Türk Hillinger

Türk + Hillinger manufactures electrical directors, power resistors and thermosensors.

Türk Hillinger General brochure Pdf

 

Türk Hillinger

Braking/Retardation Resistors Type ALW

Description

Compacted resistor with flat rectangular section. Applications include the smoothing of power peaks for electronic speed controllers.

 

Technical data

Tensions  

up to 800 V

Sheat temperature  

max 250° C

Temperature controller  

130° C

Section  

40 x 20 mm or 80 x 20 mm

Length  

160 mm, 240 mm, and 300 mm

Range  

from 1 - 500 Ohms

Dielectric strength  

4000 V

Connections  

PTFE-insulated copper leads

 Application

Frequency transformer, manufacturing industry, electrical industry, apparatus construction, inverters, speed controllers

ALW – Power resistors Pdf

 

Türk Hillinger

Immersion Heater Type EHK

Description

Electrical heating element consisting of 3 u-shaped tubular heaters, which are brazed or welded onto a threaded nipple G 11/2 and can be supplied with a thermostat or / and a temperature limiter.

 

Technical data

Surface loading  

Depending on the medium to be heated up to 25 W/cm²

Temperature resistance  

up to max. 850°C

Max. immersion depth  

2200 mm

The immersion heaters are equipped for the use with 3-phase  

 

connection 400 V or with parallel connection 230 V  

 

Application

Heating of liquid and gaseous media e. g. provision of hot water, boilers, oil heaters, air heaters.

EHK – Immersion heater Pdf

 

Türk+Hillinger

Flat heating element Type FLC

Description

Flat heating element with CrNi-steel sheath and integrated tubular heater type RHK.

 

Technical data

Voltage  

up to 400 V

Surface loading  

abt. 5 W/cm²

Dielectric strength  

abt. 750° C max.

Temperature resistance  

about 5000 mm

Section  

33 x 7 mm

Length  

200 - 600 mm

Connections  

threaded tab M4

Application

Heating of surfaces, e.g. heating boilers, heating frames, heating of plates, stamping dies and moulds, antifreeze for liquid tanks.

RHK, RKF, FLC – Tubular heater Pdf

 

Türk+Hillinger

High performance cartridge heater Type HLP

Description

Metal-sheathed cartridge heater with ground sheath. The special construction allows an extremely high surface loading, i.e. maximum power in the smallest possible space.

 

Technical data


lastics industry, apparatus construction, woodworking industry, paper machine industry, medical technology, foundries, high vacuum technology, laboratory work, packaging industry.Application

HLP – High performance cartridge heater Pdf

 

Türk+Hillinger

Tubular Heater Type RHK

Description

Metal-sheathed compacted tubular heater, available in straight or bent execution. Threaded stud connections i. e. at both ends.

 

Technical data

Max. voltage  

480 V

Sheath material  

Cu and CrNi-steel

Diameter  

16 mm / 8,5 mm / 6,5 mm / 5 mm

Max. length  

Ø 16 mm = about 3000 mm

  

Ø 8,5 mm = about 4000 mm

  

Ø 6,5 mm = about 3800 mm

  

Ø 5 mm = about 3000 mm

  

Ø 4 mm = about 1500 mm

  

Ø 3 mm = about 1500 mm

 

Application

Plastics industry, apparatus construction, woodworking machinery, shoe machine industry, domestic appliances, foundries, high vacuum applications, laboratory work, packaging industry.

RHK, RKF, FLC – Tubular heater Pdf

 

Türk+Hillinger

Flat Tubular Heater Type RKF

Description

Compacted and metalsheathed heater with flat oval crossection; one-, two- or three- connection pins on one or both sides. Sheath material: CrNi-steel.
Heat conductor: Chrome nickel wire NiCr 8020 or other NiCr alloys. Insulation material: Pure magnesium oxide

 

Technical data

Max. voltage  

400 V

Max. temperature load of sheath  

:700°C

Cross-section  

13 x 5,5 mm / 17 x 6 mm / 22 x 6 mm

Max. length  

about 5000 mm

 

Application

Air and gas heaters, fluid heaters, oil heaters, dryers, heating element for railway points.

RHK, RKF, FLC – Tubular heater Pdf

 

 

Türk+Hillinger

Railway point heaters Type RKW

Description

Complete, ready to use heating units for rail points, consisting of flat heater type RKF-24 and watertight connection box. All accessories for fixing to standard S 49, S 54 and UIC 60 rails.

 

Technical data

Operating voltages  

up to 800 V

Application

For heating points on railways and tramways.

RKW–Railway point heater Pdf

 

Türk+Hillinger
High Performance Tubular Heater Type RP

Description

High performance tubular cartridge heaters offer a high watt density at a low mass. They are used, where space is at a premium. RP/RPT type heaters are available with and without thermocouple.

 

Technical data

Possible voltages  

24 V up to 250 V

Power  

max. 80 W / 100 mm length

Temperature resistance  

up to max. 750°C

Possible cross-sections (in mm)  

Ø 4 / Ø 3 / Ø 1,8 / Ø 1,3

  

5,5 x 3,9 / 3,2 x 3,2 / 2,5 x 4 / 2,2 x 4,3 / 1,8 x 3,2 / 1,4 x 2,3

 

Application

In the plastics industry for the heating of nozzles and hotrunner systems. Generally applied where space is restricted

RP, RPT – High performance tubular heater Pdf

 

Türk+Hillinger

Temperature sensors Type TE

Description

The sheathed thermocouple type TE consists of a thermocouple which is integrated in a stainless steel shealth and embedded in highly compacted magnesium oxide for an optimum electrical insulation. Easy to bend.

