Absolute inductive encoder with robust ball bearings IxA 608

Leine Linde

IxA 608 - Absolute inductive encoder with robust ball bearings

The 608 absolute position encoder can be provided as multiturn encoder in solid or hollow shaft design. The inductive scanning in combination with robust ball bearing allows high durability in demanding environments. This 58mm product is well known and highly used in the market. You can get the singleturn version as IxA 607 encoder.

 

Technical data  
Shaft type - Solid shaft: 6, 10mm (round)
- Hollow shaft: 12 mm through-going or blind (SSI, EnDat), 12 mm blind (Bus)
Flange type - Solid: ø58mm synchro, ø58mm clamping
- Hollow shaft: ø58mm with stator coupling
Resolution Absolute: 25 bit (13 bit singleturn + 12 bit multiturn)
Output signal Absolute: SSI, EnDat, PROFIBUS, PROFINET, CANopen, DeviceNet, SSI/HTL, SSI/RS-422
Connection - SSI/EnDat: M23, cable
- Fieldbus: M12, screw terminal
Protection class IP 67 (acc. to IEC 60529)
Temperature range Variants up to -40°...+100°C
Special feature Inductive scanning
  • PITCHMO® 600

    7418 - LEINE LINDE SYSTEMS,PITCHMO® 600,Robust and flexible position sensor for optimizing turbine control.

  • YAWMO® 600

    LEINE LINDE SYSTEMS,ll-systems,Leine & Linde,Leine Linde,Leine-Linde,LEINE LINDE SYSTEMS,LEINE LINDE SYSTEMS,LEINE LINDE SYSTEMS,LEINE LIND,LEINE LINDE SYSTEMS,Position sensor & limit switch,YAWMO®,YAWMO® 600

  • PITCHMO® 900

    LEINE LINDE SYSTEMS,Position sensor & limit switch.,PITCHMO® 900

  • Slip ring with a contactless rotary joint SF020

    LEINE LINDE SYSTEMS, contactless rotary joint,SF020 - Slip ring with a contactless rotary joint,Slip ring with a contactless rotary joint SF020,LEINE LINDE SYSTEMS,ll-systems,Leine & Linde,Leine Linde,Leine-Linde,LEINE LINDE SYSTEMS,LEINE LINDE SYSTEMS,Generator slip ring,Slip rings,sliprings,slıprıng,slıprıngs,LEINE LINDE SYSTEMS GmbH,diagnostic system,ADSR® diagnostic system,LEINE LINDE SYSTEMS GmbH - Contactless rotary joints,Contactless rotary joints,LEINE LINDE SYSTEMS GmbH - Functional Safety,Functional Safety,LEINE LINDE SYSTEMS GmbH - Generator slip ring,Generator slip ring, LEINE LINDE SYSTEMS GmbH - Optical rotary joints,Optical rotary joints,LEINE LINDE SYSTEMS GmbH - Power & signals,Power & signals,Slip ring with code wheel,Slip ring with a terminal box,Standard slip ring,Kayma halkaları ADSR ® teşhis sistemi,Temassız döner mafsallar,İşlevsel Güvenlik,Jeneratör kayma halkası,Optik döner bağlantılar,Güç ve sinyaller,ADSR® diagnostic system,Contactless rotary joints,Functional Safety,Generator slip ring,Optical rotary joints,Power & signals,Generator slip ring , rotary joint,contactless rotary joint,contactless rotary joint,Slip ring with integrated diagnostic system,Encoder diagnostic system,Slip ring with integrated functionally safe encoder,slip ring,Optical rotary joints,fiber optic rotary joint,Slip ring with code wheel,Slip ring with a terminal box,Slip ring with connectors,Standard slip ring with

  • YAWMO® 900

    LEINE LINDE SYSTEMS,Ice sensor,CF032 - contactless rotary joint,LEINE LINDE SYSTEMS,,LEINE LINDE SYSTEMS,Position sensor & limit switch,YAWMO®,YAWMO® 900,Position sensor & limit switch.,Robust and flexible position sensor for optimizing turbine control.The YAWMO®-/PITCHMO® 600 is based on the ISA 600 series and detects the exact position of a wind turbine nacelle and the angle of each rotor blade. The tried and tested singleturn and multi-turn rotary encoder renders the position – via inductive scanning – immune to vibration, moisture, dust, heat and cold. Large-diameter ball bearings reduce the number of costly components and obviates the need for a conventional bearing block. The wide selection of fieldbus interfaces ensures compatibility with almost any kind of wind turbine control system. The 19-bit encoder/single-turn resolution is further optimized by a backlashed, customer-specific gear so that permanent contact with the gearing of the wind turbine can be guaranteed at all times.

ALFABETİK MARKA LİSTESİ

Sertifikalarımız

Oruçreis Mah. Tekstilkent Tic. Mrk.
G2 Blok, No:101 (10AD-Z77)
34235 Esenler / ISTANBUL
T: +90 212 235 95 35 / 36
F: +90 212 235 95 37

info@imajteknik.com

E-Bülten Listemize üye olun !

Gelişmelerden haberdan olmak ve ileride gerçekleştirilecek yeniliklerimizden haberdan olabilmek için e-posta adresinizi bizimle paylaşın!