MC664-X

P862 (Quad Core)

Type : EtherCAT, RTEX

The new MC664-X... Quad core A9 processor, Dedicated communications core, up to 128 axes and built-in EtherCAT port all adds up to the most versitile Motion Coordinator yet!

The MC664 and MC664-X feature a total of 128 axes in software with up to 64 motor axes and 64 bit integer position registers. 64 bit floating point calculations are used for ultra precise axis resolution.

P861 (Single Core)MC664

Type : EtherCAT, RTEX

The new MC664... Single core A9 processor. The P861 MC664 Single Core Motion Coordinator is a "drop-in" replacement for its predecessor the MC464.

PC-MCAT

P760 (2 - 64 Axes)

Type : EtherCAT, PC

Trio’s PC-MCAT 64 is an innovative “Motion + PC Solution”. A powerful quad core Intel Atom processor is used to drive both a high performance motion controller and a compact PC that can run user applications under Windows...

P900 - P904 (2 - 32 Axis)MC4N-ECAT

Type : EtherCAT

The MC4N is dedicated to running remote servo and stepper drives via the EtherCAT real time automation bus. The MC4N supports up to 32 axes of motion with 64 bit integer position registers for ultra precise axis resolution...

P906 - P910 (2- 32 Axis)MC4N-RTEX

Type : RTEX

The MC4N-RTEX extends the MC4N range of Motion Coordinators for networked drives. It is dedicated to running remote servo drives via Panasonic's RTEX Real Time EXpress automation bus. It is available with configurations from 2 to 32 axes...

MC508

P848 - P849

Type : Conventional

The MC405 is available in 2 different axis configurations. Both models feature a total of 16 axes in software. Any axes not assigned to built-in hardware can be used as a virtual axis. Every axis can be programmed to move using linear, circular, helical or spherical interpolation, electronic cams, linked axes and gearboxes...

P826 - P827MC405

Type : Conventional

The MC405 is available in 2 different axis configurations. Both models feature a total of 16 axes in software. Any axes not assigned to built-in hardware can be used as a virtual axis...

P821 - P822 MC403-ZMC403

P823 - P825 MC403

Type : Conventional

The MC403 is a high specification Motion Coordinatorusing a high performance ARM11 processor, with three flexible axis ports and two Voltage outputs.

The MC403 is available in 2 model formats offering 5 different axis configurations...

Euro 404 / 408

P831 - P832 Euro404
P833 - P834 Euro408

Type : Conventional

The Euro404 and Euro408 are high specification Motion Coordinators using a high performance ARM11 processor, with up to eight flexible axis ports and eight voltage outputs...

Modular

The The Motion Coordinator system is extremely modular, allowing the user to tailor the controller to their specific needs, this also allows the flexibility to incorporate new modules if the need should change, making the system "future proof"

Expandable

All The Motion Coordinators, whether PCI, panel mount, rack mount, DIN rail mount or a custom design format, incorporate a CANbus interface to allow for digital or analogue I/O expansion with Trio’s I/O modules. Special I/O requirements can also be accommodated using the CANopen protocol to control third party I/O modules. In many applications, Trio’s range can be combined to build a control system capable of driving a multi axis machine and all its auxiliary equipment.

HMI

Trio’s range of operator interface units provide a robust and functional HMI using the Trio fibre-optic network system. Third party HMI products, touchscreens etc., can communicate to the Motion Coordinator via the Modbus RTU serial protocol.