reset input	Reset switch on front panel turns off Light and buzzer
Outside dimension	110(W) * 315(H) * 85(D)[mm]
Power supply	AC100V 50/60Hz 15VA

External Display Unit

Others

HIGH SPEED PRINTER

• This equipment is an insturument og gravure direct printing which marks company name, product name,size,etc on the cables of PE,PVC,LDPE,TEFLON or the pipes.
• It is for high speed and low speed.
• Servo motor drives the high speed printing roll.
• it is built-in with adjustment function of the direction to delay.
• Controlling the position and tore of servo motor enable to print in high speed and high quality
   

  HIGH SPEED PRINTER -- Specifications

  MODEL	PRT-SL	PRT-SH	PRT-DH
  TYPE	LOW SPEED PRINTING	HIGH SPEED GRAVURE PRINTING
  APPELICABLE	1 - 80mm	3mm below
  MAX.LINE SPEED	350m/m	1000m/m
  LINE CENTER	900 - 1100mm
  PRINT HEAD	1EA		2EA 1SET
  ROLL DRIVE	WIRE DRAW	AC SERVO MOTOR CONTROL SYSTEM
  ROLL SIZE	100 x 10mm
  INK PUMP	INK MIX ROLL MOTOR	AIR PUMP	GEAR PUMP
  INK	FIXED	Manual adjustment according to speed	Auto adjustment according to speed
  PNEUMATIC	3kgf/cm2 above
  SIZE (W)x(H)x(D)mm	400x1500x600	700x1250x630	1000x1250x630
  POWER SUPPLY	220V AC 50/60Hz

PREHEATER

INDUCTION PREHEATER

Preheater of SungMin Instruments has wide
application range. The conductor should be preheated when the cable wire extruding is processing. For AL strip annealing. Preheat wire before the process of the wire coating for wire-net. Preheater attached communication-wire capstan. * It's very effective to marker high quality and productivity through the process of preheating the iron or nonferrous-metal

INVERTER PREHEATER

• * Preheater of SungMin Instruments has wide application range.
  The conductor should be preheated when the cable wire extruding is processing.
  For AL strip annealing.
  Preheat wire before the process of the wire coating for wire-net.
  Preheater attached communication-wire capstan.
• * It's very effective to marker high quality and productivity through the process of preheating the iron or nonferrous-metal
   

  INDUCTION PREHEATER-- Specifications

   

  Model	Wire Size	TEMP. Set Range	kVA	Pulley
  IP-200P15	0.5 - 3mm	299Ž	15kVA 50/60Hz	200mm x 2
  IP-220P20	1 - 5mm	299Ž	20kVA 50/60Hz	220mm x 2
  IP-300P20	2 - 6mm	299Ž	20kVA 50/60Hz	300mm x 2
  IP-300P30	2 - 8mm	299Ž	30kVA 50/60Hz	300mm x 2
  IP-400P50	3 - 10mm	299Ž	50kVA 50/60Hz	400mm x 2
  IP-600P50	5 - 15mm	299Ž	50kVA 50/60Hz	600mm x 2
  IP-800P50	5 - 20mm	299Ž	50kVA 50/60Hz	800mm x 2
  IP-1000P100	7 - 25mm	299Ž	100kVA 50/60Hz	1000mm x 2
  IP-1200P100	10 - 30mm	299Ž	100kVA 50/60Hz	1000mm x 2

   

  INVERTER PREHEATER-- Specifications

   

  Model	HP-120P15	HP-220P7	HP-220P15	HP-300P15
  Pulley	120mm x 3.150mm x 1	220mm x 2	220mm x 2	200mm x 2
  Wire Size	Steel , Cu , AL , Solid ,Stranded
  	0.2 - 1.5mm	0.5 - 3mm		0.8 - 4.5mm
  Wire Temp. Setting Range	0 - 299Ž
  Wire Speed for 100Ž	2000m/min	600m/min	2000m/min	2000m/min
  Capacty	220V. 15kVA	220V. 7kVA	220V. 15kVA	220V. 15kVA
  Work Frequency	1000Hz
  Remote control	0 - 10V DC Input
  Work Volt	0 - 70V	0 - 40V	0 - 70V	0 - 40/70V
  Power Supply	220/380VAC 3Phase 50/60Hz

TALC MASTER

* TALC MASTER is a machine which can make can make an even application of the talc powder to the core wire for an easy separation from its covering material, when necessary.
* It has some special characteristics in that it can minimize the consumption of the talc powder;
It can control the quantity of the powder in proportion to the speed of the wire production.
Powder jet spray by a high pressure blower is possible.
* Quality application of the powder is guaranteed by using the electrostatic collector.
Three circulation filters are in use.

 

Model	TM-E40	TM-E70
Type	Electrostatic Powder Application
Wire Size	Max.40	Max.70
Fault Alarm	Blower, Screw, Electorostatic, Powder low
TALC Powder	DOSAGE Controller
Center Height	950 - 1150mm
Compressure Air Supply	4kgf/cm2
Scattering check equip	Ring blower
Heater	1.5kW Plate heater
Size (W) x (H) x (D)mm	750 x 1850 x 820	800 x 1850 x 1200
Static electricity voltage	0 - 50/90kVDC
Power Supply	220VAC 50/60Hz 1Phase 3kW

Butt Welding Machines

* By touch with each other process in the same
section, use to weld for a light alloy except copper and iron and to continuously work for invar or pressing up.
* A little change by heating and can quickly weld.
* Weld a suitable current electronic setting with using for SCR(Silicon Controlled Rectifier) running electronic control system according to material and thickness of welding materials.

