Precia Molen Indicators I 200 B/M Ex
The I 200 Ex indicator is adapted for weighing installations in hazardous areas. It complies with the ATEX 94/9/CE directive and may be installed in hazardous areas for risks related to the presence of dust (zone 20, 21 or 22) or gas (zone 1 or 2).
The I 200 Ex indicator power supply may be different depending on your installation and operation constraints:
-
Power supply with intrinsic safety outside hazardous areas: ISIS 2
-
An I200 Ex P1/P1-S power supply in hazardous areas.
-
A BATSI rechargeable battery for mobile weighing stations.
The I 200 Ex indicators range is composed of two models:
-
I 200 B Ex (Counting, Preset tare,etc.)
-
I 200 M Ex (Simple weighing : reception, shipping, transport, etc.
Counting with or without tolerance control, Formulation, Control + -, Animal weighing, Calculation, …). Memorization of 10 preset tare values. As an option, I 200 Ex indicators are provided with a data storage device in which all weighings can be recorded, thus avoiding the addition of a control printer (tally roll printer). The I 200 Ex indicator is all 304L STAINLESS STEEL and is specially designed for severe industrial environments.
It is protected according to IP 66* rate (dust tight and resistant to water jets), and this model is ideal for satisfying hygiene and cleanliness requirements of the agronomic-food processing industry, as well as chemical and pharmaceutical industries.
Precia Molen Ürünleri ile uygun rekabetçi fiyatları almak için müşteri temsilcimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış mühendislerimiz en kısa zamanda sizinle irtibat kuracaklardır
Precia-Molen Process Weighing Software I 410 PWSPrecia Molen Ürünleri ile uygun rekabetçi fiyatları almak için müşteri temsilcimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış mühendislerimiz en kısa zamanda sizinle irtibat kuracaklardır,PRECIA MOLEN,PROCESS WEIGHING SOFTWARE I 410 PWS,Precia Molen
Compression load cell TSL – From 5 to 30 tPRECIA MOLEN COMPRESSION LOAD CELL TSL – FROM 5 TO 30 T
The TSL load cell is a low profile compression load cell made of welded hermetically sealed stainless steel.
Precision up to ± 0.05%. Spherical load button for optimum alignment of the load.
Allowable forces on the kit:
The maximum static horizontal force along the centre line of the locking strip (1) is 8 kN.
The maximum vertical tear off force is 20 kN for the 15 t kit and 35 kN for the 30 t kit.
Compression load cell SCL – From 35 to 55 tPrecia-Molen Compression load cell SCL – From 35 to 55 t
The measurement principle used in the SCL load cell is based on the deformation of beams to which a compression force is applied. It uses strain gauges arranged to form a Wheatstone bridge for conversion of the force to an electrical signal. The SCL load cell is specially designed to be insensitive to excentrical loads while remaining compact.