Latching relays 2 contacts / Model CAD

MTI

rear wiring socket with clips ERDL2/CA
rear wiring socket / PCB mounting ERC2/CA
front wiring socket / screw terminals EVB2/CA

Description

Latching relay with magnetic hold.

Pluggable on socket with a withdrawal clasp and square guide pins which can act as a key to ensure that the correct relay is used at the correct voltage (see our withdrawal guide in the technical support pages of this site)

Pluggable on the following sockets : EVB2/CA, ERC2/CA, ERDL2/CA.

Dimensions

Connection

Operation principle

Technical features

Function	latching with magnetic hold
Presentation	under cover
Connection	on front or rear wiring socket
Number of mechanical operations	35.000.000
Operating temperature	- 5°C to + 40°C
Storage temperature	- 40°C to + 70°C
Climatic protection	optional reinforced climatic protection
Shock voltage	5 KV (wave 1,2/50 µs)
Dielectric strength	2500 V eff
Insulation resistance	NFC 45-202 : C500 - VDE0110 : C380
Weight	200 g.
Protection level	IP 40 (according to NFC 20-010)

Coil data

	Direct current	Alternative current
Min. nominal voltage DC	12 V	12 V
Min. nominal voltage AC	220 V	230 V
Operating range	-20/+10% of nominal voltage
Power requirement		10 VA +/- 20%	5,5 VA +/- 20%

Contacts

Number of contacts	2
Max. load current	8 A per contact
Low power switching	0,1 VA with min voltage 1 V and/or I min 1 mA
Response time (bounce time not included)	DC < 9 ms - AC < 24 ms

Contacts rating

DIRECT CURRENT

power supply in DC - connection on DC	power supply in AC - connection on DC

ALTERNATIVE CURRENT

power supply in AC or DC - connection on AC

Versions

. CAD relay with reinforced climatic protection
. CAD relay with 3 CO contacts
. CAD relay with control by the -

Homologations & conformities :

* CEI 255-1-00
* NFC 45-350

Latching relays 2 contacts CAD

Ürün

İsminiz *

Firma İsmi

E-posta Adresi *

Telefon *

Mesajınız

Latching relays 2 contacts / Model CAD
MTI Latching relays 2 contacts / Model CAD,Latching relay with magnetic hold.Pluggable on socket with a withdrawal clasp and square guide pins which can act as a key to ensure that the correct relay is used at the correct voltage
INSTANTANEOUS AND FUNCTION RELAYS 2 contac / Model CSP
Impulse relay with fixed duration - 2 CO contacts - 6 A. CSP relay is equipped in its standard version of : a locking system with elastic clips on the basis and clasps on the cover, two hexagonal withdrawal clasps permitting up to 36 possibilities (voltage, function) and a removable label-holder on front face. Pluggable on the following sockets : SVB, SPVB, SVDL, SPVDL, SRDL 4,8 and SRC.
Instantaneous relays 1 contact / Model BIV-105
TEC Automatismes ,Instantaneous relays 1 contacts / BIV-105, Monostable instantaneous relay. 1 RT - 10 A BIV-105 are terminals for mounting onto rails of 35 mm or G. They are characterized by a compact conception incorporating an instantaneous relay 1 RT - 10 A. Its special character makes it a basic element for system interfaces realization
Instantaneous relays 2 contacts / Model CAQ
MTI Instantaneous relays 2 contacts / CAQ Instantaneous relay with rapid memory, Pluggable on socket with a withdrawal clasp and square guide pins which can act as a key to ensure that the correct relay is used at the correct voltage
Flashing relays 2 contacts / Model CAP
Sabit süreli darbe rölesi. 1 dürtü temas ve 2 CO rehber. Doğru röle doğru voltajda kullanılmasını sağlamak için bir anahtar olarak hareket edebilir bir geri çekilme toka ve kare kılavuz pimleri ile soket üzerinde Takılabilir ( bu sitenin teknik destek sayfalarında bizim çekilme kılavuzuna bakın ) aşağıdaki yuva üzerinde Takılabilir: EVB1 / CA, ERC1CA veya ERDL1CA.