Instantaneous relays 1 contacts / BIV-105
Description
Monostable instantaneous relay. 1 RT - 10 A
BIV-105 are terminals for mounting onto rails of 35 mm or G.
They are characterized by a compact conception incorporating an instantaneous relay 1 RT - 10 A.
Its special character makes it a basic element for system interfaces realization.
Dimensions
![](http://www.tec-automatismes.com/_upload/ressources/relais/instantanes/ang-encombrement-biv.jpg)
Connection
![](http://www.tec-automatismes.com/_upload/ressources/relais/instantanes/raccordement-biv.jpg)
Technical features
Function |
Instantaneous |
Presentation |
Under case |
Connection |
onto rails C or G |
Number of mechanical operations |
5.000.000 |
Operating temperature |
-30° C +40° C |
Climatic protection |
Reinforced climatic protection |
Shock voltage |
3 000 V crête |
Dielectric strength |
between coil and contacts - 2 000 V eff |
Insulation resistance |
> 1000 MOhms |
Operate time |
DC: 10 ms AC: 12 ms |
Release time |
DC, AC: 5 ms |
Coil data
|
Direct current |
Alternative current |
Min. nominal voltage DC |
6 - 12 -24 - 48 - 125 V |
12 - 24 - 48 - 120 - 230 V |
Power requirement |
0,6 W to1,2 W |
0,6 VA to 2,6 VA |
|
Contacts
Number of contacts |
1 |
Max. load current |
10 A |
Instantaneous relays 2 contacts / Model 1210Tec-Automatismes Model 1210 ınstantaneous relays, model 1210 2 contacts ınstantaneous relays 2 contacts,Instantaneous relays
2 contacts
1210 series
Instantaneous relay 2 or 3 CO contacts.
Pluggable on front wiring socket (9215) or rear wiring socket (9210) - 8 or 11 pins
INSTANTANEOUS AND FUNCTION RELAYS 2 contac / Model CSPImpulse relay with fixed duration - 2 CO contacts - 6 A.
CSP relay is equipped in its standard version of : a locking system with elastic clips on the basis and clasps on the cover, two hexagonal withdrawal clasps permitting up to 36 possibilities (voltage, function) and a removable label-holder on front face.
Pluggable on the following sockets : SVB, SPVB, SVDL, SPVDL, SRDL 4,8 and SRC.
Latching relays 2 contacts / Model CADMTI Latching relays 2 contacts / Model CAD,Latching relay with magnetic hold.Pluggable on socket with a withdrawal clasp and square guide pins which can act as a key to ensure that the correct relay is used at the correct voltage
Flashing relays 2 contacts / Model CSMMultifunction, multi-voltages, multirange timer relay - 2 timed contacts/2 instantaneous contacts - 3 A.
Pluggable on the following sockets : SVB, SPVB, SRC, SVDL, SPVDL and SRDL 4.8.
Flashing relays 2 contacts / Model CAKFlashing relay with fixed rythm - 2 CO contacts - 5 A.
Pluggable on socket with a withdrawal clasp and square guide pins which can act as a key to ensure that the correct relay is used at the correct voltage (see our withdrawal guide inthe technical support pages of this site).
Pluggable on the following sockets : EVB2/CA, ERC2/CA and ERDL2/CA.