Flashing relays 2 contacts / Model CAP

Flashing relays 2 contacts / CAP

INSTANTANEOUS AND FUNCTION RELAYS

rear wiring socket with clips ERDL1/CA
rear wiring socket / PCB mounting ERC1/CA
front wiring socket / screw terminals EVB1/CA

DESCRIPTION

Sabit süreli darbe rölesi. 1 dürtü temas ve 2 CO rehber.

Doğru röle doğru voltajda kullanılmasını sağlamak için bir anahtar olarak hareket edebilir bir geri çekilme toka ve kare kılavuz pimleri ile soket üzerinde Takılabilir ( bu sitenin teknik destek sayfalarında bizim çekilme kılavuzuna bakın )

aşağıdaki yuva üzerinde Takılabilir: EVB1 / CA, ERC1CA veya ERDL1CA.

	Dimensions		Connection

	OPERATION PRINCIPLE
	Impulse relay with fixed duration : * interval between 2 operations >= 1 s * duration of the impulse contact >= 200 ms

	TECHNICAL FEATURES
	Function	Impulse (ET - MT)
	Presentation	under cover
	Connection	on front or rear wiring socket
	Number of mechanical operations	35.000.000
	Operating temperature	- 5°C to + 40°C
	Storage temperature	- 40°C to + 70°C
	Climatic protection	optional reinforced climatic protection
	Shock voltage	3 KV (wave 1,2/50 µs)
	Dielectric strength	2200 V eff
	Insulation resistance	NFC 45-202 & VDE0110 : C250
	Weight	200 g.
	Protection level	IP 40 (according to NFC 20-010)
	Resistance to mechanical shocks	severity 50 A (CEI 68-2-27)
	Resistance to vibrations	0.35 mm / 10-55Hz (CEI 38-2-6)

COIL DATA
	Direct current	Alternative current
Min. nominal voltage DC	12 V	12 V
Min. nominal voltage AC	220 V	230 V 50-60 Hz
Operating range	-20/+10% of nominal voltage
Power requirement	2,2 W +/- 20%	3 VA +/- 20%

	CONTACTS
	Number of contacts	1
	Max. load current	8 A inst. / 4 A impulse
	Low power switching	0,1 VA with min voltage 1 V and/or I min 1 mA
	Response time	DC < 9 ms - AC < 24 ms

CONTACTS RATING

DIRECT CURRENT

instantaneous contacts - connection on DC		X 1.000.000 impulse contacts

ALTERNATIVE CURRENT

connection on AC		X 1.000.000 impulse contacts

	VERSIONS
	* CAP relay with reinforced climatic protection * CAP relay with 3 instantaneous contacts and 1 impulse contact Homologations & conformities : * CEI 255-1-00 * NFC 45-250

Ürün

İsminiz *

Firma İsmi

E-posta Adresi *

Telefon *

Mesajınız

INSTANTANEOUS AND FUNCTION RELAYS 2 contac / Model CSP
Impulse relay with fixed duration - 2 CO contacts - 6 A. CSP relay is equipped in its standard version of : a locking system with elastic clips on the basis and clasps on the cover, two hexagonal withdrawal clasps permitting up to 36 possibilities (voltage, function) and a removable label-holder on front face. Pluggable on the following sockets : SVB, SPVB, SVDL, SPVDL, SRDL 4,8 and SRC.
Instantaneous relays 2 contacts / Model CAQ
MTI Instantaneous relays 2 contacts / CAQ Instantaneous relay with rapid memory, Pluggable on socket with a withdrawal clasp and square guide pins which can act as a key to ensure that the correct relay is used at the correct voltage
Latching relays 2 contacts / Model CAD
MTI Latching relays 2 contacts / Model CAD,Latching relay with magnetic hold.Pluggable on socket with a withdrawal clasp and square guide pins which can act as a key to ensure that the correct relay is used at the correct voltage
Flashing relays 2 contacts / Model CAP
Sabit süreli darbe rölesi. 1 dürtü temas ve 2 CO rehber. Doğru röle doğru voltajda kullanılmasını sağlamak için bir anahtar olarak hareket edebilir bir geri çekilme toka ve kare kılavuz pimleri ile soket üzerinde Takılabilir ( bu sitenin teknik destek sayfalarında bizim çekilme kılavuzuna bakın ) aşağıdaki yuva üzerinde Takılabilir: EVB1 / CA, ERC1CA veya ERDL1CA.
Flashing relays 2 contacts / Model CSM
Multifunction, multi-voltages, multirange timer relay - 2 timed contacts/2 instantaneous contacts - 3 A. Pluggable on the following sockets : SVB, SPVB, SRC, SVDL, SPVDL and SRDL 4.8.

Flashing relays 2 contacts / Model CAP

ALFABETİK MARKA LİSTESİ

Sertifikalarımız

E-Bülten Listemize üye olun !