 

Model	Copper sq.mm	Aluminium sq.mm	Steel sq.mm	Transformaer Rating	Weight GROSS	Size (W) x (H) x (D)mm	type
SM-5BW	0.5 - 5	---	0.5 - 7	3kVA	22kg	350 x 880 x 250	Handle type
SM-25BW	3 - 25	8 - 40	10 - 45	14kVA	24kg	704 x 1310 x 568	Handle type
SM-50BW	15 - 50	20 - 70	20 - 76	20kVA	250kg	704 x 1310 x 568	Handle type
SM-150BW	20 - 150	30 - 180	36 - 200	50kVA	780kg	1350 x 1420 x 1400	Pneumatic Auto type
SM-300BW	30 - 300	40 - 400	50 -430	Inverter 70kVA	840kg	1350 x 1420 x 1400	Handle & Auto type
SM-500BW	60 - 500	50 - 600	60 - 690	Inverter 150kVA	1050kg	1350 x 1420 x 1400	Handle & Auto type

*Input/Output Specifications

MODEL	Input Power	Output power
SM-5BW	220V AC 50/60Hz 1Phase	0 - 9V 50/60Hz
SM-25BW	220V AC 50/60Hz 1Phase	0 - 9V 50/60Hz
SM-50BW	220V AC 50/60Hz 1Phase	0 - 9V 50/60Hz
SM-150BW	220V AC 50/60Hz 1Phase	0 - 9V 50/60Hz
SM-300BW	220/380/440V AC 50/60Hz 3Phase	0 - 30V 50/60Hz
SM-500BW	220/380/440V AC 50/60Hz 3Phase	0 - 30V 50/60Hz

CORONA MASTER

• This equipment is composed of the device generating high frequency and electrode unit.
• In electrode, high friquency high voltage generates corona dischage in contact with jacketd copper wire. So the surface of jacket (PE, PVC, TEFRON, HDPE, LDPE) is activated and the adhesion is strengthened in the second progress, stamping.
• Compact Size.
• Easy to adjust the electrode.
• High efficiency and with performance by using IGBT.
• The interlocking device maintains the safety in opetation

 

Model	CM-200	CM-400	CM-GAS
Output Friquency	20 - 25kHz	20 - 25kHz	GAS Flame
Capacity	1kVA	3kVA	1000Ž
Output Voltage	5 - 12kV	3 - 10kV
Electrode	220mm	800mm	260mm BURNER
Size(W)x(H)x(D)	500 x 1425 x 620	600 x 1200 x 650
Power Supply	220V AC 50/60Hz 1Phase

 

 

Type	Counting Evint Printer
Model	AD-50
Counting value display	6-digit, 2-color(Green/Red), 7-segment LED. Zero suppress is available.
Input pulse for length measuring	Single/Double(A,B) phase pulse input is available, Up/Down counting is available
Pulse Edge	Rising or Falling
Pulse rate	Free setting between 0.00001m/pulse - 999999m/pulse
Max. Pulse frequency	2kPPS or 100PPS
Count sensor power supply	+12V 250mA
No of Events	10 (8 Events + RESET & PRINT)
Event input	From Rear panel terminal
RESET input	From Rear panel terminal & front panel push switch
PRINT input	From Rear panel terminal, front panel push switch & RS-232C
Message Change method	By RS-232C interface
PRESET1 setting	6 digit
PRESET2 setting	6 digit
Initial setting	6 digit
Lot No. setting	4 digit. Automatic increment by RESET is available.
Event distance compensation	Each event distance can be set.
PRESET outputs	Count value display into Red color 7-segment from Green, Front panel LED, RS-232C, Relay contact(1a-contact, AC250V Resistance load 2A)
Printer	Thermal type, 20 digit, 58mm wide
Out-of-paper signal	Front panel LED, RS-232C, Relay contact(1a-contact, AC250V Resistance load 2A)
Timing function	Year/Month/Date and Hour/Minute
Battery back-up	Back-up the counter value, timing, etc.
Communication	RS-232C interface (Baud rate:300 - 19200bps)
Power supply	AC100 - 240V Free power supply 50/60Hz, less than 8VA
Outside dimention	144(W) * 144(H) * 191(D)[mm]
Weight	2.8kg
Ambient condition	Temperature:0 - 45 degree centigrage, Humidity:35 - 85%RH(No condensation)

 

Type	Printer for LASER DIAMETER
model	RS-PRINTER
Printer	Thermal type, 20 digit, 58mm wide
Corresponding Model	Connected by TAKIKAWA's LASER DIAMETER LDM-110A110EXA210A210CA1000A1000EX
Communication rate	Difference depending on the model. An initial value is 9600bps.
Power supply	AC100 - 240V Free power supply 50/60Hz, less than 8VA
Outside dimention	180(W)×90(H)×210(D)[mm]
Ambient condition	Temperature:0 - 45 degree centigrage, Humidity:35 - 85%RH(No condensation)

 

Type	LASER DIAMETER MEASUREMENT SYSTEM
model	LDM-PC EX
PC/OS to be used.	Meet the forrowing requirement.
	IBM PC compatible (DOS/V machine): CD-ROM should be able to be used. Indispensable, and recommends CPU clock 300MHz or more USB port or a parallel port is installed in the main body, and operate.
	Microsoft@Windows98AMeA2000(sp4 or more)AXp
Corresponding Model	Connected by TAKIKAWA's LASER DIAMETER LDM-110A110EXA210A210CA1000A1000EXA100A100XY(100EX)
Communication rate	Difference depending on the model. An initial value is 9600bps.
DataBitLength	‚Wbits
StopBitLength	‚Pbit
ParityBit	None
Function	Measurement Value Display,Peak value displayAMeasurement value state display Data writeing , Graph Drawing and printing function

Elastoring/Spray Marker

• These instruments mark to Cable/Wire/Pipe by Elastic rubber or Ink from spray at the time when alarm signal is received.
• At present, Elastoring marker is in patent application at home and abroad.
   

