MEGATRON Elektronik Potentiometric Linear Transducer Series SPR18 Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,In the displacement sensor series SPR18 the mechanical detection of linear movement is done by a front and rear guided push rod with accurate sleeve bearings and outside spring return device. This construction makes the SPR18 sensor robust for linear motion operation with spring return device. Due to his compact industrial design with 18x18mm in the profile and his spring return device a space saving and easy integration can be reached up to 100 mm measurement stroke. To ensure high accuracy and long lifetime for a good price performance ratio the potentiometric measuring principle is realized with a high-resolution conductive plastic resistance element. Since the potentiometric measuring principle delivers absolute values and requires no electronic conversion, the position feedback signal is true power on without delay, temperature stable and robust against EMC influences. For mounting the SPR18 has four fixing clams which are included in the scope of supply. The SPR18 sensor is available with plug or cable connection.

MEGATRON Elektronik Incremental Linear Transducer Series MS50 Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,The MS50 series is the economic version of our incremental linear encoders. The mechanical detection of linear movement is done by a front guided push rod with inside spring return device. To reach high accuracy the push rod is guided with precise sleeve bearings. The precise sleeve bearings are placed inside the shaft with the fitting diameter of 8mmh6. On the push rod an accurate glass scale is mounted. Inside the sensor housing the glass scale passes an electronic board with optical detector which generates counting pulses in TTL or Line Driver level up to 5µm resolution. Due to the glass material the measurement is very temperature stable.

MEGATRON Elektronik Shear Beam Series Series KT302 Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır., Shear Beam Series Series KT302,Series KT302 force sensors are double bending beam sensors and due to this shape less sensitive to excentric force application. According to their flat shape the could be easily used in low space applications.

MEGATRON Elektronik Power Resistors UT Series Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,The recommended optimal operating temperature for the UT series is 275°C, the maximum ambient should not exceed 350°C. The wrapping of the UT consists of a high temperature resisting compound, this allows the use also under difficult environmental conditions. The production process of the UT resistors is under a 100% quality control. UT resistors are MIL certified. Typical applications are current and voltage control units, power and charging management systems, electronics for renewable energy systems etc.

Series name: CT-9 adjustment turns:18