MEGATRON Elektronik Potentiometric Linear Transducer Series SPR18 Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,In the displacement sensor series SPR18 the mechanical detection of linear movement is done by a front and rear guided push rod with accurate sleeve bearings and outside spring return device. This construction makes the SPR18 sensor robust for linear motion operation with spring return device. Due to his compact industrial design with 18x18mm in the profile and his spring return device a space saving and easy integration can be reached up to 100 mm measurement stroke. To ensure high accuracy and long lifetime for a good price performance ratio the potentiometric measuring principle is realized with a high-resolution conductive plastic resistance element. Since the potentiometric measuring principle delivers absolute values and requires no electronic conversion, the position feedback signal is true power on without delay, temperature stable and robust against EMC influences. For mounting the SPR18 has four fixing clams which are included in the scope of supply. The SPR18 sensor is available with plug or cable connection.

IMA2-R amplifiers are complete signal processing units for potentiometric transducers and convert potentiometric output signals to standardized signals. The connected sensor is powered with 5 V by default (supply voltages between 0 and 10 V could be realised on request) Most of commonly used output signals (0..5 V, 0..10 V, ±5 V, ±10 V, 0..20 mA, 4..20 mA) are available. The amplifier housing (Phoenix / UEGM) is designed for mounting rails.

MEGATRON Elektronik Conductive Plastic Potentiometer Series MP21 Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.​,The series MP21 is applicable as accurate setpoint device or in mechanically driven sensor applications. Optional it is possible to seal the bearing (IP65).,MEGATRON Elektronik Conductive Plastic Potentiometer Series MP21

MEGATRON Elektronik Inductive Transducer Series EDCT with Integrated Electronics Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,For more comfortable electronic integration of inductive displacement sensors the economic EDCT series is realized. The mechanical detection of linear movement is done by a front guided push rod with accurate sleeve bearing and outside spring return device. The inductive measurement principle of the EDCT is configured with a casted spool in LVDT winding and a transformation core mounted on the push rod. In addition to the coil the electronic amplifier is placed in the sensor housing. The integrated electronic converts the position feedback signal of the core between the LVDT coils into the typical form of 0..10 V or 4..20 mA. Due to the contactless measurement principle long lifetime can be reached and permits high dynamic application, especially if small oscillating movement has to be detected. The inductive measurement delivers absolute values, is true power on and has high resolution also for movement in micro step. With IP40 protection and ±0,7% independent Linearity the EDCT is the economic version for the inductive linear transducer series.

MEGATRON Elektronik S-Beam Series KT1101 Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.Series KT1101 force sensors are characterized by their rugged structure. The sensor body is S shaped and is produced from one piece of steel. Force application occures by bearing area of hexagonal bolt.