  Elastoring/Spray Marker -- Specifications

  
   

  type	Splay marker	Elastoring Marker
  model	MAC-01	EMAC -005	EMAC -009	EMAC -019	EMAC -041	EMAC -057	EMAC -160	EMAC -245
  Marking material	Water paint (by spray)	Elastic rubber string
  Removement marking material from object	Difficult	Easy
  Material supply	ASAHI Water paint spray 300ml recommendable	Supply from Takikawa Engineering as bobbin
  Thruough hole dia.	Non	5mm	9mm	19mm	41mm	57mm	160mm	245mm
  Object dia.	Without restriction	0.5 - 3mm	1 - 6mm	3 - 10mm	10 - 35mm	20 - 40mm	50 - 120mm	100 - 200mm
  Line speed	Without restriction
  Marking delay	1 - 12•b (chanegable)	Max. 0.2sec(fixed)
  Marking time	1 - 5sec (chanegable)	(For a moment)
  Repeat period	Total of Marking delay and time	Less than 3.5 sec					Less than 6 sec
  Power supply	AC100V 50/60Hz	AC100 - 240V 50/60Hz
  Power consumption	30VA	50VA
  Air supply	Unnecessary	4kg/cm2
  Outside dimension	62(W) * 270(H) * 90(D)[mm]	360(W) * 190(H) * 590(D)[mm] (Except rubber supply), Weight:Approx.12kg		360(W) * 380(H) * 190(D)[mm] (Except rubber supply), Weight:Approx. 20kg			350(W) * 248(H) * 440(D)[mm] (Except rubber supply), Weight:Approx. 45kg	550(W) * 248(H) * 717(D)[mm] (Except rubber supply), Weight:Approx. 45kg

 

Outside Dia. Control System

• These units are to control diameter by outputting feed-back signals to extruding machine or winding machine in continuous extruding molding production line.
• Among the range, there are DAC-76A(Step delay control type), DAC-86B(PI control type) and DAC+88(Automatic starting-up type).
• There is LDM-210C that builds the control unit into the measuring instrument of the LASER DIAMETER. @
• Among the range, there is deformed material extruding control system for keeping shape of profile constant of extruding plastic or resin

 

Model	DAC-86B	DAC-76A	DAC+88	LDM-210C (Dia.Control Part)
Control method	P/I/SPEED Control	Step delay Control	Parameter Control	Selected P/I Control or Step delay Control
Automatic starting-up	NG	NG	OK	NG
Applicable Micrometers	All devices which have Analog deviation output		Only LDM-Series	Included LDM
Input kinds	Error input, Line speed input	Error input,	Extruder input, Capstan input	Line speed input
Input isolation	OK	OK	OK	OK
Input range [DCV]	Error: +/-10V Line speed: +10V	Error: +/-10V	Extruder: +10V Capstan: +10V	Line speed: +10V
Input impedance	200k ohm	200k ohm	200k ohm	200k ohm
Error gain setting	NG	10um/V-10mm/V (decade steps)	NG	NG
Output kinds	Control output	Control output	Extruder output, Capstan output	Control output
Output method	Deviation control	Deviation control	Absolute control	Deviation control
Output isolation	OK	OK	OK	OK
Output range	DC+/-10V	DC+/-10V	DC+/-10V	DC+10V (Ext./Cap. each)
Max. current	DC+/-20mA	DC+/-20mA	DC+10mA (Ext./Cap. each)	DC+/-20mA
Output impedance	less than 6 ohm	less than 6 ohm	less than 10 ohm (Ext./Cap. each)	less than 6 ohm
Output limit setting	OK	OK	OK	OK
Setting items	P,I	Alarm,P	System data(11items)[*1] Work data(12items)	P,I or P,Speed voltage,Distance
Programing function	NG	NG	OK (100 kinds)	NG
Operation button	MANU/AUTO /RESET	MANU/AUTO /RESET	MANU/AUTO/UP/DOWN	MANU/AUTO
External remote input	OK	OK	OK	OK
Pulse signal of length	Unnecessary	Necessary	Unnecessary	Unnecessary
Main display	Output display by LED bargraph	Output display by analog meter	Operation state display by LCD	Output display by LED bargraph
RS-232C	OK	NG	OK	OK
Tacho-generator input	NG	OK	NG	NG
Power supply	AC100-240V 50/60Hz Free power supply
Power consumption	less than 8VA	less than 15VA	less than 10VA	less than 20VA
Ambient condition	Temperature:0-45 degree centigrade, Humidity:30-85%(No condensation)
Outside dimension W * H * D[mm]	144 * 72 * 191	350 * 99 * 331	144 * 72 * 191	144 * 72 * 241
Weight	Approx. 1.5kg	Approx. 3kg	Approx. 1.7kg	Approx. 1.8kg

• [*1]Those data are backed up by battery, and not necessary to set for each product.

Defromed material extruding control system Specificaion

Summary	This system is for keeping shape of profile constant through direct compensation/control of extruding machine or drawing machine by measuring in Non-contact method a discrepancy from standard value of profile to be extruded with a detecting head to be set just behind extruding machine at the time when extruding plastic or resin.
Edge sensor	Sensing method	Non-contact/Infrared optical fiber sensing
PRF-10H PRF-40H	Measuring range	1mm * 20mm(PRF-10H), 4mm * 20mm(PRF-40H)
	Resolution	+/-1um
	Accuracy	+/-5um
	Operation temperature	Max. 300 degree centigrade
	Outside dimension	360(W) * 45(H) * 20(D)[mm]
	Weight	400g
Controller	Deviation indicator	Analog meter +/-0.5mm(PRF=10H), +/-2mm(PRF-40H)
PRF-93	Deviation output	DC voltage(Range: -4V to +4V) 4V/0.5mm(PRF-10H)A4V/2mm(PRF-40H)
	High/Low limit output	Muti-level setting available, Contact output 250V 1A
	Power supply	AC100`240V 50/60Hz 10VA
	Outside dimention	144(W) * 72(H) * 191(D)[mm]
	Weight	1.5kg
Control unit		DAC-86B(See Spec. of DAC-86B)
Sensor mounting metals		Option
PRF-93@@@@
PRF-10H@@@
PEF-40H@@@

