Flashing relays 2 contacts / Model CSM

Flashing relays 2 contacts / CSM

INSTANTANEOUS AND FUNCTION RELAYS

rear wiring socket with clips SRDL 4.8
rear wiring socket / PCB mounting SRC
front wiring socket with clips SVDL
front wiring socket with clips SPVDL
front wiring socket / screw terminals SVB
front wiring socket / screw terminals SPVB

	DESCRIPTION
	Multifunction, multi-voltages, multirange timer relay - 2 timed contacts/2 instantaneous contacts - 3 A. Pluggable on the following sockets : SVB, SPVB, SRC, SVDL, SPVDL and SRDL 4.8.

	Dimensions		Connection

OPERATION PRINCIPLE

FUNCTIONS :

* ET : timed on voltage application
* MT : timed on voltage lack
* PET : impulse on voltage application
* PMT : impulse on voltage lack
* K : flashing
* T : teleruptor.

TIMING RANGE : 0,1 s to 1 h.

"function" and "range" selection made by switches on front face and timing adjustment by potentiometer. Green and red LEDs indicate voltage and function statement.

CSM relay conforms with EC standard.

See operation diagram hereafter.

	PLAN

	TECHNICAL FEATURES
	Function	timer (ET, MT, PET, PMT, K & T)
	Presentation	under cover
	Connection	pluggable on front or rear cover
	Number of mechanical operations	5.000.000
	Operating temperature	- 10 to + 55°C
	Storage temperature	- 25 to + 70°C
	Shock voltage	5 KV (wave 1,2/50 µs)
	Dielectric strength	1000 to 2200 V Eff
	Protection level	IP20
	Resistance to mechanical shocks	50 g / 11 ms / sinusoïde
	Resistance to vibrations	0.35 mm / 10-55 Hz / semi-sinusoïde
	Operate time	recycling by control cut-off : 10 ms/DC-20 ms/AC
	Release time	recycling by voltage cut-off >= 30 ms

COIL DATA
	Direct current	Alternative current
Min. nominal voltage DC	19 V	19 V
Min. nominal voltage AC	250 V	250 V - 50 or 60 Hz
Operating range	-20% +10% of nominal voltage
Power requirement		3 VA

	CONTACTS
	Number of contacts	2
	Max. load current	3 A
	Low power switching	5 V - 10 mA

CONTACTS RATING

ALTERNATIVE CURRENT

resistive & inductive load

Ürün

İsminiz *

Firma İsmi

E-posta Adresi *

Telefon *

Mesajınız

Flashing relays 2 contacts / Model CAK
Flashing relay with fixed rythm - 2 CO contacts - 5 A. Pluggable on socket with a withdrawal clasp and square guide pins which can act as a key to ensure that the correct relay is used at the correct voltage (see our withdrawal guide inthe technical support pages of this site). Pluggable on the following sockets : EVB2/CA, ERC2/CA and ERDL2/CA.
INSTANTANEOUS AND FUNCTION RELAYS 2 contac / Model CSP
Impulse relay with fixed duration - 2 CO contacts - 6 A. CSP relay is equipped in its standard version of : a locking system with elastic clips on the basis and clasps on the cover, two hexagonal withdrawal clasps permitting up to 36 possibilities (voltage, function) and a removable label-holder on front face. Pluggable on the following sockets : SVB, SPVB, SVDL, SPVDL, SRDL 4,8 and SRC.
Latching relays 2 contacts / Model CAD
MTI Latching relays 2 contacts / Model CAD,Latching relay with magnetic hold.Pluggable on socket with a withdrawal clasp and square guide pins which can act as a key to ensure that the correct relay is used at the correct voltage
Flashing relays 2 contacts / Model CAP
Sabit süreli darbe rölesi. 1 dürtü temas ve 2 CO rehber. Doğru röle doğru voltajda kullanılmasını sağlamak için bir anahtar olarak hareket edebilir bir geri çekilme toka ve kare kılavuz pimleri ile soket üzerinde Takılabilir ( bu sitenin teknik destek sayfalarında bizim çekilme kılavuzuna bakın ) aşağıdaki yuva üzerinde Takılabilir: EVB1 / CA, ERC1CA veya ERDL1CA.
Instantaneous relays 2 contacts / Model CAQ
MTI Instantaneous relays 2 contacts / CAQ Instantaneous relay with rapid memory, Pluggable on socket with a withdrawal clasp and square guide pins which can act as a key to ensure that the correct relay is used at the correct voltage

Flashing relays 2 contacts / Model CSM

ALFABETİK MARKA LİSTESİ

Sertifikalarımız

E-Bülten Listemize üye olun !