Instant relay / plug-in / DC / AC Model 126
INSTANTANEOUS AND FUNCTION RELAYS
Instantaneous relays 3 contacts / 1266
| |
|
1266
rear wiring socket with clips 9266
front wiring socket with clips 9946-20
front wiring socket / screw terminals 9946-10
embase PAR à clips 9266 |
| |
DESCRIPTION |
| |
Instantaneous relay 1, 2 or 3 CO contacts.
Pluggable on front wiring socket (9946) or rear wiring socket (9266)
Detailed table of coil resistance data is available in the technical support pages of this site or can be sent upon request.
|
| |
Dimensions |
|
Connection |
| |
|
|
|
| |
 |
|
 |
 |
TECHNICAL FEATURES |
| |
Function |
instantaneous |
| |
Presentation |
under cober |
| |
Connection |
on rear or front wiring socket |
| |
Number of mechanical operations |
10.000.000 |
| |
Operating temperature |
- 10 to + 40°C |
| |
Storage temperature |
- 40°C to + 80°C |
| |
Climatic protection |
reinforced climatic protection |
| |
Shock voltage |
15 g - 11 ms |
| |
Dielectric strength |
2 KV-50 Hz-1 min at 40°C and 70% HR |
| |
Insulation resistance |
> 200 MOhms |
| |
Weight |
79 g. |
| |
COIL DATA |
| |
|
Direct current |
Alternative current |
| |
Min. nominal voltage DC |
6 V |
6 V |
| |
Min. nominal voltage AC |
220 V |
400 V |
| |
Operating range |
-20/+10% of nominal voltage |
| |
Power requirement |
2 inv : 0,25 W - 3 inv : 0,5 to 2,2W |
3 to 4,5 VA |
1,6 to 3 VA |
| |
CONTACTS |
| |
Number of contacts |
1, 2 or 3 |
| |
Contacts material |
silver alloy with gold flash |
| |
Max. load current |
8 A per contact |
| |
Low power switching |
40 mA min for 6 V |
| |
Short-circuit load |
250 A / 30 ms |
| |
Response time |
DC < 12 ms - AC < 17 ms |
| |
Bounce time |
< 7 ms |
|
CONTACTS RATING |
|
| |
DIRECT CURRENT |
| |
| resistive load |
|
inductive load L/R = 20 ms |
|
|
|
 |
|
 |
|
|
| |
ALTERNATIVE CURRENT |
| |
| resistive load |
|
inductive load cos phi = 0.7 |
|
|
|
 |
|
 |
|
| |
VERSIONS |
| |
The very wide range of coil consumptions : from 0.25 to 2.2 W in DC current and from 1.6 to 3 VA in AC current permits to use this relay as an output relay of electronic sequencer.
|
Instantaneous relays 2 contacts / Model 19021902 interface module, 2 RT - 5 A
this interface module has a red indicator led (3mm diameter).
The terminal max. width is 18mm, except for 220 V AC version which has 23mm of width.
1902 module fixing is adapted for symetricals and asymetricals din rails.
INSTANTANEOUS AND FUNCTION RELAYS 2 contac / Model CSPImpulse relay with fixed duration - 2 CO contacts - 6 A.
CSP relay is equipped in its standard version of : a locking system with elastic clips on the basis and clasps on the cover, two hexagonal withdrawal clasps permitting up to 36 possibilities (voltage, function) and a removable label-holder on front face.
Pluggable on the following sockets : SVB, SPVB, SVDL, SPVDL, SRDL 4,8 and SRC.
Instantaneous relays 1 contact / Model BIV-105TEC Automatismes ,Instantaneous relays 1 contacts / BIV-105,
Monostable instantaneous relay. 1 RT - 10 A
BIV-105 are terminals for mounting onto rails of 35 mm or G.
They are characterized by a compact conception incorporating an instantaneous relay 1 RT - 10 A.
Its special character makes it a basic element for system interfaces realization
Instantaneous relays 2 contacts / Model CAQMTI Instantaneous relays 2 contacts / CAQ Instantaneous relay with rapid memory,
Pluggable on socket with a withdrawal clasp and square guide pins which can act as a key to ensure that the correct relay is used at the correct voltage