TRAVERSE CONTROLLER

TRAVERSE CONTROLLER (TRC-10)
This is a device to control Traverse motion of Winding drum.
This device is to output Traverse speed voltage in proportion to its pulse
frequency number through receiving a rotation pulse of winding drum

 

Type	Traverse Controller
Model	TRC-10
Summary	This controller can control traverse motion when widing up cables to cable drum. Control output is proportional voltage to widing up speed.
Display	Position/Setting, State(RUN/WAIT), Direction
Data setting	Drum width, Pitch, Stop angle, Max. speed, Pulse rate, Output fine adjustment
Volume setting	Wide movement value, Frame movement value
Pulse input	A/B Phase(0.01 - 50kHz), Single phase pulse available, DC+12V[Max.40mA] Power supply avaelable
Extrenal input	Quick feed, Wide movement, Position reset, Frame movement, Emergency stop, Turn, Normal traverse, Reverse traverse start
Traverse output	Max.+/-10VDC(Resolution : 12 bits)
Fixed voltage output	+/-10VDC 2 channel, DC0 - +10V 2 channel (Adjustable by volume at rear panel)
Contact output	A direction, B direction AC250V/DC30V 10A DC30V (Resistance load)
Power supply	AC100 - 240V 50/60Hz 5VA
Ambient condition	Temperature:0 - 45degree centigrade, Humidity:35 - 85%RH(No condensation)
Outside dimension	144(W) * 72(H) * 191(D)[mm]
Weight	Approx. 1.5kg

PRESET CONTROL COUNTER

Preset Control Counter (PR-06)
PR-06 is 6-digit up/down counter for production line that is
available to set Preset-1(Forecasted value) as deviation from
full value, and Preset-1 value can be controled by line speed

Reverse Detector OM Series

Reverse Detector (OM-01)
This detector can output alarm by detecting reverse motion of winding direction in winding system and can be installed on DIN rail.

A/B Phase Divider (OM-02)
This device is to obtain 1/10 and 1/100 deviding output of single phase or A/B phase input pulse and can be installed on DIN rail.

2-Channels Distributor (OM-03)
This device has 2 channel input and 5 output for each pulse input and can be installed on DIN rail.

 

 

Type	Reverse Detector
Model	OM-01
Summary	This detector can output alarm by detecting reverse motion of winding direction in winding system and can be installed on DIN rail.
Power supply	DC+12V/0.5A(Changeable by option)
Reverse count Setting	3-digit digital switch
Contact output	1-a contact, 590ms one shot, AC240V 1A(Resistance load)
Pulse input	A/B phase pulse
Max. frequency	5kHz(Changeable by option)
Display	Power on LED and Reverse detecting LED
Inhibit input	Short-circuited terminal or 'L' level input to terminal (DC5V/CMOS level)
Outside dimension	100(W) * 70(H) * 112(D)[mm], Installing on DIN rail available

 

 

Type	A/B Phase Divider
Model	OM-02
Summary	This device is to obtain 1/10 and 1/100 deviding output of single phase or A/B phase input pulse and can be installed on DIN rail.
Power supply	DC+12V/0.5A(Changeable by option)
Dividing ratio	1/10 and 1/100
Output	Open collector output
Pulse input	A/B phase pulse
Max. frequency	10kHz(Changeable by option)
Single/2 phase changing	Changing by jumper on internal PCB
Outside dimension	100(W) * 70(H) * 112(D)[mm], Installing on DIN rail available

 

 

Type	2-Channels Distributor
Model	OM-03
Summary	This device has 2 channel input and 5 output for each pulse input and can be installed on DIN rail.
Power supply	DC+12V/0.5A(Changeable by option)
Input	2 channels(Pulled-up by 4.7kohm resistances)
Output	5-outputs/1-channel(Open collector output)
Max. frequency	10kHz(Changeable by option)
Outside dimension	100(W) * 70(H) * 112(D)[mm], Installing on DIN rail available

 

Changeable Constant Current Source

Changeable Constant Current Source (VI-101,102)
Special power source to control brake or clutch by input voltage in production line.

 

Type	Changeable Constant Current Source
Model	VI-101		VI-102
Summary	Special power source to control brake or clutch by input voltage in production line.
Input voltage	DC 0 - +10V
Output current	DC0 - 1A(Changeable range:0.1 - 1A), Ripple:Max. 0.5%		DC0 - 2A(Changeable range:0.2 - 2A), Ripple:Max. 0.5%
Max. output voltage	DC+25V		DC+28V
Withstand voltage (in-out)	+/-2000Vp
Circuit type	Serial CMOS Power transistors circuit
Power supply	AC200V(AC100V available by option) 50/60Hz 30VA		AC200V(AC100V available by option) 50/60Hz 60VA
Operation temperature	-5 - 50 degree centigrade
Outside dimension	130(W) * 85(H) * 102(D)[mm]				180(W) * 144(H) * 84(D)[mm]
Weight	1.0kg				1.5kg

 

Takikawa Engineering

Measuring instruments

Laser Micrometer

Scanning Units

• There are three different types of Laser Micrometers as standard type, such as Scanning Units for Single axis measuring , Orthogonal dual axes measuring and Swing type all circumference measuring.
• For measuring large diameter work pieces of more than 300mm, it can be measured by combination of 2 units of Single axis Scanning Unit.
• For applications to install emitters and receivers separately or widen their distance, Separate type can be used. Also Multi-axis measuring more than Double axes can be made by combination of Separate type Scanning Units.
• No influence to the measured value by ambient light such as the sunlight, etc.
• Measurement of high temperature objects with up to 2000 degrees centigrade is available by minor modification of the Scanning Unit.

