Grein / EDGES

Are made of a special rubber sheath within which is housed the sensor element which provides an electrical signal when any external crushing action is exerted on the board. A profile of aluminum plate or angle the device to complete its attachment to the machine. These devices are designed to prevent injury to personnel against crushing by moving parts as sliding doors, gates, elevators, etc. plans. detecting an electrical contact via a control circuit. The profile of the sheath is designed to ensure reliable performance even at the slightest pressure, both on top and on one side.

The system is guaranteed for a security level 1 or 3 "FAIL SAFE" in accordance with the use of control units and the number of conductors connected to the strip. These edges are available in a wide range of materials.

For the selection of different models see pp. 34 and 35 of the Catalog 2010 .

FEATURES

low pressure crushing

operating angle exceeding 45°

use of technology switches tape

APPLICATIONS

Are made of a special rubber sheath within which is housed the sensor element which provides an electrical signal when any external crushing action is exerted on the board. A profile of aluminum plate or angle the device to complete its attachment to the machine

TECHNICAL NOTE

Grein ​Safety curved edges

Are offered to solve the problem of curvature in a simple, since the various elements are placed on the machine to be protected without the need for bending the lead wire leading mechanical rather complicated and expensive.

The radius of curvature is not bound and the customer can choose the value of the radius of curvature in accordance with their security.

configuration tailored reviews

low pressure crushing

no prior preparation of the radius

lower listing than the types of metal aluminum

availability for the types GR-503, GR-747, GR-748

elements PVC 90mm. easily put together on site

length of the board at the request of the customer

minimum radius of curvature mt. 1.5 (not recommended fall below mt.2)