Instantaneous relays 2 contacts / Model CAQ

TEC AUTOMATISMES / MTI

**Instantaneous relays 2 contacts / Model CAQ**
MTI Instantaneous relays 2 contacts / CAQ rear wiring socket with clips ERDL2/CA rear wiring socket / PCB mounting ERC2/CA front wiring socket / screw terminals EVB2/CA

Description
Instantaneous relay with rapid memory. Pluggable on socket with a withdrawal clasp and square guide pins which can act as a key to ensure that the correct relay is used at the correct voltage (see our withdrawal guide in the technical support pages of this site) Pluggable on the following sockets : EVB2/CA, ERC2/CA or ERDL2/CA.

Dimensions

Operation principle
This relay is a rapid memory which acts when it receives an impulse with duration > 0.5 ms (terminal 14). This information is re-sent (tipping of the two CO contacts) when validated by action on terminal 13 (validation). This information is directly re-sent il terminals 13 and 15 are linked. Return to rest state is made by cutting-off terminal 15 (reset). See the operation diagram hereafter

Technical features
Function	instantaneous
Presentation	under cover
Connection	on front or rear wiring socket
Number of mechanical operations	35.000.000
Operating temperature	- 5°C to + 40°C
Storage temperature	- 40°C to + 70°C
Climatic protection	optional reinforced climatic protection
Shock voltage	3 KV (wave 1,2/50 µs)
Dielectric strength	2200 V eff
Weight	200 g.
Protection level	IP 40 (according to NFC 20-010)
Resistance to mechanical shocks	severity 50 A (according to NFC 20-608)
Resistance to vibrations	0,35 mm / 10-55 Hz (according to NFC 20-616)

Coil data
	Direct current	Alternative current
Min. nominal voltage DC	12 V
Min. nominal voltage AC	220 V
Operating range	-20/+10% of nominal voltage
Power requirement	4 W permanently - 0,5 W control impulse

Contacts
Number of contacts	2
Max. load current	8 A per contact
Low power switching	0,1 VA with min voltage 1 V and/or I min 1 mA

DIRECT CURRENT

Contacts rating
Power supply in DC - connection on DC	Power supply in AC - connection on DC

ALTERNATIVE CURRENT
power supply in AC or DC - connection on AC

Operation diagram

see detailed operation diagram here above

Versions
CAQ relay with reinforced climatic protection CAQP relay with control by positive polarity CAQN relay with control by negative polarity CAQ relay with impulse < 0,5 ms

. TEC AUTOMATISMES / MTI Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır

MTI Instantaneous relays 2 contacts _CAQ

Ürün

İsminiz *

Firma İsmi

E-posta Adresi *

Telefon *

Mesajınız

Flashing relays 2 contacts / Model CAK
Flashing relay with fixed rythm - 2 CO contacts - 5 A. Pluggable on socket with a withdrawal clasp and square guide pins which can act as a key to ensure that the correct relay is used at the correct voltage (see our withdrawal guide inthe technical support pages of this site). Pluggable on the following sockets : EVB2/CA, ERC2/CA and ERDL2/CA.
Instantaneous relays 2 contacts / Model CAQ
MTI Instantaneous relays 2 contacts / CAQ Instantaneous relay with rapid memory, Pluggable on socket with a withdrawal clasp and square guide pins which can act as a key to ensure that the correct relay is used at the correct voltage
Flashing relays 2 contacts / Model CSM
Multifunction, multi-voltages, multirange timer relay - 2 timed contacts/2 instantaneous contacts - 3 A. Pluggable on the following sockets : SVB, SPVB, SRC, SVDL, SPVDL and SRDL 4.8.
Flashing relays 2 contacts / Model CAP
Sabit süreli darbe rölesi. 1 dürtü temas ve 2 CO rehber. Doğru röle doğru voltajda kullanılmasını sağlamak için bir anahtar olarak hareket edebilir bir geri çekilme toka ve kare kılavuz pimleri ile soket üzerinde Takılabilir ( bu sitenin teknik destek sayfalarında bizim çekilme kılavuzuna bakın ) aşağıdaki yuva üzerinde Takılabilir: EVB1 / CA, ERC1CA veya ERDL1CA.
INSTANTANEOUS AND FUNCTION RELAYS 2 contac / Model CSP
Impulse relay with fixed duration - 2 CO contacts - 6 A. CSP relay is equipped in its standard version of : a locking system with elastic clips on the basis and clasps on the cover, two hexagonal withdrawal clasps permitting up to 36 possibilities (voltage, function) and a removable label-holder on front face. Pluggable on the following sockets : SVB, SPVB, SVDL, SPVDL, SRDL 4,8 and SRC.

Instantaneous relays 2 contacts / Model CAQ

Operation diagram

ALFABETİK MARKA LİSTESİ

Sertifikalarımız

E-Bülten Listemize üye olun !