MEGATRON Elektronik Contactless Hall Effect Encoder Series ENA22PM - EcoTurn®
Key Data
Resolution: Absolute 12 Bit
Protection Class: Up to IP65
Technology: Hall Effect
Measurement Range: Multiturn
Output Signal: Analog
Special Features
Alternative to multiturn-potentiometers
Start and end points easily set in field via dry contacts
10° bis 200 x 360°
Ø22 mm housing with bushing
12 bit resolution
Analog output: 0..10 V
Supply voltage 16..30 V
> 25 million turns life
Product Description
The Series ENA22PM allows a flexible and exact adjusting of the start and end point as well as the direction of the signal by the customer. The counter state of up to 200 turns is stored in a nonvolatile memory. During power off it is possible to turn the shaft ±179° without loss of the position value.
MEGATRON Elektronik Contactless Hall Effect Encoder Series ENA22PM - EcoTurn® Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır
CANopenCANopen resolution/revolution: 16 bit = 65,536 steps
Tamagawa ROTARY ENCODERS FA-CODER® (INCREMENTAL )Tamagawa ROTARY ENCODERS FA-CODER® (INCREMENTAL ) Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,Incremental encoders generate pulses in a frequency proportional to the rotational speed.The encoders can be used for speed control, position control, or as a rotation indicator or a pulse generator of servo motors mounted in machine tools, robots, or measuring equipment.Optical incremental encoders are composed of rotor plate, fixed slit, light emitting diodes, photo transistors, etc. as shown in Figure 1.The fixed slit is designed to have 90 degree phase difference to the slit on the rotor plate.Output signals are two signals with 90 degrees difference; A-phase signal and B-phase signal, and the rotational direction can be detected with them.There are encoders which output the additional Z-phase signal as the origin signal.When controlling positions with an incremental encoder, the Z signal which shows the origin is used.
(Rotary encoders,Incremental encoders,Absolute encoders,)
Tamagawa Resolver TS5132N14Tamagawa Resolver TS5132N14 Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,TS5132N14