 

Takikawa Engineering  Common specifications
Measuring system	Non-contact laser scanning system
Light source	Semiconductor laser diode(Max. output 1mW), Red(670nm), Continuous wave class 2
Structure of Unit protection	Dust protection(IP-64)
Ambient condition	Temperature:0-45degree centigrade, Humidity:35-85%RH(No condensation)

 

Takikawa Engineering  Individual specifications
Model	Measuring range (mm) [*1]	Measuring accuracy [*2]	Resolution	Weight
Single axis measuring Standard type
LDM-301H	0.02～1	+/- 1um	+/- 0.1um	1kg
LDM-302H	0.05～5	+/-1um	+/-0.1um	1kg
LDM-303H	0.3～30	+/-2um	+/-0.1um	1kg
LDM-304H	0.5～90	+/-5um	+/-1um	3.5kg
LDM-305H	1～180	+/-10um	+/-1um	15kg
LDM-306H	2～300[*2]	+/-30um	+/-1um	34kg
Single axis measuring Separate type
LDM-302H-SP	0.05～5	+/-1um	+/-0.1um	1kg
LDM-303H-SP	0.3～30	+/-2um	+/-0.1um	0.9kg
LDM-304H-SP	0.5～90	+/-5um	+/-1um	2.5kg
LDM-305H-SP	1～180	+/-10um	+/-1um	11kg
LDM-306H-SP	2～300*2	+/-30um	+/-1um	28kg
Orthogonal Dual axes measuring type
LDM-302H-XY	0.05～5	+/-1um	+/-0.1um	2kg
LDM-303H-XY	0.3～30	+/-2um	+/-0.1um	2kg
LDM-304H-XY	0.5～`90	+/-5um	+/-1um	14kg
LDM-305H-XY	1～180	+/-10um	+/-1um	50kg
LDM-306H-XY	2～300	+/-30um	+/-1um	70kg
Swing type all circumference measuring[*3]
LDM-303H-SP LDM-703A	0.3～30	+/-2um	+/-0.1um	9kg[*4]
LDM-304H LDM-704A	0.5～90	+/-5um	+/-1um	27kg[*4]
LDM-305H LDM-705	1～180	+/-10um	+/-1um	60kg[*4]

 

 

[*1]Measurement of large diameter more than several meters can be made by using 2 units of Scanning Unit [*2]Measuring accuracy is stated on the conditions of average time more than 400 times and measurement within special measuring area. [*3]LDM-703, LDM-704A and LDM-705 are Model No. only for Swing Mechanisms. [*4]These weights are only for Swing Mechanisms.

 

 High Speed Scanning Type

 

Takikawa Engineering  Common specifications
Measuring system	Non-contact laser scanning system(2000time/sec)
Light source	Semiconductor laser diode(Max. output 1mW), Red(670nm), Continuous wave class 2
Structure of Unit protection	Dust protection(IP-64)
Ambient condition	Temperature:0-45degree centigrade, Humidity:35-85%RH(No condensation)

 

 

Takikawa Engineering Individual specifications
Model	Measuring range (mm)	Measuring accuracy [*1]	Resolution	Weight
Single axis measuring Standard type
LDM-301HS	0.03～1	+/-1um	+/-0.1um	1kg
LDM-302HS	0.07～5	+/-1um	+/-0.1um	1kg
LDM-303HS	0.3～30	+/-2um	+/-0.1um	1kg
LDM-304HS	0.5～90	+/-5um	+/-1um	3.5kg
Single axis measuring Separate type
LDM-303HS-SP	0.3～30	+/-2um	+/-0.1um	0.9kg
LDM-304HS-SP	0.5～90	+/-5um	+/-1um	2.5kg

[*1]Measuring accuracy is stated on the conditions of average time more than 400 times and measurement within special measuring area.

 

Distance between transmitter and receiver ( Separate model ) LDM-302H-SP --- 20mm Max. LDM-303H-SP --- 400mm Max. LDM-304H-SP --- 1000mm Max. LDM-305H-SP --- 3500mm Max. LDM-306H-SP --- 4000mm Max. High temperature measuring object   - Optional remodel (Up to about 1200Ž Max. ) transparent measuring object---Standard function of display unit tranceparent film width---optional remodel

 

Cable Extention Adaptor (LDM-201,-202), to be used in case distance between a Scanning Unit and a Display Unit exceeds 30 meters. Dividing Adaptor (LDM-205,-206), which divides output signals from Scanning Unit.

Display Units

A lot of applications are available by various functions of Display Units.

• Real time measurment and Max./Min. value, Average value Display for a period.
• Average,Difference,Sum,Ratio,Flatness calculation of Multi-axis measurement
• Large diameter/Long width measuring
• Film thickness measuring
• IC-Pin Pitches measuring
• Total Control of Multi-production lines
• Cable cover(wall) thickness measuring
• Outside Diameter Control is available by Control Units
• Others

 

 