 

Technical data

Shealth material  

CrNi-steel AISI 321

Insulation  

highly compacted magnesium oxide

Max. temperature  

Fe-CuNi 600°C, NiCr-Ni 750°C

Dielectric strength  

500V

Insulation resistance  

> 50 MOhms

Diameter  

1,0 and 1,5mm

 

Application

Temperature measuring in heaters, especially injection nozzles for the plastics industry.

TE–Temperature sensors

 

Türk+Hillinger

PTC-heating elements Type HLPR

Description

Heating elements in cartridge shape or in special executions equipped with self-regulating resistance elements.

 

Technical data

Diameter  

9mm, 10mm, 11mm, 12mm, 16mm

Length  

50 mm to 1400 mm (Ø 12 mm)

Power  

max. 400 W

 

Application

Heating of liquids, preheating of oil and petrol, frost protection

 

Türk+Hillinger

spiral heater Type HR

Description

Heater with exosed heating filament located onto ceramic former or mica strip with a sheet metal housing. For use only with upstream or downstream fan blowers.

 

Technical data

Operating voltages  

up to 440 V

Max. loading  

approx. 9 W/cm²

Max. temperature  

approx. 600°C

Standard version  

up to 3000 W

Outer dimensions  

360x50x90 mm, 160x54x100 mm, 235x50x85 mm

 

Application

For tumbler dryers and industrial hot-air blower

 

Türk+Hillinger

electrical air heater Type HRR

Description

Channel heater with a housing of zinc-plated sheet metal with flanges on both side and mounted finned heaters type RHR.

 

Technical data

Wattages  

from 2 to 108 kW

Dimensions  

from 250x250x108mm to 800x800x250 mm

 

Application

Air conditioning and climatisation, industrial dryer

RHR, HRR–Finned tubular heating element Pdf

 

Türk+Hillinger

Lightly compacted cartridge heater Type PMV

Description

Metal-sheathed catridge heater with outer sheath of CrNi-steel. Compared with conventional catridge heaters of the same dimension and power, these have greater mechanical strength and a longer life. Suitable for heating solid and fluid media.

 

Technical data

Diameters  

10; 12,5; 16; 20 mm

Surface loading  

abt. 6,5 W/cm²

Permissible temperature rise  

750° C

Tolerance on diameter  

+/-0,2 mm

Connections  

pure nickel wire 30mm or insulated leads

Voltage  

230V

 

Application

Plastics industry, engineering industry, wood working machinery, shoe-making machinery, domestic appliances, high-vaccum techniques, foundries, laboratory work, packaging industr

 

Türk+Hillinger

Compacted heating element Type PMVA

Description

Heating element with CrNi-steel sheath. Insulated by compacted MgO. Insulated connection leads at one end and steamproof seals.

 

Technical data

Operating voltages  

10 to 250 V

Surface loading  

approx. 10 W/cm²

Max. temperature  

approx. 600°C

Diameter  

9,6 ± 0,1 mm

Min. length  

165 mm of which 80 mm is heated.

Power  

65 to 250 W

Connections  

copper leads with double insulation if requested

 

Application

Absorption type refrigerators, oil preheater

 

 

Türk+Hillinger

heating unit without metal casing Type PK

Description

Ceramic unit without metal casing. The heating wire is located in several axially-parallel holes and is prevented from coming out by locked ends. The connections are on a plug-in head.

 

Technical data

Voltages  

bis 440 V

Surface loading  

22 W / cm²

Max. temperature (sheath)  

650°

Diameter  

26; 32 and 45,9 mm

Connections  

Plug twins or twisted ends

 

Application

For heating gaseous media, e.g. for welding plastic.

 

 

Türk+Hillinger

Finned tubular heating element Type RHR

Description

Finnend tubular heating elements are based on a RHK type heaters. The surface area is enlarged by a strip in order to heat gases. At a high power the surface temperature is small and the heating element is short.

 

Technical data

max. temperature at tube sheath  

700° (at CrNi-steel)

diameters (with RHK 8,5mm)  

20 and 28 mm

Distance between fins  

5 mm

 

Application

Channel air heaters for air-conditioning and drying apparatus

 

Finned tubular heating element Type RHR Pdf

 

Türk+Hillinger

Nozzle heater Type HP

Description

The heater consists of a low
mass tubular cartridge heater type RP or RPT
coiled into a cylinrical sleeve with precise ID.
It is available with or without thermocouple.

 

Technical data

Voltages  

up to 230 V

Current max.  

4 A

Watt density  

max. 15 W/cm²

Dielectric strength  

1000 V

Max. temperature on inner tube  

450°C with a brass-inner sleeve

  

700°C with a CrNi-steel-inner sleeve

Application

Heating
of nozzles for the plastics industry, heating of liquids within tubes, heating of metals with circular cross section

 

 

Türkiyede Türk Hillinger ürünleri ile ilgili  uygun rekabetçi fiyatları almak için müşteri temsilcimizle (  http://www.imajteknik.com.tr/bize-ulasin ) veya Fiyat teklifi formunu ( http://www.imajteknik.com.tr/online-iletisim-formu ) doldurarak mesaj bırakmanız halinde satış mühendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.

Türk Hillinger markasına ait tüm ürünler

    0 kayıt bulundu

      ALFABETİK MARKA LİSTESİ

      Sertifikalarımız

      Oruçreis Mah. Tekstilkent Tic. Mrk.
      G2 Blok, No:101 (10AD-Z77)
      34235 Esenler / ISTANBUL
      T: +90 212 235 95 35 / 36
      F: +90 212 235 95 37

      info@imajteknik.com

      E-Bülten Listemize üye olun !

      Gelişmelerden haberdan olmak ve ileride gerçekleştirilecek yeniliklerimizden haberdan olabilmek için e-posta adresinizi bizimle paylaşın!