Process Sensors
Electronic Flow Sensors FS602
Specification
Voltage Supply Vs: |
Vs = 20...30 VDC / Vs = 85...265 VAC |
Output Signal: |
PNP, NO/NC Current Consumption: < 60 mA
|
Switch Accuracy: |
±1 ... ±10 cm/s |
Response Time: |
Preheating ~3 min |
Port Material: |
Stainless Steel (ANSI316L) |
Housing Material: |
Stainless Steel (ANSI316L) |
Ambient Temperature: |
-20...80°C |
Medium Temperature: |
-20...80°C |
Degree of Protection: |
IP67 |
|
|
Download: |
|
|
|
Introduction
● Stainless Steel Housing
● M12 Connector for easy Connection
● Standard Thread for Pipe Connection
● Degree of Protection IP67
● Adopts Advanced Temperature Difference Technology to measure Flow Rate of Medium
(on the Basis of Temperature Difference Technology)
● Converts Flow Rate to Electrical Signal (identified and transmitted by Internal Processor)
● Applied in Gas and Liquid Measurement, Cutting Oil, Cooling Fluid, Lubrication Fluid
and Circulating Water with High Accuracy
Electronic Flow Sensors FS604
Specification
Voltage Supply Vs: |
Vs = 20...30 VDC / Vs = 85...265 VAC |
Output Signal: |
PNP, NO/NC Current Consumption: < 60 mA |
Switch Accuracy: |
±1...±10 cm/s |
Output Accuracy: |
±10%: 4...20 mA Output |
Response Time: |
1...10 S-typ. 2s |
Port Material: |
Stainless Steel (ANSI316L) |
Housing Material: |
Stainless Steel (ANSI316L) |
Ambient Temperature: |
-20...80°C |
Medium Temperature: |
-20...80°C |
Degree of Protection: |
IP67 |
Download: |
|
|
|
Introduction
● Stainless Steel Housing
● M12 Connector for easy Connection
● Standard Thread for Pipe Connection
● Degree of Protection IP67
● Advanced Temperature Difference Technology to measure Flow Rate of Medium
● Equipped with Switch and Analogue Output to use in Upper Monitor
and to monitor the State of System Pipes
● Can set Flow Rate Alarm by Panel Buttons in accordance with Requirements
● Applied in Gas and Liquid Measurement, Cutting Oil, Cooling Fluid, Lubrication Fluid
and Circulating Water with High Accuracy