	LDM-110	LDM-110EX	LDM-1000	LDM-1000EX	LDM-210	LDM-210C
No. of Axes	For Single	Max. 2	Max. 5	Max. 3	For Single
Scanning cycle	400 times/sec	400 times/sec	400 times/sec	400 times/sec	2000 times/sec
No. of Averaging time	1-2048 (16 steps)	1-2048 (8 steps)	1-2048(22 steps) at LDM-1000LS 1-1024(19 steps) at LDM-1000XY		1-2048 (12 steps)
Measuring mode	16 kinds	8 kinds (X,Y axis each)	16 kinds + Optional edges measurement per each axis		Optional edges measurement per each axis
Processing function	NG	Average, Difference, Large dia. measurement, etc.			NG
Cable cover(Wall) thickness processing	NG	NG	OK(by LDM-1000XY)		NG
Display device	7 segment LED		Graphic LCD	7 segment LED	7 segment LED
No. of Display digit	4-5 digits	4-5 digits	3-6 digits	3-6 digits	4-5 digits
Processing contents monitor	NG	NG	OK	OK	NG
Center position monitor	LED(8pcs)	LED(8pcs) (X,Y axis each)	Graphic bargraph per each axis	LED(8pcs) per each axis	LED(8pcs)	LED(15pcs)
No. of channel of Recorder output	1	1	1 channel per board(LDM-1000LS/XY)		1
Recorder output performance	Max.+/-10V, Resolution 12bits(=approx.10mV/1bit), Output impedance 100ohm(approx.), Deviation/Absolute value switch over available
Recorder output gain	1μm-1m/V(decade steps)		0.1μm`1m/V(decade steps)		1μm-1m/V(decade steps)
Digital dia. controller connection	OK	OK	NG	NG	OK	NG (Built-in Dia.Controller)
Center value setting	5 digits	5 digits	6 digits	6 digits	5 digits
High/Lo limit tolerance setting	4 digits	4 digits	6 digits	5 digits	5 digits
High/Low limit contact output	1a contact(*2)		1a contact(*2) per board(LDM-1000LS/XY)		1a contact(*2)
	Contact rating: AC250V 2A(Resistance load)
Error contact output	1b contact(Close when power OFF)		1b contact(Close when power OFF)(Combined use by each board)		1b contact(Close when power OFF)
	Contact rating: AC250V 2A(Resistance load)
Laser remote terminal	OK	OK (X,Y common)	OK(each LDM-1000LS board)		OK
Hold terminal	OK	OK (X,Y,P common)	OK(each LDM-1000LS/XY board)		OK
Edge monitoring function	OK	OK	OK	OK	OK
Self-diagnosis mode	OK	OK	OK	OK	OK
Multi-point calibration function	OK	NG	NG	NG	OK
Trigger function (Max. meas., Deviation meas., etc.)	NG	NG	OK	OK	NG
Offset function	NG	NG	OK	OK	NG
Zero set function	OK	NG	OK	OK	OK
mm/inch changeover function	NG	NG	OK	OK	NG
Programing function	NG	NG	OK(30 kinds)	OK(9 kinds)	NG
Graph display	NG	NG	OK	NG	NG
Serial port	OK	OK	OK	OK	OK	OK
BCD output	Option		OK(by LDM-1000BCD)		Option
Cable length	Standard 5 meters, Max. 30 meters (Extensible to 120m.max. as option)
Power supply	AC100-240V Free power supply 50/60Hz
Power consumption	less than 11VA	less than 14VA	less than 15VA(only display unit) less than 8VA(each board)		less than 15VA	less than 20VA
Ambient condition	Temperature:0-45 degree centigrade, Humidity:35`85%RH(no condensation)
Outside dimension	144(W) * 72(H) * 191(D)[mm]		216(W) * 144(H) * 225(D)[mm]		144(W) * 72(H) * 191(D)[mm]	144(W) * 72(H) * 241(D)[mm]
Weight	Approx. 1.5kg	Approx. 1.6kg	Approx. 4kg (only display unit) Approx. 280g (each board)		Approx. 1.5kg	Approx. 1.8kg

 

Cable Extention Adaptor (LDM-201,-202), to be used in case distance between a Scanning Unit and a Display Unit exceeds 30 meters. Dividing Adaptor (LDM-205,-206), which divides output signals from Scanning Unit. LDM-210/LDM-210C uses the detection part of the exclusive use because the scan time is different from the conventional model.

Takikawa Engineering   Eccentricity Monitor

 

		EM-303A	EM-304A
Components		Measurement unit (EM-303A)	Measurement unit (EM-304A)
		HF Power supply (EM-200R-4)
		Display unit (EM-PC)
Condition of objects mesured	Objects	Electric cable/wire, whose core conductor shall be round and insulated.
	Finished diameter (mm)	0.3`15[*1]	0.8`30
	Core diameter (mm)	0.1`10[*2]	0.5`20
	Measuring accuracy[*3]	Diameter : +/-0.002mm[*4] Eccentricity : +/-0.010mm[*5]	Diameter : +/-0.005mm Eccentricity : +/-0.020mm[*5]
Ambient condition	Temperature	5 - 40 degree centigrade
	Temperature change (undertaking accuracy)	less than 10 degrees
	Humidity	35 - 85%RH (No condensation)
Output	Analog output	Diameter deviation(Ave.,X,Y), Eccentricity(X,Y) are -10V to +10VDC Diameter(Ave.), Eccentricity, Eccentric angle are 0V to +10V
	RS-232C Communication	Baud rate 1200/2400/4800/9600/19200/38400 bps
	Alarm output	Upper and Lower limit of Diameter, Eccentricity over (MOS relay output)
	Data save	Saving data into HDD is available
Power supply	Supply voltage	AC100V +/-10V
	Supply frequency	50/60Hz
	Power consumption	less than 120VA
	Earthing resistance	less than 100 ohm
Outside dimension [mm]	Measurement unit	386(W) * 386(H) * 314(D)	526(W) * 530(H) * 348(D)
	HF Power supply	121(W) * 117(H) * 280(D)
	Display unit	346(W) * 287(H) * 173(D)
Weight	Measurement unit	21‚‹‚‡	38‚‹‚‡
	HF Power supply	4.5‚‹‚‡
	Display unit	7‚‹‚‡

 

 

[*1]Available upto 20mm in a specific condition. [*2]Available upto 15mm in a specific condition. [*3]This condition shall be applied to X-axis and Y-axis respectively. [*4]This measuring accuracy is guaranteed when the condition that the diameter is less than 10mm and the cable/wire position shall be locating at the place within +/-10mm of its center are satisfied. [*5]This measuring accuracy is guaranteed when the condition that the diameter is less than 10mm and the cable/wire position shall be locating at the place within +/-3mm of its center are satisfied.

 

Cable Capacitance Monitor / Calibration Capacitor

• This monitor can continuously measure capacitance of a covered cable in on-line water bath, which is manufacutured by continuous extruding machine.
• Cable capacitance control is available by outputting control voltage.
• Cablibration for Cable Capacitance Monitor is available by Calibration Capacitor (Option).

