IPMS® ice prevention and monitoring system

LEINE LINDE Ice sensor

IPMS® ice prevention and monitoring system

Whether retrofitted or integrated during wind turbine assembly in the manufacturer’s plant: IPMS®monitors the weather conditions based on multiple parameters. The integrated, highly-accurate sensor system detects the risk of frost/ice formation at the installation site and automatically sends an e-mail notification. Including system status and current measurement data.

Now the owner or operator can use a PC or smartphone to analyze measurement data or perform a remote visual inspection via the heated network camera mounted to the roof of the nacelle. At any time day or night thanks to a remotely-controlled LED spotlight. The wind turbine can be switched off by the operator in manual mode or shut down automatically when the alert level configured in the IPMS® is triggered. IPMS® automatically sends a notification once safe, ice-free operation is possible again. The wind turbine operation can be approved remotely after a second visual inspection via the network camera.

Technical data  
Measuring range 0...100% rF; -40...+60°C
Connection to WT control unit: 4 x potential-free changeover contacts for ice warning, system active, fault, calibration statuses; switching load of 12 V/10 mA to 250 VAC/6 A
Connection for external communication: DSL/network connection (two IP addresses required for operation), optional: 3G or 4G, fieldbus
Output signal 2x changeover contacts, floating
Modbus and OPC possible
Input signal Additional external sensors and signals can be connected
Power supply 230V/50 Hz, 110V/60 Hz, max. 600 W
Protection class Internal: IP 54, External: IP 64, IP 66
Temperature range Sensor technology: ?40°C … 60°C, Network camera: ? 40°C … 55°C
Additional features Optional: Wind turbine support structure, overvoltage protection, project-specific connection cables, Roxtec roof outlets for VKS 2, rain sensor, LAN or LTE router

 

  • YAWMO® 600

    LEINE LINDE SYSTEMS,ll-systems,Leine & Linde,Leine Linde,Leine-Linde,LEINE LINDE SYSTEMS,LEINE LINDE SYSTEMS,LEINE LINDE SYSTEMS,LEINE LIND,LEINE LINDE SYSTEMS,Position sensor & limit switch,YAWMO®,YAWMO® 600

  • Slip ring with a terminal box SC168-11/09-K05

    LEINE LINDE SYSTEMS,ll-systems,Leine & Linde,Leine Linde,Leine-Linde,slip ring,SC168-03/05-X01 -Power & signals, Slip ring with code wheel,Generator slip ring,SC168-03/05-X01 - Slip ring with code wheel,SC168-11/09-K05 - Slip ring with a terminal box,Standard slip ring,Kayma halkaları ADSR ® teşhis sistemi,Temassız döner mafsallar,İşlevsel Güvenlik,Jeneratör kayma halkası,Optik döner bağlantılar,Güç ve sinyaller,ADSR® diagnostic system,Contactless rotary joints,Functional Safety,Generator slip ring,Optical rotary joints,Power & signals,Generator slip ring , rotary joint,contactless rotary joint,contactless rotary joint,Slip ring with integrated diagnostic system,Encoder diagnostic system,Slip ring with integrated functionally safe encoder,slip ring,Optical rotary joints,fiber optic rotary joint,Slip ring with code wheel,Slip ring with a terminal box,Slip ring with connectors,Standard slip ring with connectors,slip ring transfers field buses such as Ethernet, Profibus,

  • YAWMO® 900

    LEINE LINDE SYSTEMS,Ice sensor,CF032 - contactless rotary joint,LEINE LINDE SYSTEMS,,LEINE LINDE SYSTEMS,Position sensor & limit switch,YAWMO®,YAWMO® 900,Position sensor & limit switch.,Robust and flexible position sensor for optimizing turbine control.The YAWMO®-/PITCHMO® 600 is based on the ISA 600 series and detects the exact position of a wind turbine nacelle and the angle of each rotor blade. The tried and tested singleturn and multi-turn rotary encoder renders the position – via inductive scanning – immune to vibration, moisture, dust, heat and cold. Large-diameter ball bearings reduce the number of costly components and obviates the need for a conventional bearing block. The wide selection of fieldbus interfaces ensures compatibility with almost any kind of wind turbine control system. The 19-bit encoder/single-turn resolution is further optimized by a backlashed, customer-specific gear so that permanent contact with the gearing of the wind turbine can be guaranteed at all times.

  • PITCHMO® 900

    LEINE LINDE SYSTEMS,Position sensor & limit switch.,PITCHMO® 900

  • SC168-03/05-X01 - Slip ring with code wheel

    LEINE LINDE SYSTEMS,ll-systems,Leine & Linde,Leine Linde,Leine-Linde,LEINE LINDE SYSTEMS,SC168-03/05-X01 -Power & signals, Slip ring with code wheel,Generator slip ring,SC168-03/05-X01 - Slip ring with code wheel,Slip ring with a terminal box,Standard slip ring,Kayma halkaları ADSR ® teşhis sistemi,Temassız döner mafsallar,İşlevsel Güvenlik,Jeneratör kayma halkası,Optik döner bağlantılar,Güç ve sinyaller,ADSR® diagnostic system,Contactless rotary joints,Functional Safety,Generator slip ring,Optical rotary joints,Power & signals,Generator slip ring , rotary joint,contactless rotary joint,contactless rotary joint,Slip ring with integrated diagnostic system,Encoder diagnostic system,Slip ring with integrated functionally safe encoder,slip ring,Optical rotary joints,fiber optic rotary joint,Slip ring with code wheel,Slip ring with a terminal box,Slip ring with connectors,Standard slip ring with connectors,slip ring transfers field buses such as Ethernet, Profibus,

ALFABETİK MARKA LİSTESİ

Sertifikalarımız

Oruçreis Mah. Tekstilkent Tic. Mrk.
G2 Blok, No:101 (10AD-Z77)
34235 Esenler / ISTANBUL
T: +90 212 235 95 35 / 36
F: +90 212 235 95 37

info@imajteknik.com

E-Bülten Listemize üye olun !

Gelişmelerden haberdan olmak ve ileride gerçekleştirilecek yeniliklerimizden haberdan olabilmek için e-posta adresinizi bizimle paylaşın!