MEGATRON Elektronik Shear Beam Series KM200-10N

MEGATRON Elektronik  Load Cells  

Shear Beam Series KM200-10N

Key Data

Nominal Load: From 0..10 N 
Output Signal: 0,6 mV/V 
Output: Without Amplifier 
Direction of Force: Tension and Compression 
Design: Shear Beam 
Protection Class: IP65 

Special Features

Capacity 0..10 N

Calibration either in tension or compression

Aluminium loadcell

Compact design

Cost-optimized sensor element for OEM applications

Very small off center load error (typ. 0,02%/mm)

Product Description

Series KM200 force sensors are double bending beam sensors and due to this shape less sensitive to excentric force application.

This sensors are offered without built in amplifier, but could be combined with our external amplifiers and panel meters.

MEGATRON Elektronik Shear Beam Series KM200-10N Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile  http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.

  • MEGATRON Elektronik Inductive Transducer Series EDCT with Integrated Electronics

    MEGATRON Elektronik Inductive Transducer Series EDCT with Integrated Electronics Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,For more comfortable electronic integration of inductive displacement sensors the economic EDCT series is realized. The mechanical detection of linear movement is done by a front guided push rod with accurate sleeve bearing and outside spring return device. The inductive measurement principle of the EDCT is configured with a casted spool in LVDT winding and a transformation core mounted on the push rod. In addition to the coil the electronic amplifier is placed in the sensor housing. The integrated electronic converts the position feedback signal of the core between the LVDT coils into the typical form of 0..10 V or 4..20 mA. Due to the contactless measurement principle long lifetime can be reached and permits high dynamic application, especially if small oscillating movement has to be detected. The inductive measurement delivers absolute values, is true power on and has high resolution also for movement in micro step. With IP40 protection and ±0,7% independent Linearity the EDCT is the economic version for the inductive linear transducer series.

  • MEGATRON Elektronik S-Beam Series KT1401

    MEGATRON Elektronik S-Beam Series KT1401 Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,Series KT1401 force transducer are very compact models and do not differ in their dimensions over all offered capacities. Because of their shape (S-Beam) this force transducers are recommended for applications with tension force especially. Force is applicated by M8 internal screw thread. DMS Wheatstonebridges (measuring principle) have delivered an optimal performance since decades and ensures a long lifetime.

  • MEGATRON Elektronik​ Hall-Effect Multiturn Absolute Encoder Series MAB36APM

    MEGATRON Elektronik​ Hall-Effect Multiturn Absolute Encoder Series MAB36APM Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.​, The Series MAB36APM allows a flexible and exact adjusting of the start and end point as well as the direction of the signal by the customer. The counter state of up to 200 turns is stored in a nonvolatile memory. During power off it is possible to turn the shaft ±179° without loss of the position value.

  • MEGATRON Elektronik Potentiometric Linear Transducer Series RC35

    MEGATRON Elektronik Potentiometric Linear Transducer Series RC35 Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,In the displacement sensor series RC35 the mechanical detection of linear movement is done by a front guided push rod with accurate sleeve bearings. For easy mechanical coupling the sensor is equipped with strong ball joints. Due to his robust design in IP65 protection the sensor can be used in rough environmental conditions. To ensure high accuracy and long lifetime for a good price performance ratio the potentiometric measuring principle is realized with a high-resolution conductive plastic resistance element. Since the potentiometric measuring principle delivers absolute values and requires no electronic conversion, the position feedback signal is true power on without delay, temperature stable and robust against EMC influences. The RC35 sensor is available with plug or cable connection.

  • Contactless Hall Effect Encoder Series ENS22B manual encoder- EcoTurn®

    Economic sensor with serial output and different interfaces

ALFABETİK MARKA LİSTESİ

Sertifikalarımız

Oruçreis Mah. Tekstilkent Tic. Mrk.
G2 Blok, No:101 (10AD-Z77)
34235 Esenler / ISTANBUL
T: +90 212 235 95 35 / 36
F: +90 212 235 95 37

info@imajteknik.com

E-Bülten Listemize üye olun !

Gelişmelerden haberdan olmak ve ileride gerçekleştirilecek yeniliklerimizden haberdan olabilmek için e-posta adresinizi bizimle paylaşın!