 

Display unit
Model	CPM-401
Measuring range	0 - 400pF/m (Expansible by option)
Measuring accuracy	Either larger value of +/-0.2% of reading value or +/-0.2pF/m
Resolution	0.1pF/m
Sampling time	500 times/sec
Capacitance display	4-digit 7-segment LED (Green)
Deviation display	4-digit 7-segment LED (Red) LED Bargraph.(F.S.=selectable +/- 10 or 100pF/m)
Target value setting	4-digit digital switch
High/Low limit setting	3-digit digital switch
Average	Moving average(1 - 5000 times, 1/2/5 steps)
Zero adjustment	Push ZERO switch on front panel and adjust at automatic
Analog output	Output capacitor/deviation(selectable) within +/-10VDC, Selectable gain, Isoration type.
High/Low limit contact output	Display in Red LED, 1a-contact (AC250V resistance load 2A)
BCD output	Option
External communication	RS-232C interface
Control method	Proportional control
Control output	Max. +/-10VDC, Isoration type
Line speed	Max. 3000m/min
Power supply	AC100 - 240V Free power supply 50/60Hz 10VA
Ambient condition	Temperature:0 - 45 degree centigrade, Humidity:35 -85%RH(No condensation)
Outside dimension	144(W) * 72(H) * 191(D)[mm]
Weight	Approx. 1.7kg

 

Repeater unit
Model	CPM-101
Construction	Alminium diecast (Dust & Water proof)
Ambient temperature	0 - 45 degree centigrade
Outside dimension	80(W) * 125(H) * 57(D)[mm]
Weight	Approx. 1.7kg

 

Sensor unit
Model	CP-05	CP-09	CP-15	CP-26
Outside dimension	28 * 226mm	40 * 386mm	60 * 656mm	80 * 900mm
Weight	0.5kg	1kg	3kg	6kg
Water conductivity	1mS/cm or less (It depends on water temperature and dissolved materials. Recommendable to use water with conductivity of 0.5mS/cm or less)

• After purchase, tracability is available by option.
• Calibration Capacitor for CP-15/CP-26 can be prepared by option.
• Please feel free to contact us about calibration for other Capacitance Monitors.
• Please feel free to contact us about measuring method of Calibration Capacitor.@

Takikawa Engineering Running Metalwire Thermometer

 

name	Runnning MetalWire Thermometer
model	RMT-01
Features	A portable thermometer with compact size, light weight and dry batteries used for power. Applicable for even small diameter of less than 0.1mm by using k-type thermocouple with small heat capacity to measure temparature of small metal wires. As for the maximum measurement diameter, even Φ10mm is possible. Accurate measurement is available due to small heat capacity of the thermocouple and small rotation friction of the pulley. Free from thouble of short circuit to the thermocouple caused by copper dust or the like. Non-contact power supply and data passing to the pulley that makes the pulley's rotation friction so small and rotation so smooth. A high-performance thermometer by making full use of CPU and the latest electronic technology. Accurate calibration is available by using a calibrator for K-type thermocouple.
Detection Sensor	K-type(Alumel-chromel) thermocouple
Temparature Measuring range	10　～　250℃
Display	７ segment LCD　４digits
Display Time	1/Sec. (once a second)
Power	A dry battery (size AA) x 4 and AC Adaptor
Power Consumption	6V　0.4A（dry battery） 5V　0.5A（rechargeable battery） Durable for 4 hour constant use of dry batteries and a rechageable battery made by SANYO Electric Co.,Ltd.
Ambient Temperature,Humidity	0～45℃,35～85%RH(No condensation)
Outside Demension	Machine body : 70(W)×157.4(H)×34.5(D)[mm] Pulley : 100mm diameter.
Weight	Approx.0.7kgiincluding batteriesj

Takikawa Engineering  LENGTH MEASURING COUNTERS

• * LC-2500 satisfy the cable manufacturer's demand of
  pursuing accurate cable length.
• * This tester variously applied to wide speed range and conductor diameter, have belt driving unit and here not any slippage.
• * This tester is suitable device for demanding high performance and reliability at cable length measuring parts. 

  MODEL	LC-1000	LC-2000H	LC-2500H	LC-3000H	LC-3500R
  Line Center	1000±150mm	1000±250mm	1000±160mm	1000±120mm	Machine adhesion
  Roller	Hard Coating	Coating Belt	Timing Belt +Ceramic		Coating Belt
  Measure	Digital pulse input
  Max. Diameter	Φ5 - 150mm	Φ10 - 200mm	Φ5 - 100mm	Φ2 - 20mm	Φ10 - 80mm
  Max. Line Speed	100m/m	50m/m	100m/m	200m/m	40m/m
  Display	6digits LED display
  Contact Output	2reset contact 250V 5A resitive load
  Meter Pulse Out	1pulse /1m x 3EA
  ACCURACY	0.05%
  Resolution	0.02%(1pulse 50um)
  Power Supply	100 - 240VAC 50/60Hz

Detector

Surface Variation Detector
 

• TM-series Surface Variation Detectors were designed to monitor surface variations in an object by means of emitting light to the object and detecting a difference of interrupted light volume which is affected by the variation.
• Those TM-series detectors can be used in production lines of all products, such as optical fibers, enamel, vinyl wires, communication and power cables, metal and glass rods, plastic tubes, pipes, hose, etc., which are required to detect surface variations.
• Non-contact type detection & reliable, continuous high speed detection.
• Easy operation and simple maintenance.

