Pavone Sistemi Load Cells Compression 220
- Truck scales
- Hopper for processweighing
- Tank & silo weighing
- Harsh environment
- Capacities 5 - 50 Ton
- Stainless steel construction
- OIML R60 and NTEP approved
- IP68 Protection
- EEx ia IIC T6 hazardous area approval
- FM approval available
| CAPACITY |
A |
B |
C |
D |
E |
F |
G |
H |
J |
K |
W |
R |
| 5 t |
80 |
25 |
71 |
7 |
34 |
43 |
20 |
30 |
35 |
70 |
1 |
31 |
| 10 t |
92 |
25 |
75 |
6 |
34 |
43 |
15 |
33 |
35 |
80 |
2 |
31 |
| 20÷30 t |
110 |
28 |
101 |
8 |
39 |
- |
26 |
50 |
- |
102 |
2 |
31 |
| 50 t |
125 |
41 |
112 |
8 |
49 |
- |
29 |
58 |
- |
115 |
2 |
37 |
TECHNICAL CHARACTERISTICS 220
| Rated load (R.L.): |
5000, 10000, 20000, 30000, 50000*** kg |
| NTEP/OIML Accuracy class: |
NTEP, OIML C3 |
| Maximum no. of intervals (n): |
3000 |
| Y = Emax/Vmin: |
14000 |
| Rated output (R.O.): |
2.0 mV/V |
| Repeatability: |
0.1% of R.O. |
| Zero balance: |
2% of R.O. |
| Creep (30 minutes): |
0.0170 +/-% of applied load |
| Combined error: |
0.0200 % of R.O. |
| Temp. effect (-10° to +50°C) on zero balance: |
0.0010 % of R.O./°C |
| Temp. effect (-10°C to +50°C) on output: |
0.0010 % of applied load/°C |
| Compensated temperature Range: |
-10 ÷ +40 °C |
| Temperature range: |
-30 ÷ +70 °C |
| Safe overload: |
150% of R.L. |
| Maximum overload: |
300% of R.L. |
| Recommended input: |
10 Vdc/Vac |
| Maximum excitation: |
20 Vdc/Vac |
| Input resistance: |
1065 ± 60 Ohm |
| Output resistance: |
1025 ± 20 Ohm |
| Insulation resistance: |
>2000 M Ohm |
| Cable length: |
5m (5T), 10m (10 & 20T), 20m (30 & 50T) |
| Cable type: |
6 wires, braided, Polyurethane, double floating screen Standard |
| Material: |
Stainless steel |
| Degree of protection: |
IP68 |
Compression load cell SCL – From 35 to 55 tPrecia-Molen Compression load cell SCL – From 35 to 55 t
The measurement principle used in the SCL load cell is based on the deformation of beams to which a compression force is applied. It uses strain gauges arranged to form a Wheatstone bridge for conversion of the force to an electrical signal. The SCL load cell is specially designed to be insensitive to excentrical loads while remaining compact.
MEGATRON Elektronik S-Beam Series KM1401MEGATRON Elektronik S-Beam Series KM1401 Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.,Series KM1401 force transducer are very compact models and do not differ in their dimensions over all offered capacities. Because of their shape (S-Beam) this force transducers are recommended for applications with tension force especially. Force is applicated by M8 internal screw thread. DMS Wheatstonebridges (measuring principle) have delivered an optimal performance since decades and ensures a long lifetime.
Compression digital load cell CDL – 30tPrecia-Molen Compression digital load cell CDL – 30t
The CDL compression digital load cell uses the measurement principle by distortion of beams submitted to a compression strain. It uses strain gauges mounted in Wheatstone bridges for the conversion of strength into an electrical signal.
The CDL has been designed to be little sensitive to load offcentring while keeping small dimensions.
Made of Stainless Steel (304L), the CDL is waterproof in prolonged immersion (IP68) and high pressure cleaning (IP69K)