 

For Fine wire/cable
Model	TM-503W	TM-1100XY	TM-1003W	TM-1104W
Detecting derection	3	2	3	4
Measuring method	Double-slit, infrared LED projection type
Measuring range	0.02 - 3mm	0.02 - 5mm
Detecting sensitivity	0.01 - 1mm
Detecting accuracy	+/-1% of max. set value
Slit length	6mm	18mm	12mm	18mm
Slit width	0.1mm	0.5mm
Line speed[*1]	5m/min - 2000m/min	1m/min - 1500m/min
Recorder output	+/-0.2V/0.1mm	+/-1V/0.1mm	+/-0.5V/0.1mm	+/-1V/0.1mm
Alarm output	Red LED turns on, Relay contact output(AC250V 2A Resistance load)
Alarm time[*2]	0.1 sec	0.5 sec	0.1 sec	0.5 sec
Ambient temperature	-5 - 50 degree centigrade(No condensation)
Power supply[*3]	DC+/-15V	AC100V 50/60Hz	DC+/-15V	AC100V 50/60Hz
Power consumption	5VA	10VA	5VA	10VA
Outside demension (W * H * D[mm])	150 * 140 * 40	260 * 265 * 60	150 * 140 * 40	350 * 280 * 55
Weight	0.8kg	2.5kg	1kg	5kg

 

 

	for Middle dia. wire/cable
Model	TM-3001W	TM-3002W	TM-3004W	TM-3008W	TM-3016W
Detecting derection	1	2	4	8	16
Detecting method	Double-slit, infrared LED projection type
Measuring range	0.1 - 35mm
Detecting sensitivity	0.05 - 10mm
Detecting accuracy	+/-1% of max. set value
Slit length	48mm
Slit width	1mm
Line speed[*1]	1m/min - 1500m/min
Recorder output	+/-0.1V/0.1mm(on each axis)
Alarm output	Red LED turns on, Relay contact output(AC250V 2A Resistance load)
Alarm time[*2]	0.5 sec
Ambient temperature	-5 - 50 degree centigrade(No condensation)
Power supply[*3]	AC100V 50/60Hz
Power consumption	5VA	10VA	10VA	20VA	40VA
Outside demension (W * H * D)	260 * 90 * 41mm	260 * 260 * 60mm	370 * 335 * 60mm	370 * 335 * 120mm	370 * 335 * 240mm
Weight	1.5kg	3kg	6kg	12kg	24kg

 

 

	for Large dia. wire/cable/pipe
Model	TM-4001	TM-4002	TM-4004	TM-4008	TM-4016
Detecting derection	1	2	4	8	16
Detecting method	Single-slit, white tungsten lamp projection type
Measuring range	0.1 - 60mm
Detecting sensitivity	0.15 - 10mm
Detecting accuracy	+/-2% of max. set value
Slit length	70mm
Slit width	1.5mm
Line speed[*1]	1m/min - 1000m/min
Recorder output	+/-0.1V/0.1mm(on each axis)
Alarm output	Yellow or Red LED turns on
	Relay contact output (AC250V 2A Resistance load)
Alarm time[*2]	0.5 sec
Ambient temperature	-5 - 50 degree centigrade(No condensation)
Power supply[*3]	AC100V 50/60Hz
Power consumption	10VA	20VA	30VA	60VA	120VA
Outside demension (W * H * D)	540 * 160 * 100mm	630 * 560 * 160mm	807 * 674 * 136mm	807 * 674 * 272mm	807 * 680 * 424mm
Weight	7kg	25kg	38kg	76kg	152kg

 

 

	For Extra. large dia. wire/cable/pipe
Model	TM-6004	TM-6008	TM-7003	TM-7009		TM-7012
Detecting derection	4	8	3	9		12
Detecting method	Single-slit, white tungsten lamp projection type
Measuring range	1 - 80mm		1 - 130mm
Detecting sensitivity	0.2 - 10mm
Detecting accuracy	+/-2% of max. set value
Slit length	90mm		140mm
Slit width	2mm
Line speed[*1]	0.3m/min - 500m/min
Recorder output	+/-0.1V/0.1mm(on each axis)
Alarm output	Yellow or Red LED turns on
	Relay contact output (AC250V 2A Resistance load)
Alarm time[*2]	0.5 sec
Ambient temperature	-5 - 50 degree centigrade(No condensation)
Power supply[*3]	AC100V 50/60Hz
Power consumption	30VA	60VA	30VA	90VA		120VA
Outside demension (W * H * D)	720 * 660 * 153mm	720 * 660 * 306mm	990 * 930 * 125mm	990 * 930 * 375mm		990 * 930 * 500mm
Weight	38kg	76kg	40kg	120kg		160kg

[*1]Applicable Line speed range varies by variation height. [*2]HOLD output is available. (Option) [*3]AC200V Power supply type is available. (Option) In addition, other models for more detecting directions such as TM-6020(20 axes), and TM-7012(12 axes) and for parallel multiple line such as TM-1000S-8ch are also available

Surface Variation Detector

TMS-1104W/TMS-01

 

DETECTOR			Display unit
Model		TMS-1104W	Model	TMS-01
dxf format CAD file		Go	dxf format CAD file	Go
Detecting derection		4 axis	Sampling Friquency	75KHz（4axis）
Detection Method		Double-slit, infrared LED projection type	Main Display	７segmentLED　5digit
Detectable Outside Diameter		φ0.02～5mm	Sub Display	７segmentLED　2digit
Detecting Sensitivity		0.02～0.999mm	Recorder Output	0.1mm/V
Detecting Accuracy		+/-10μm. set value	Length Measurement input	encorder input
Slit length		18mm	Length Measurement power output	DC12V　Max50mA
Slit width		0.5mm	Alarm Output	Relay contact output(AC250V 2A Resistance load)
Feeding speed[*1]		1m/min～1000m/min	Outside Contact input	Reset input
Response		3Hz～10KHz	RS-232C interface	OK
			Cable length ( Between Sensor/Display )	5m
			Alarm Time	0.01～0.999Sec
Ambient Temperature		-5 - 50 degree centigrade (No condensation)	Power Source	AC90～240V 50/60Hz
			Power Consumption	17VA
Outside Dimension (W×H×D[mm])		350×280×55	Outside Dimension (W×H×D[mm])	144×144×210
Weight		3.5kg	Weight	3kg